ITEM NUMBER
1434LM _ _-_ _
ALPINE COLLECTION
PRESSURE BALANCED TUB AND SHOWER WITH “LM” HANDLE
33
22
11
55
H
C
44
1111
66
S
77
##
Complete Shower head *
1
Shower Arm *
2
Shower Flange *
3
Complete LM Handle for Shower *
4
Tub/shower Trim Plate *
5
Complete Wall Mount Tub Spout *
6
Pressure Balanced Tub/Shower Valve
7
Trim Plate Grommet
8
Diverter Knob *
9
10
Allen Key for Set Screw
11
Adapter for Handle Flange
PART
DESCRIPTION
PART #
P0285
P0286
P0287
00YY-LM
PH29750
P0281
PB-3950
PM-465
P0258
P0477
T
88
99
* Please specify the finish when ordering the part.
1010
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
PAGE 01
INSTALLATION INSTRUCTIONS
1434LM _ _
DESCRIPTION
This product is precision engineered to provide satisfactory performance provided it is installed and operated in
accordance with our recommendations contained in this manual. In order to fully enjoy the comfort, safety and the
reliability of your pressure balancing valve, be certain to familiarize yourself with the contents of this manual.
WALL LINE
SPECIFICATIONS AND DIMENSIONS
½”
78"
(1981 mm)
Minimum operating pressure 20 psi
Maximum operating pressure 145 psi
Maximum test pressure 500 psi
Hot and cold water inlets ½" IPS
½”
33"
Shower outlet ½" IPS
Flow capacity 5 USGPM@ 50 psi
Finished wall adjustment : see Illustration B
FLOOR
LINE
INSTALLATION
NOTE: Failure to follow these instructions may cause damage or improper operations and nullify the warranty.
ROUGH IN
- Make sure the water supplies are off.
- Remove all the trim items (plate, handle and flange) before installation.
- Secure the valve firmly against the stud. Make sure the ½" shower outlet is in the up position.
- Make sure to flush or raise grouting on the tiled wall surface.
- Adjust the All Thread depth against the Teflon Washer and Limit Stop.
Screw the All Thread against the Teflon washer until it is pressured gently against each other.
- Tighten firmly the Lock Nut against the Lock Plate.
- Position the valve using the dimension shown in the illustration B.
3.00”
S
All Thread
Stem
Trim Plate
FLANGE ADAPTER
FLANGE WASHER HANDLE FLANGE
HANDLE BELL
HANDLE
Lock Nut
Lock Plate
Diverter Knob
T
Diverter Rod
Trim plate grommet
ILLUSTRATION B
PAGE 02