Sanho SAHDCM2 User manual

iUSBport

CAMERA 2

iUSBport CAMERA

User Manual

2

FC C STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesirable operation.

2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.

NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with these
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

Reorientate or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.

RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.

Sanho Manufacturer's Limited Warranty

Sanho warrants to the end user, that this product, excluding content and
or software supplied with or on the product, will be free from material
defects in manufacture, will conform to Sanho's published product
specifications and be fit for normal use during the Warranty Period
specified below commencing on the date of purchase provided that the
product is legally placed on the market.
To make a warranty claim please contact Sanho at the telephone
number below or [e-mail] within the Warranty Period
and provide proof of purchase (showing date and place of purchase and
name of the reseller) and product name, type and number. You may
return the product after first obtaining a Return Material Authorization
number and following any other guidelines listed. For further information
see www.hypershop.com. Sanho may at its option repair this product or
provide you with an equivalent product; and if unable to repair or replace
the product, will refund the purchase price. Sanho will not be liable for
indirect or consequential damage (including loss of data), or for damage
caused by improper use (including use in an incompatible device and
use not in accordance with the instructions), or by improper installation,
unprofessional repair, modification or accident. This constitutes Sanho's
entire liability which will never exceed the price you paid for it, plus the
necessary costs you made for the warranty claim. Sanho products must
not be used in applications where failure could threaten injury or life,
such as life support systems. National, state and local laws may grant
you other rights that are not affected by this warranty.

Warranty Period: 1 Year

Sanho Corporation
47456 Fremont Blvd.
Fremont, CA 94538, U.S.A.
Tel: [phone]

Additional terms and conditions can be found at www.hypershop.com
Usage of this product constitute acceptance of these terms and
conditions.

Content

What's In The Box

Using iUSBport As USB Charger

Camera Control Overview

Live View & Focus Selection

Copy memory card to USB HDD

Standard Network Service List

Accessing iUSBport in Mac OS

Accessing iUSBport in Windows

The contents described in this manual is based on the iOS app
iUSBcam V1.2 and device Firmware V41. As software
continues to improve, the manual contents are subjected to
change without notice.

Battery Charging

Network Settings

Connecting To iUSBport

Connecting To DSLR

Camera Control

Settings

Function

Remote C

Video Record Mode

TV-Out (AirPlay & HDMI)

Upgrading the Firmware

Dashboard

apture Image

Client Mode

Full Screen Mode

Specifications

What's In The Box

USB Host Ports

WiFi Indicator

LCD
Screen

Main Unit

User Manual

iUSBport

CAMERA 2

Micro USB Charging Cable

Charging Indicator

Power Button

Micro USB
Charging Port

Camera Mount

Battery Charging

A USB charger is not included. It is recommend to use a high
power 10W( 5V/2.1A) and above USB charger(that comes with
iPads or tablets) to charge the battery.

When the LCD displays 'Low Battery', you should charge the
iUSBport . After displaying 'Low Battery' for 3 minutes, iUSBport will

turn off automatically.

turn off automatically.

The charging indicator will light up orange while charging and

green when fully charged(~7hours to full charge from empty)

After displaying 'Low Battery' for 3 minutes, iUSBport will

Charging Indicator

iUS Bcam2

Low Battery!

(This accessory is not included.)

USB Charger

Using iUSBport As USB Charger

iUSBport CAMERA is able to function as a USB charger for a wide
range of mobile devices. It outputs 5V, 1A from each of its two USB
ports, allowing it to charge up to two USB devices like smartphones
at the same time.

Connect device to USB port

Press & hold power button
for 3 seconds

USB charging indicator is
flashing

When done, press power button again to turn off iUSBport

Connecting To iUSBport CAMERA

Install 'iUSBcam' App on the mobile device (e.g. iPad)

Go to "Settings" on your mobile device (e.g. iPad)
Select "iUSBcam..." from the list of Wi-Fi networks.

Wait for Wi-Fi symbol to appear to indicate successful
connection with Wi-Fi network.

iOS 7.x.x will always try to connect to Apple's iCloud server
when connecting to WiFi. It may take up to 15 seconds before
the Wi-Fi network is ready.