OWNER’S MANUAL
MANUAL DE INSTRUCCIONES
19" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER TELEVISOR LCD TFT DE 19" CON SINTONIZADOR DIGITAL
HDLCD1908
HDLCD1908A
HDLCD1908B
HDLCD1908C
ESPAÑOL ENGLISH
ATTENTION
ATENCION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
Si usted a comprado un control de remoto universal, por favor comunicase con el fabricante para el código de programación requerido.
AIR/CABLE MODE SELECTION
SELECCION DE MODO DE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode. If not using Cable TV, set this menu option to the “Air” position.
Al salir la unidad de fábrica, la opción Signal Type se ajusta al modo de “Cable” (Televisión por cable). Si no utiliza CATV, ajuste esta opción de menú al modo de “Air”.
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL
SI REQUIERE CONTACTAR SERVICIO AL CLIENTE POR FAVOR TENGA EL NÚMERO DE
MODELO LISTO ANTES LLAMAR
CUSTOMER SERVICE – 1-800-289-0980
SERVICIO AL CLIENTE – 1-800-289-0980
ORION WEBSITE
SITIO WEB DE ORION
FOR INFORMATION ON OUR OTHER PRODUCTS AND RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT PARA INFORMACIÓN SOBRE OTROS PRODUCTOS E INFORMACIÓN SOBRE RECICLAJE,
POR FAVOR VISITE NUESTRO SITIO WEB EN
www.orionsalesinc.com
Before operating the unit, please read this manual thoroughly. Antes de usar la unidad, lea detenidamente este manual de instrucciones.
ENGLISH
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment.
The lamp(s) within this product contain mercury. Disposal should be in compliance with local, state or federal laws.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
Record the model number and serial number.
Model number _______________ Serial number _______________
2
IMPORTANT SAFETY INSTRUCTIONS
1) |
Read these instructions. |
|
|
2) |
Keep these instructions. |
|
|
ENGLISH |
|||
3) |
Heed all warnings. |
||
|
|||
4) |
Follow all applicable instructions. |
|
|
5) |
Do not use this apparatus near water. |
|
|
|
|||
6) |
Clean only with a clean dry cloth. |
|
|
7) |
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. |
|
|
8) |
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including |
|
|
|
amplifiers) that produce heat. |
|
|
9) |
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades |
|
|
|
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The |
|
|
|
wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, |
|
|
|
consult an electrician to replace the obsolete receptacle. |
|
|
10) |
Protect the power cord from being walked on or pinched particularly at plug, and the point where it exits |
|
|
|
from the apparatus. |
|
|
11) |
Only use attachments/accessories specified by the manufacturer. |
|
12)Use only a cart, stand, tripod, bracket, or table designed to support the weight and size of the unit. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damage, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
PORTABLE CART WARNING (symbol provided by RETAC)
S3126A
15)Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.
16)An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
17)Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18)Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
19)If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
|
ANTENNA LEAD IN WIRE |
|
GROUND |
ANTENNA |
|
CLAMP |
||
|
DISCHARGE UNIT |
|
|
(NEC SECTION 810-20) |
|
ELECTRIC SERVICE |
GROUNDING CONDUCTORS |
|
EQUIPMENT |
||
(NEC SECTION 810-21) |
||
NEC-NATIONAL ELECTRICAL CODE |
GROUND CLAMPS |
|
POWER SERVICE GROUNDING |
||
S2898A |
ELECTRODE SYSTEM |
|
|
(NEC ART 250, PART H) |
3
IMPORTANT SAFETY INSTRUCTIONS
20)When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21)Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
22)When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.
23)Sudden high volume sound may cause hearing or speaker damage. When you use headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage.
24)Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire.
25)This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product. Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers. Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/ product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
4
IMPORTANT SAFETY INSTRUCTIONS
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit.
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
• Do not install the LCD Panel near electronic equipment that is susceptible to electromagnetic waves. Some equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.
SAFETY PRECAUTIONS
ENGLISH
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
10cm
10cm
Notes when mounting the LCD TV on a wall
• If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV for advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LCD TV.
• Bracket holes: To attach a wall mounting bracket (not supplied) remove the screws and attached where indicated in the drawing right.
• This manufacturer recommends professional installation.
• Utilize an appropriate bracket and fasteners, sufficient to accommodate the size and weight of the unit.
• Assure the wall to which the unit is to be mounted will safely support the size and weight of the unit, using the bracket and fasteners you have selected.
• Keep cords and cables connected to this flat panel display out of reach of children.
Bracket holes
5
Contents
PREPARATIONS |
|
IMPORTANT SAFETY INSTRUCTIONS........................................ |
3 |
SAFETY PRECAUTIONS .............................................................. |
5 |
Contents ........................................................................................ |
6 |
Features......................................................................................... |
7 |
Power source ................................................................................. |
7 |
Parts and functions ........................................................................ |
8 |
Remote control .............................................................................. |
9 |
Antenna connections ................................................................... |
10 |
Cable TV connections.................................................................. |
11 |
Connections to other equipment.................................................. |
12 |
Setting the language.................................................................... |
15 |
OPERATION |
|
Memorizing channels................................................................... |
15 |
TV operation ................................................................................ |
16 |
Labeling channels........................................................................ |
17 |
Labeling video inputs ................................................................... |
18 |
Setting the V-Chip ........................................................................ |
18 |
Closed Caption ............................................................................ |
19 |
CC advanced............................................................................... |
20 |
Adjusting the picture preference .................................................. |
20 |
Picture control adjustment ........................................................... |
21 |
Selecting the color temperature ................................................... |
21 |
Setting the picture size................................................................. |
21 |
Film Mode.................................................................................... |
22 |
Picture control adjustment in the PC mode .................................. |
22 |
DNR............................................................................................. |
23 |
Sound control adjustment ............................................................ |
23 |
Selecting Stereo/Second Audio Program (SAP) .......................... |
23 |
Selecting the audio language....................................................... |
23 |
Adjusting the back lighting ........................................................... |
24 |
Setting the Auto Shut Off ............................................................. |
24 |
Resetting your settings ................................................................ |
24 |
Reception disturbances ............................................................... |
25 |
OTHERS |
|
Troubleshooting ........................................................................... |
26 |
Specifications .............................................................................. |
27 |
LIMITED WARRANTY ................................................................. |
28 |
6
Features
• |
Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. |
|
|
• |
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for |
|
|
• |
hearing impaired viewers. |
|
ENGLISH |
V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is |
|
||
• |
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control |
|
|
• |
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. |
|
|
Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be programmed for up |
|
|
|
|
to 120 minutes to turn off automatically. |
|
|
• |
encoded with this information. V-chip will allow you to set a restriction level. |
|
|
|
|
||
Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby |
|
|
|
• |
Digital sound can produce the effect of being in a movie theater or a concert hall. |
|
|
S-Video/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component |
|
|
|
• |
can be connected to this unit. |
|
|
Video Input Jacks - This unit is equipped with 3 types of video input jacks. The component video in jacks and |
|
|
|
|
S-video in jack enable you to watch the DVD player or the video devices with high quality picture. |
|
|
• On-Screen 3 Language Display - You can select one of 3 languages, English, French or Spanish for on- |
|
|
|
|
screen programming. |
|
|
|
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of |
|
|
|
Dolby Laboratories. |
|
|
Power source
TO USE AC POWER
1.Connect the AC cord plug into this unit’s AC INPUT jack. 2.Connect the AC cord into an AC outlet.
Wider Hole AC Outlet
and Blade
AC 120V, 60Hz
AC cord (supplied)
NOTE:
• Please make sure to insert the cord securely at both the LCD TV and the wall outlet.
• The AC cord has a grounding-type AC line plug. If the supplied AC cord does not match your AC outlet, contact a qualified electrician, do not defeat the purpose of a grounding plug.
WARNING:
• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.
• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.
CAUTION:
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.
• DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL SHOCK.
• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS RECOMMENDED. CONTACT CUSTOMER SERVICE AT 1-800-289-0980.
7
Parts and functions
Front |
Top |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INPUT/ENTER |
|
|
VOLUME |
|
|
|
|
|
POWER button |
||||||
|
|
||||||||||||||
button |
+/– buttons |
||||||||||||||
|
MENU button |
CHANNEL ▼/▲ buttons |
|||||||||||||
POWER indicator
Red: Standby
Green: On
Remote sensor
Rear side
AC INPUT jack
COMPONENT/AUDIO (L/R) IN jacks
VIDEO IN jacks (VIDEO/S-VIDEO/AUDIO (L/R))
RF (ANT) IN jack
COAXIAL DIGITAL AUDIO OUT jack PC AUDIO jack
PC MONITOR IN jack
To display the menu screen.
Press MENU button to display the menu screen.
CHANNEL ▲/▼ buttons, VOLUME +/– buttons and ENTER/INPUT button can be used to select the desired setting during the menu screen operations.
8
1 |
|
2 |
|
3 |
10 |
4 |
11 |
5 |
12 |
6 |
13 |
7 |
14 |
8 |
15 |
9 |
16 |
ENGLISH
1.POWER Button - Used to turn the power on/off to |
12.VOL (VOLUME) + / – / CURSOR / Buttons |
|
|||||||||||||||||
the LCD TV. |
|
|
|||||||||||||||||
|
|
- Used to operate the menu functions of the LCD |
|
||||||||||||||||
2.Direct Channel Selection Buttons (0-9) - Allows |
|
|
|||||||||||||||||
|
TV. Press the |
button to increase, or the button |
|
||||||||||||||||
direct access to any channel of the LCD TV. |
|
to decrease the sound level. |
|
||||||||||||||||
3.– Button -This button is the “–” button used |
13.ENTER Button - Use to enter or select |
|
|||||||||||||||||
when selecting digital channels. Also can display |
|
information for On-Screen operations. |
|
||||||||||||||||
the current channel number when viewing the |
14.EXIT Button - Press to remove setup menu. |
|
|||||||||||||||||
program. |
|
15.DISPLAY Button - When you press this button, |
|
||||||||||||||||
|
|
||||||||||||||||||
|
|
||||||||||||||||||
4.SLEEP Button - To set the LCD TV to turn off |
|
||||||||||||||||||
|
the current information will be displayed on a |
|
|||||||||||||||||
after a preset amount of time, use the SLEEP |
|
screen. To remove the display from the screen, |
|
||||||||||||||||
button on the remote control. |
/ |
|
press this button again. |
|
|||||||||||||||
5.CH (CHANNEL) + / – / CURSOR |
16.CCD Button - Used to display the Closed Caption |
|
|||||||||||||||||
Buttons - Used to operate the menu functions of |
|
menu screen. |
|
|
|||||||||||||||
the LCD TV, and to change the channels of the |
|
|
|
|
|||||||||||||||
LCD TV. |
|
|
|
|
|
||||||||||||||
Before using the remote control, batteries must first be installed. |
|
|
|||||||||||||||||
HOW TO INSTALL BATTERIES |
|
Use two “AAA” size batteries. The batteries may last |
|
||||||||||||||||
1. Open the battery compartment cover. |
|
|
|||||||||||||||||
|
approximately one year depending on how much the |
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
remote control is used. For best performance, it is |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
recommended that batteries should be replaced on a |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
yearly basis, or when the remote operation becomes |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
erratic. Do not mix old and new batteries or different |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
types. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BATTERY PRECAUTIONS |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These precautions should be followed when using |
|
||
2. Install two “AAA” batteries (supplied). |
|
batteries in this device: |
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
Use only the size and type of batteries specified. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
Be sure to follow the correct polarity when |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
installing the batteries as indicated in the battery |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
compartment. Reversed batteries may cause |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
damage to the device. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Do not mix different types of batteries together (e.g. |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alkaline and Carbon-zinc) or old batteries with fresh |
|
|
3. Replace the battery compartment cover. |
• |
ones. |
|
|
|||||||||||||||
If the device is not to be used for a long period of |
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
time, remove the batteries to prevent damage or |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
injury from possible battery leakage. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Do not try to recharge batteries not intended to be |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
recharged; they can overheat and rupture. (Follow |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
battery manufacturer’s directions.) |
|
|
9
Loading...