Sani-Lav 504A, 504A-1.0, 504A-0.5, 504B, 504B-1.0 User Manual

HANDS-FREE WALL MOUNTED SINKS

AC OR BATTERY POWERED

Operating Manual for Hands-Free Wall Mounted Scrub Sinks

AC Models 504A, 504A-1.0 and 504A-0.5

Battery Models 504B, 504B-1.0 and 504B-0.5

1

Columbia does not recommend use with harsh chemicals.

NSF/ANSI Standard 2 - Food Equipment and NSF/ANSI 372 low-lead.

COLUMBIA SPECIFICATIONS

HANDS-FREE WALL MOUNTED SINKS

AC OR BATTERY POWERED

2

Parts List

(1) Wall mount sink

(1) AC or Battery powered sensor faucet assembly

(1) Wall-mounting bracket

(2) Support brackets

(1) Mixing check valve

(1) Strainer assembly with basket

Installation Instructions

Step 1

1. Establish sink location on the wall.

2. Determine desired height for the top of the backsplash from finished floor and draw a level
line which will be the top edge of the wall mounting bracket.

3. Hold the wall mounting bracket against the wall and mark the wall where the holes are. Drill
holes and secure bracket to the wall as shown in illustration A. Screws are not provided.

Step 2

1. Install strainer assembly.

2. Install faucets to the sink following the instructions provided with sensor unit.

3. Attach supply tube with elbow to back of faucet.

4. Install mixing check valve and compression fitting to control box of each sensor faucet.

Step 3

1. Position the sink onto wall bracket.

2. Loosely attach support brackets under sink and push against wall then mark holes for
drilling as shown in illustration B.

3. Remove support brackets from sink and drill holes for mounting fasteners (not provided).

4. Re-mount support brackets to sink and fasten to wall.

Step 4

1. Connect waste line to strainer assembly (s).

2. Mount sensor control box at desired location on wall.

3. Connect power line from sensor to control box.

4. Attach supply tube from faucet to control box.

5. Connect hot and cold water from the source to mixing check valve (s).

6. Remove aerator from the spout assemblies and flush water system. (see step 7 sensor
installation instructions)

7. Check connections for leaks.

8. Replace aerator onto the spout (s).

9. We recommend sealing top of backsplash to wall as shown in illustration C.

Tools Required

Tape Measure

Adjustable Wrench

Drill Motor and Drill Bits

Pipe Wrench

Level

Safety Glasses

Screw Drivers: 1 Phillips & 1 Standard

Pencil

Socket Wrench

Illustration A

Illustration B

Illustration C

1622 Browning Irvine, CA 92606-4809 Phone: [phone] Toll Free: 800.626.2117 Fax: [phone] www.columbiasinks.com email: [e-mail]

©2016 Columbia Products

COLUMBIA SPECIFICATIONS

504

HANDS-FREE WALL MOUNTED SINKS

AC OR BATTERY POWERED

3

Top

10.5”

(266.7mm)

1.5” (38mm)

11.5”

(292.1mm)

.25” R

6mm

2” drain hole

23” (584.2mm)

(292.1mm)

20” (508mm)

11.5”

2” (51mm)

17”

(431.8mm)

(520.7mm)

1.5” (38mm)

20.5”

Front Side

Wall-mounting bracket

10.5” (266.7mm)

1.5” (38mm)

2” (50.8mm)

4” (101.6mm)

.25” R (6mm)

9” (228.6mm)

35” (889mm)

suggested

floor to rim

height

20.5” (520.7mm)
2” (51mm)

7.5” (191mm)

45º

10.5” (266.7mm)

7” (177.8mm)

Hole Configurations

11.5”

(292.1mm)

.875” (22mm)

dia. hole (1)

21” (533.4mm)

11.5”

(292.1mm)

6” (152.4mm)

6.75” (171mm)

Wall Mounting Detail

1.5” (38mm)

2” (51mm)

.25” dia. hole (6mm)

wall hanger

Supply Line

.5 NPT

13.5”

(342.9mm)

back splash

1622 Browning Irvine, CA 92606-4809 Phone: [phone] Toll Free: 800.626.2117 Fax: [phone] www.columbiasinks.com email: [e-mail]

©2016 Columbia Products

HYDROTEK INTERNATIONAL, INC.

5055 Forsyth Commerce Rd., Ste. 124, Orlando, FL 32807

Phone (800)922

-

9883 / Fax (

866)670

-

5580

www.hydrotekintl.com

OPERATION & MAINTENANCE MANUAL

HYDROTEK MODEL #H

-

6700C FAUCET

TECHNICAL SUPPORTTEAM:

Michael

Hu

& Armin

Kharazi

Phone (800) 922

-

9883 ext. 105

Email: [e-mail] or [e-mail]

Solid Brass

AC or

Battery Powered

Automatic Faucet

6700C Series

ISO 9002 Certified

•

ADA Compliant. Meets all barrier

free codes

•

Conserves water and energy

•

Easily installed in new or retrofit

applications

•

Competitively priced for today's

commercial market

High Technology For

No Touch Operation

Features:

•

Promotes cleanliness & hygiene

•

Proven Hydrotek craftsmanship

and reliability

6700C Series

U.S. Patent: 6192530B1

•

ACCU

-

SENSE

adjustable sensor eyes.

•

Chrome plated, solid brass construction.

•

Wall mountable, waterproof control box

with armored, vandal resistant control and

power cables.

•

Preset/adjustable sensor range 6"

-

30" for

various installation requirements.

•

Standard automatic time

-

out feature. Preset

at 0 but adjustable to 15, 30 or 60 seconds.

Prevents accidental sink overflow.

•

Shut

-

off delay is adjustable from 1 second

(preset) to 8 seconds.

•

Includes in

-

line filters with clean

-

out trap to

reduce maintenance costs.

•

Standard 6" gooseneck spout and 2.0 GPM

laminar flow control.

•

Single

-

hole, wall/splash mounting.

•

All parts are field replaceable to ensure quick

and easy repair.

•

Same faucet, field switchable to/from AC

Powered or Battery Powered.

•

Slow closing, piston

-

operated solenoid valve

provides reliable and smooth operation without

water hammer.

•

Superior VSI silicone

elastomer

piston seals

are unaffected by chlorine,

chloromines

or

ammonia.

•

Control module automatically performs a

unique self

-

check of all electrical components.

•

No-touch system enhances hygiene in the

medical, institutional, food service industries,

etc.