Sanitaire S647 User Manual

We suggest you record the model, type and serial
when inquiring about service.
date of purchase.
Model S647 Series
return this product to
the store. Call 1-800-800-8975*
www.sanitairevac.com for any
of the following:
accessories
Warranty Station
*En Mexico llame al (55) 5343-4384
www.sanitairevac.com
©2004 Electrolux Home Care Products Ltd. Printed in U.S.A.
..................................
2
......................................
2
Assemble
.....................................................
3
5
6
6
Warranty
.......................................................
7
To reduce the risk of electric shock,
this appliance
The plug will fi t in a polarized outlet only one way. If the
still does not fi t, con tact a qualifi ed electrician to install
the proper outlet. Do not change the plug in any way.
The bag may have come dislodged in shipping. Check
the bag to insure proper seating before attempting to
dust bag. Damage may result to the motor.
The cleaner is designed to pick up dirt and dust particles.
Avoid picking up hard or sharp objects with the cleaner
to avoid bag breakage, hose clogging, or possible motor
damage.
The instructions in this booklet serve as a guide to
telephone toll free:
3900 Peoria, Illinois 61612, USA.
The Sanitaire Limited Warranty for com plete service
any time. The bearings are permanently
When using an electrical appliance, basic precautions should
always be followed, including the following:
WARNING
To reduce the risk of fi re, electric shock, or injury:
Turn off the
switch and unplug the electrical cord when not in use and before
servicing.
when used by or near children.
outdoors, or dropped into water, return it to a service center
on cord, or pull cord around sharp edges or corners. Do not
surfaces.
carrying capacity.
Turn off all controls before unplugging.
the cord.
opening blocked; keep free of dust, lint, hair, and anything that
This vacuum cleaner creates suction and contains a revolving
cigarettes, matches, or hot ashes.
gasoline, or use in areas where they may be present.
3
2-Part
Cord Hook
C
Cord Hook
Screws
Assembly Packet is with ownerʼs guide.
A
Attach the Handle
slots in handle are correct, see Detail A.
Align the holes in the handle. Insert a 2-part bolt (A) in the
center of the handle and tighten.
away from the cleaner. Align the holes, insert the other 2-part
Attach Upper Cord Hook
Check to be sure slots in handle are correct, see Detail A.
and press hook handle (2) SNAPPING opposite inner tab
Attach Lower Cord Hook
cord hook. Snap the hook into the
so there is no strain on the cord
when the handle is lower.
Wrap the cord around the two cord hooks. Fasten the plug
to the electrical cord to prevent unwinding.
Attach Outer Bag
coupling must seat fi rmly against the motor
of the upper cord hook.
3. SNAP opposite
tab into slot
2. Press hook
around
Cord
Support
Support
Loading...
+ 4 hidden pages