Santec 2027LV User Manual

ITEM NUMBER

10.785"

1.93"

3.085"

11

9

3.205"

4.522"

3.468"

Ø2.325"

Ø2.500"

2

10

1

2027LV _ _-_ _

LINCOLN COLLECTION
WALL MOUNT WIDESPREAD FAUCET WITH “LV” HANDLES

##

Wall Mount Widespread Spout *

1

Complete LV Handle for Shower *

2

Complete Corner Valve - Left

3

Complete Corner Valve - Right

33

44

4

Regular Adaption Kit for Shower

5

Hot Cartridge for Left Corner Valve

6

Cold Cartridge for Right Corner Valve

7

Allen Key for Set Screws

8

Aerator Washer

9

Aerator Basket with Restrictor

10

Aerator Housing *

11

* Please specify the finish when ordering the part.

PART

DESCRIPTION

PART #

PS-KL00-U

00YY-LV

SA-Corner-L

SA-Corner-R

PM-3

P0418

P0419

PM-306

PM-305

P0952-U

55

77

66

88

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION

.

AFTER FLUSHING , SHUT OFF BOTH SUPPLY LINES.

MINIMUM HOLE SIZE FOR THE HANDLE TRIMS IS 1 5/8” AND MAXIMUM OF 1 3/4”

INSTALLATION INSTRUCTION

2027LV _ _

INSTALLING THE VALVE WITHOUT THE TRIM

1- If the valve is installed first without the trim, please leave
3 ½” ~ 4 5/8” space between the center of the inlet and the
finished wall. This will leave enough thread length to be
adjusted when the trim is installed.

WARNING: Where tile construction is planned for the
finished walls, allow for the extra thickness
dimensions when roughing in the valves.

INSTALLING THE VALVE WITH THE TRIM

1- Install the valve onto the wall with 2-1/2” space
between the center of the valve inlet and the
finished wall.

3 ½” ~ 4 5/8”

center of IN port

FLANGE WASHER

HANDLE FLANGE

ALL THREAD

STEM

finished wall

HANDLE BODY

2- Screw the handle flange with the washer onto
the all thread, press them firmly against the wall.

ALL THREAD

STEM

PAGE 02