Santec 2029XL User Manual

ITEM NUMBER

9

1

7.896"

1.93"

3.085"

10

8

Ø2.500"

2

2.80"

2.83"

Ø2.25"

2029XL _ _-_ _

LINCOLN COLLECTION
WALL MOUNT WIDESPREAD FAUCET WITH “XL” HANDLES

##

Wall Mount Widespread Spout *

1

Complete XL Handle for Shower *

2

Complete Corner Valve - Left

3

Complete Corner Valve - Right

4

Regular Adaption Kit for Shower

5

Hot Cartridge for Left Corner Valve

6

Cold Cartridge for Right Corner Valve

7

8

Aerator Washer

Aerator Basket with Restrictor

9

Aerator Housing *

10

* Please specify the finish when ordering the part.

PART

DESCRIPTION

PART #

PS-2L00-U

00YY-XL-C cold
00YY-XL-H hot

SA-Corner-L

SA-Corner-R

PM-3

P0418

P0419

PM-306

PM-305

P0952-U

33

55

44

66

77

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION

.

AFTER FLUSHING , SHUT OFF BOTH SUPPLY LINES.

MINIMUM HOLE SIZE FOR THE HANDLE TRIMS IS 1 5/8” AND MAXIMUM OF 1 3/4”

INSTALLATION INSTRUCTION

2029XL _ _

INSTALLING THE VALVE WITHOUT THE TRIM

1- If the valve is installed first without the trim, please leave
2-1/2” to 2-3/4” space between the center of the inlet and the
finished wall. This will leave enough thread length to be
adjusted when the trim is installed.

WARNING: Where tile construction is planned for the
finished walls, allow for the extra thickness
dimensions when roughing in the valves.

INSTALLING THE VALVE WITH THE TRIM

1- Install the valve onto the wall with 2-1/2” space
between the center of the valve inlet and the
finished wall.

center of IN port

FLANGE WASHER

4” ~ 4 1/8”

HANDLE FLANGE

HANDLE BELL

ALL THREAD

finished wall

HANDLE

SCREW

STEM

BUTTON

CAP

2- Screw the handle bell with the flange and washer onto
the all thread, press them firmly against the wall.
Mark position, remove the bell and cut off excess thread.
Reinsert the handle bell onto the all thread and press all
parts firmly against the wall.

ALL THREAD

STEM

PAGE 02