Santec 2529LA User Manual
ITEM NUMBER
2.37"
3.13"
1.975"
7.525"
2529LA _ _-_ _
LEAR COLLECTION
WALL MOUNT WIDESPREAD FAUCET WITH “LA” HANDLES
11
99
1010
1111
22
##
Wall Mount Widespread Spout *
1
Complete LA Handle for Shower *
2
Complete Corner Valve - Left
3
Complete Corner Valve - Right
4
Regular Adaption Kit for Shower
5
Hot Cartridge for Left Corner Valve
6
Cold Cartridge for Right Corner Valve
7
Allen Key for Set Screws
8
Aerator Washer
9
Aerator Basket with Restrictor
10
Aerator Housing *
11
* Please specify the finish when ordering the part.
PART
DESCRIPTION
PS-2L00S
00YY-LA
SA-Corner-L
SA-Corner-R
PM-3
P0418
P0419
PM-033
PM-306
PM-305
P0952-U
PART #
33
55
44
66
77
88
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
PAGE 01
INSTALLATION INSTRUCTIONS
FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION
.
AFTER FLUSHING , SHUT OFF BOTH SUPPLY LINES.
MINIMUM HOLE SIZE FOR THE HANDLE TRIMS IS 1 5/8” AND MAXIMUM OF 1 3/4”
INSTALLATION INSTRUCTION
2529LA _ _
INSTALLING THE VALVE WITHOUT THE TRIM
1- If the valve is installed first without the trim, please leave
3 1/8” to 3 ½” space between the center of the inlet and the
finished wall. This will leave enough thread length to be
adjusted when the trim is installed.
WARNING: Where tile construction is planned for the
finished walls, allow for the extra thickness
dimensions when roughing in the valves.
INSTALLING THE VALVE WITH THE TRIM
1- Install the valve onto the wall with 2” space
between the center of the valve inlet and the
finished wall.
Screw the handle flange with the flange washer
onto the handle bell and tighten it firmly.
3 1/8 ” ~ 3 ½”
center of IN port
FLANGE WASHER
HANDLE FLANGE
ALL THREAD
finished wall
HANDLE BELL
STEM
HANDLE
2- Screw the handle bell, flange and washer onto
the all thread, press them firmly against the wall
and mark the position. Remove the handle bell,
flange and washer and cut off the excess thread.
Reinsert the handle bell, flange and washer onto
the all thread.
ALL THREAD
STEM
PAGE 02
Loading...