Santec 4050PR-TM User Manual

MODEL NUMBER

PLEASE READ THE INSTRUCTIONS COMPLETELY
BEFORE BEGINNING THE INSTALLATION.

11

33

22

4050PR10-TM
4050PR41-TM

4050PR23-TM
4050PR75-TM

ESTATE SERIES TOWER COLLECTIONESTATE SERIES TOWER COLLECTION

ROMAN TUB FILLER TRIM WITH “PR” HANDLESROMAN TUB FILLER TRIM WITH “PR” HANDLES

66

77

44

55

USE ROUGH P0385

(NOT INCLUDED)

33

##

Complete Spout Assembly *

1

Aerator Housing *

2

Complete PR Lever Handle

3

Set Screw

4

Spout Plug

5

Allen Key for Roman Tub Spout *

6

O-ring for the spout plug

7

* Please specify the finish when ordering the part.

PART

DESCRIPTION

Assembly *

PART #

PS-5T00S

P0943-U

00PR

PM-039

P0-257

PM-445

INSPECTED BY

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION

AFTER FLUSHING, SHUT OFF BOTH SUPPLY LINES

MINIMUM HOLE SIZE FOR THE SPOUT AND HANDLE TRIM IS 1 1/4” AND MAXIMUM IS 1 1/2”

4050PR _ _-TM

1. ROUGH INSTALLATION

DO NOT REMOVE THE SPOUT PROTECTANT HOOD PRIOR TO TRIM INSTALLATION

A - Install P0285 roman tub rough prior to installing the trims.

(Roughs are sold separately).

2. SPOUT INSTALLATION

A - Remove the faucet from the box.

- From the top of the deck, insert the spout (1) onto the top of quick connect shank.

- Align the spout and tighten the set screw (6) with the Large Allen Key (8).
Insert the spout plug (9) into the spout back hole.

Note: for better installation it is advisable to place silicone caulking around all holes
on the top of the deck

A

Hot ValveHot Valve

A

Large Allen Key

HOT WATER

HOT WATER

SUPPLY

SUPPLY

Metal washer
Brass lock nut

COLD WATER

COLD WATER

SUPPLY

SUPPLY

Cold ValveCold Valve

3. HANDLE TRIM INSTALLATION

A - Screw the handle trim (5) onto the upper lock nut of installed valve.

- Adjust the handle alignment in respect to the spout.

- Make sure that the handle turns freely in both direction and tighten
the brass lock nut firmly. If the handle is scraping against the stem,
lower the valve body to reduce the friction.

- Repeat the same procedure for the oppose side handle.

A

Upper Lock Nut

rubber washer

Fiber Washer

Brass lock nut

PAGE 02