Advanced Color TFT LCD Monitor
17 inch SXGA TFT LCD Color Monitor
USER’S MANUAL
17 inch SXGA TFT LCD Color Monitor
CONTENTS
17 inch SXGA TFT LCD Color Monitor
0. Connections 3
1. Quick Start 3
2. U.S. FCC Class B Notice 4
3. Product Overview 5
4. Plug & Play 5
5. Usage Notice 6
6. Package Checklist 7
7. Front Button 8
8. OSD Operation 9
9. Troubleshooting 13
10. Specifications 14
11. Video Mode Support 15
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where
malfunction of these products can reasonably be expected to result in personal injury.
Customers using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify for any damage resulting from such improper use or sale.
The information presented in this document may form a part of quotation or contract under the
agreement of both parties. Otherwise, this datasheet is subjected to be changed without notice.
0. CONNECTIONS
17 inch SXGA TFT LCD Color Monitor
Speaker
Audio
In
DC in
12V Adapter
1. QUICK START
(1) Connect the 15-pin D-sub connector
to the VGA port of PC.
(2) Connect the opposite side of VGA
cable to TFT LCD monitor.
(3) Plug in the Audio cables to the proper
connecter of your monitor.
(4) Plug in the power cord to AC/DC
adapter power inlet and 110V / 220V
consent.
(5) Plug in the 12V DC output to TFT
LCD monitor.
Audio
Out
Analog
RGB
PC
VGA / Sound
17 inch SXGA TFT LCD Color Monitor
(6) Fit the stand part into the stand groove of Monitor (See the following Instruction).
(7) Adjust the tilt of your monitor.
(8) Turn on PC and TFT LCD monitor.
(9) Adjust the display. (SXGA, 1280x1024 pixels, 24 bit color)
* Disassembly of Stand
To disassemble the stand from your monitor, press down the stand with one hand
and hold the handle of Monitor with the other hand. Pull out the monitor from the
stand shaking gently the handle of monitor right and left.
Do not pull out with excessive strength. It might damage your monitor.
2. U.S. FCC CLASS B NOTICE
This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, if it is not
installed or used by the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, that could be determined by tuning the equipment on and off, the
user is encouraged to try to connect the interference with the following option:
• Re-orient or relocate the reception of antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that which the
receiver is connected to.
• Consult the dealer or an experienced Radio / Television technician for help.
17 inch SXGA TFT LCD Color Monitor
3. PRODUCT OVERVIEW
This 17” SXGA TFT LCD Monitor, accepts standard analog RGB signal.
This monitor supports SXGA and lower resolutions at the frame frequency up to 75Hz.
Lower resolution modes can be expanded to full screen through the expansion
algorithm. The user interface includes Audio, Display, Control, Auto Adjust, and
additional features.
This monitor contains high-end LCD controller, which have high performance and user
friendly interfaces. Fancy design monitor makes your desk simple and luxury.
The LCD monitor neither emits harmful rays nor requires space. Moreover, it conforms
to VESA DPMS (Display Power Management Signaling) requirement, therefore energy
consumption is remarkably little. Actual power consumption of LCD monitor is less than
35 watts during the operation, in contrast CRT monitor. These features guarantee you
with safe, clean, and healthy environment.
4. PLUG & PLAY
This monitor supports VESA DDC 1/2B requirements, therefore it is truly Plug-and-
Play for all PCs. No hardware or software change needed. It finds optimum setting
value automatically without any diskette installation by DDC process.
• DDC Process
Abbreviation of ‘Display Data Channel’.
The format of data exchange between Monitor & VGA Card.