SANHO iUSBPORTHD User Manual

User Manual

www.hyperdrive.com

1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesirable operation.

2. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.

NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with these instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorientate or relocate the receiving antenna.
Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician

for help.

RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.

FCC STATEMENT

Sanho warrants to the end user, that this product, excluding content
and/or software supplied with or on the product, will be free from
material defects in manufacture, will conform to Sanho's published
product specifications, and will be fit for normal use during the Warranty
Period specified below commencing on the date of purchase, provided
that the product is legally placed on the market.
To make a warranty claim please contact Sanho at the telephone
number below or e-mail [e-mail] within the Warranty
Period and provide proof of purchase (showing date and place of
purchase and name of the reseller) and product name, type and
number. You may return the product after first obtaining a Return
Material Authorization number and following any other guidelines listed.
For further information see www.hypershop.com. Sanho may at its
option repair this product or provide you with an equivalent product; and
if unable to repair or replace the product, will refund the purchase price.
Sanho will not be liable for indirect or consequential damage (including
loss of data), or for damage caused by improper use (including use in
an incompatible device and use not in accordance with the instructions),
or by improper installation, unprofessional repair, modification or
accident. This constitutes Sanho's entire liability which will never
exceed the price you paid for it, plus the necessary costs you made for
the warranty claim. Sanho products must not be used in applications
where failure could threaten injury or life, such as life support systems.
National, state and local laws may grant you other rights that are not
affected by this warranty.

Warranty Period: 1 Year

Sanho Corporation
47456 Fremont Blvd.
Fremont, CA 94538, U.S.A.
Tel: [phone]

Additional terms and conditions can be found at www.hypershop.com
Usage of this product constitutes acceptance of these terms and
conditions.

Sanho Manufacturer's Limited Warranty

Content

What's In The Box

Using iUSBport As USB Charger
Using iUSBport As Wireless Storage
Accessing iUSBportHD Storage
Before Unplugging USB Mass Storage Device
Normal Shutdown
Changing SSID & Password
Connecting iUSBport to an Existing WiFi Network
View Hard Drive S.M.A.R.T. Info
Options of iUSBportHD
Accessing iUSBportHD in Mac OS
Accessing iUSBportHD in Windows
Standard Network Service List
Copy

Specification

Battery Charging
USB Connection to PC

ing Memory Card to iUSBportHD

Upgrading the Firmware

What's In The Box

USB 2.0
Host Port

Power Button

WiFi
Indicator

Battery Indicator

LCD

Micro USB
Charging Port

Main Unit

This User Manual

Micro USB Charging Cable

SDXC Slot

HDD

Indicator

Micro USB 3.0
Device Port

USB 3.0 Cable

(This accessory is not included in the product package.)

Battery Charging

The product package does not include a USB charger. We
recommend that you use a tablet (e.g. iPad) USB charger

(5V/2.1A) to charge the battery.

The battery indicator will light up orange during charging. When
the battery is fully charged, the battery indicator will turn green.
(~6hrs to full charge from empty)

Battery
Indicator

USB Charger

USB Connection to PC

Turn off iUSBportHD before connecting it to a computer via
USB.

We recommend using the USB cable
provided with iUSBportHD.

Tip

The computer would not detect the iUSBportHD if it is
turned on.

U ModSB e