Sang Fei Consumer Communications CTX600 User Manual

Download

Page 1

Discover Your Phone

Back of phone: Camera lens

Side volume keys

Left softkey

Navigation keys

Pick up key

Micro SD card slot

Microphone

Philips continuously strives to improve its products.Therefore, Philips reserves the rights to revise this user guide or withdraw it at any time without prior notice. Philips provides this user guide “as is” and does not accept, except as required by applicable law, liability for any error, omission or discrepancy between this user guide

262K colour

TFT LCD

Right softkey

Hang up and

on/off key

Alphanumeric keypad

Headset,

charger, and

data cable

and the product described. The device is meant to be connected to GSM/GPRS networks.

How to ...

Switch the phone On/Off

Enter your PIN code

Lock/unlock the keypad

Make a call Enter the phone number using

End a call Press Answer a call When the phone rings, press

Long press and release ).

Enter your PIN code using the keypad and press confirm.

Long press

the keypad and press

)

or L to

(

Page 2

Activate/ deactivate handsfree mode

Mute a call When the phone rings, press

Reject a call When the phone rings, press

Adjust conversation volume

Adjust ringer volume

In idle mode, enter the phone number using the keypad or select a contact in the phonebook. During a call, press activate the handsfree mode. When there is an incoming call, Press select Accept with handsfree and press

)

Press volume side keys to adjust the volume during a call.

When the phone is in idle mode, press

Sounds > Ring volume to adjust

the ring volume of an in coming call.

Options, then

> Settings >

Access all calls list

Access

Shortcuts

Access

Contacts

Access Create

message

Access My files Press

Access Main Menu

Access

Calendar

Go to previous menu

Quickly return to idle when browsing menus

Press

Press menu or in editing mode.

Short press

(

in idle mode.

Back when browsing

)

Page 3

Softkeys

The left and right soft keys (L and at the top of keypad area. Pressing the soft keys allows you to select the option displayed on the screen directly above them, including options during a call. The functions of the soft keys change according to the current context.

) are located

Operations of the headset

The following operations are applicable to headsets with only one key. When you enter a phone number in idle mode, short press the headset key to dial the number. To stop dialling, long press the headset key. During a call, short press the headset key to record or stop recording; long press to hang up the phone. When there is an incoming call, press the headset key to answer the call; long press to reject the call.

Main Menu

You can access the different features of your Xenium X600 phone from the main menu. The following table summarises the structure of the main menu, what the icons represent and the page number on which you can obtain more information regarding the menu

functions.

Entertainment Browser Media player

page 24 page 25

Camera Messages My files

page 31

Business Contacts Profiles

page 53

Connectivity Calls Settings

page 65

Press

in idle mode to access the main menu and

press

+, -, <

or press

0 - 9

page 36

page 59

page 67

to navigate through the icons and lists,

keys, and * or

page 28

page 49

page 62

page 71

keys to access

Page 4

the options and functions directly. You can also press

to set the browse style as List or Grid.

When navigating through a list, the scrolling bar on the right of the screen will indicate your current position in the list. Press corresponding options of the selected item in the list. Press

R Back

to return to the previous menu.

Select

to access the

Menu without SIM

If you do not have a SIM card, those menu items whose functions that cannot work without a SIM will be greyed out and not accessible.

Page 5

Table of contents

1. Getting Started ........................................... 7

Inserting the SIM card ..................................... 7

Switching on the phone .................................. 9

Charging the battery ....................................... 9

Insert a micro SD Card ................................ 10

Setting hotkeys ............................................... 10

2. Calling ............................................................. 12

Switch on the phone ..................................... 12

Switch off the phone ..................................... 12

Make a call ....................................................... 12

Answer and end a call ................................... 12

Options during a call ..................................... 13

Mute or unmute a call ................................... 13

Adjust speaker/earpiece volume ................13

Call recording ................................................. 13

Make an international call ............................ 13

Make an emergency call ................................ 14

Make a second call (Network dependent) ..... 14

Make a Conference Call (Network

dependent) ....................................................... 14

Switch calls (Network dependent) ............ 15

Call Handsfree ................................................ 15

IP Dial ............................................................... 15

Answer a call ................................................... 15

Reject a call ..................................................... 15

Answer a second call (Network

dependent) ...................................................... 15

Contact Picture .............................................. 15

3. Text and number entry ...................... 17

Input method .................................................. 17

Entering texts and numbers ........................ 17

Entering symbols ............................................ 18

Shift case .......................................................... 18

Delete ............................................................... 18

T9® English input .......................................... 18

Basic text input ............................................... 19

Pinyin Input ...................................................... 20

Stroke input .................................................... 21

4. Entertainment ........................................... 24

Games ............................................................... 24

JAVA ................................................................. 24

5. Browser ........................................................ 25

WAP ................................................................. 25

Push Inbox ....................................................... 27

Page 6

6. Media Player ............................................... 28

Music player .................................................... 29

7. Camera .......................................................... 31

Camera ............................................................. 28

Video recorder ............................................... 33

8. Messages ....................................................... 36

Create message .............................................. 36

Inbox ................................................................. 38

Sent ................................................................... 40

Outbox ............................................................. 41

Drafts ................................................................ 42

My favourites .................................................. 42

Spam box ......................................................... 43

SIM archive ...................................................... 43

Templates ........................................................ 44

E-mail ................................................................ 44

Advanced ......................................................... 45

Voice mail ........................................................ 46

Settings ............................................................. 47

9. My Files .......................................................... 49

Pictures ............................................................. 49

Sounds .............................................................. 50

Videos ............................................................... 51

Others .............................................................. 52

Memory status ................................................ 52

10. Business ...................................................... 53

Calendar ........................................................... 53

Alarm ................................................................ 54

Calculator ........................................................ 54

Voice recorder ............................................... 55

Secretary OTG ............................................... 55

Stopwatch ........................................................ 56

Countdown ..................................................... 56

Unit converter ................................................ 56

Firewall ............................................................. 56

Chinese festival (if available)......................... 57

Task.................................................................... 57

Lunar calendar (if available) .......................... 58

11. Contacts .................................................... 59

New contacts ................................................. 59

View contacts ................................................. 60

View group ...................................................... 60

Special numbers ............................................. 61

Advanced ......................................................... 61

12. Profiles ........................................................ 62

13. Connectivity ............................................ 65

Bluetooth ......................................................... 65

USB function ................................................... 66

14. Calls .............................................................. 67

View calls ......................................................... 67

Page 7

Call options ..................................................... 67

Clear history ................................................... 70

15. Settings ........................................................ 71

General ............................................................. 71

Display .............................................................. 73

Sounds .............................................................. 73

Connectivity .................................................... 74

Icons & Symbols ............................................ 76

Precautions ....................................................... 78

Troubleshooting ............................................ 83

Philips Authentic Accessories .............. 85

Trademark Declaration ............................ 86

Specific Absorption Rate Information .... 87

Limited Warranty ........................................ 88

Declaration of conformity ...................... 91

Page 8

1. Getting Started

Please read the safety instructions in the "Precautions" section before use.

Before you start using your phone, you must insert a valid SIM card supplied by your GSM operator or retailer. The SIM card contains your subscription information, your mobile telephone number, and a small quantity of memory in which you can store phone numbers and messages (for more information, see “Contacts” on page 59). You can also insert a memory card. This provides you with expanded memory capability, which allows you to store additional music, photo, and video files separate from the phone's built-in memory.

Inserting the SIM card

Remove the back cover

To insert the SIM card, you must first remove the back cover. Press on the back cover with your thumbs and slide the cover upwards. Then use your free hand to lift up the back cover as shown below.

Getting Started 7

Remove the battery

Put your finger at the top of the battery and lift the battery up from its slot.

You may lose all your personal settings if you remove the battery when the phone is switched on.

Page 9

Insert the SIM card

Make sure that the clipped corner of the SIM card is facing the correct direction (clipped corner at upper left) and the metallic contacts are facing downwards. Slide the SIM card into the card slot until it stops. When you remove your SIM card the first time, make sure that you smoothen the edges, otherwise you may have difficulty sliding in the card.

Replace the back cover

Replace the back cover by sliding it down into its slots, until it stops.

Replace the battery

With the metallic contacts facing downwards, press the battery down into its slot until it locks into place.

When inserting the battery, be careful not to damage the metallic connectors of the SIM card slot.

Switching on the phone

To switch on the phone, long press and release the key. Enter the PIN code if required (the 4 to 8 digit secret code of your SIM card). It is preconfigured and provided to you by your network operator or retailer.

)

8 Getting Started

Page 10

For more information on PIN code, see “Security” on page 72.

If you enter an incorrect PIN code 3 times in succession, your SIM card will be blocked. To unblock it, you must obtain the PUK code from your network operator.

Charging the battery

Your phone is powered by a rechargeable battery. The new battery is partially charged. A sound alert will be emitted to warn you when the battery level becomes low.

We recommend that you do not battery when the phone is switched on as you may lose all your personal settings as a result. If you do remove it, the date and time settings are only memorized for a short while. As such, you need to reset the information after you have installed the battery back again.

Once the battery and battery cover are installed, you can charge the phone. Plug in the connector as shown below. Then plug the other end into an AC power socket.

remove

the

The battery symbol indicates the state of charge. During charging, the charge indicators will scroll; it takes around 4 hours to fully charge the battery. When all the scroll bars are steady, the battery is fully charged. You can then disconnect the charger. Depending on the network and condition of use, talk time and stand-by time can go up to 16 hours* and 1440 hours (2 months)* respectively.

*Depending on the network conditions, user settings, method of use, etc the actual results may differ.

Keeping the charger plugged to the mobile phone when the battery is fully charged will not damage the battery. The only way to turn off

Getting Started 9

Page 11

the charger is to unplug it, so it is advisable to use an easily accessible power socket.

If you do not intend to use your phone for several days, we recommend that you remove the battery.

You can use the phone while it is charging. If the battery is completely flat, the battery icon will only reappear after a few minutes of charging.

Insert a micro SD card

1. Lift up the micro SD card cover on the lefthand side of your phone as shown below. If held properly, the card’s gold contacts will be facing upwards.

2. Gently slip the card into the micro SD card slot and press it down until the card locks into place.

To remove the micro SD card, push down the card into its slot and release it. The card will spring out of the slot.

The maximum capacity of micro-SD that X600 can support is up to 2GB.

Setting hotkeys

You can configure the numeric keys

>, L

and R to access your favorite features. Once

they have been set, you can simply long press the numeric key to access the corresponding features. Majority of the hotkeys have been preset and configured. To check the hotkey settings, go to Settings > General > Shortcuts > keypad. To change the hotkey setting, press the numeric key you wish to change and Press

Change, then select a feature to be

- 9, +, -,

10 Getting Started

Page 12

associated with the numeric key from the following list:

• Alarm • Bluetooth

• Calculator • Calendar

• View calls • Camera

• Contacts • Create message

• Firewall • Flight mode

•Games •Homepage

•Inbox •Languages

• Menu • Messages

• Meeting • Music

• My files • Profiles

•Ringtones •Shortcuts

• Tasks • Unit converter

•Flash dial •Voice recorder

• Secretary OTG • Empty

Numeric keys preconfigured as the default keys to enter “+”, access voice mailbox, activate Meeting profile and unlock the keypad respectively, and cannot be modified.

0, 1, #

and * have been

Getting Started 11

Page 13

2. Calling

This chapter describes the features and options related to making and receiving calls.

Switch on the phone

Long press ) to switch on the phone. You may set a security code (PIN code) on your phone to protect it from unauthorised use. When you have set a security code, you will be prompted to enter the corresponding security code when you switched on the phone.

1. Enter the PIN code. If you have entered the wrong number, press

2. Press

3. Once a network name is displayed on the

If you enter a wrong PIN code 3 times in succession, your SIM card will be blocked. To unblock it, you must request the PUK code from your operator. If you enter a wrong PUK code 10 times in succession, your SIM card will be permanently blocked and cannot be used

. The phone will validate the PIN code

and commence network registration.

screen, you are ready to make or answer a call. If there is no network name on the screen, you need to re-register.

Clear

to clear it.

anymore. If this happens, please contact your network operator.

Switch off the phone

At all times, you can long press ) to switch off the phone.

Make a call

You can make a call only when the network name appears on the screen.

1. Enter the phone number.

2. Press

(

to enter options menu, then select Dial.

to dial the number or press L Options

Answer and end a call

When receiving a call, the number of the caller may be displayed, depending on whether or not the person has chosen to display his or her ID. If the corresponding name is displayed instead of the number. Answer the call: press

Active flip option is On (see “General” on page 71).

End the call: press

(

or open the phone if the

)

or close the phone.

12 Calling

Page 14

Options during a call

During a call, you can press , to activate/cancel

Handsfree or press

following operations:

-Put the call on Hold

- Mute/Unmute the call

- Record phone conversation (which includes 3 sub-options:

party

and

- Make a New call

- End the current call

Options

to carry out the

Record both, Record the opposite

Record own

)

Mute or unmute a call

During a call, press

Unmute

. If you select deactivated. When you switch from one call to another, muting will be cancelled.

Options

Mute

and select

, the microphone will be

Mute

Adjust speaker/earpiece volume

During a call, call on hold or call waiting, you can press + / - side key to increase or decrease the volume (if you are not browsing the call options menu).

When the volume has been set, the call volume will take effect immediately and the settings will be applied to your subsequent calls.

Call recording

During a call, press access the 3 recording options; namely, (default), (applicable to two-party calls or multi-party calls). When you start recording, a recording icon will appear on the screen. When you end the call, the recording will stop and saved automatically in AMR format under

There is no limit to the length of the recording;

the recording will stop only when you press to stop the recording, when there is insufficient memory, or when the call has ended.

Record the opposite party

My files

Options

Sounds

and select

Make an international call

1. Long press 0 until "+"appears on the screen.

2. Enter the country code.

3. Enter the area code (normally without the 0 in front), followed by the phone number.

4. Press

(

to call directly.

and

Record

Record both

Record own

key

Calling 13

Page 15

Make an emergency call

You can make an emergency call anytime, irrespective of whether the mobile phone has been registered on the network.

1. In idle mode, enter the emergency call number (specific number in the caller's country)

2. Press

Note that an emergency call will not be stored in the call record.

3. Alternatively, if there is no SIM card, pressing

(

SOS can also bring you to the emergency

call screen, displaying the call number. Then press

(

or the OK softkey to directly make an

emergency call and the dial animation will be displayed.

Make a second call (Network dependent)

You can make a second call by putting the current call on hold:

1. During a call with Party A, you can enter Party's B number using the keypad.

2. Press

(

to dial Party B's number. Party A will

be put on hold automatically.

Make a Conference Call (Network dependent)

Your phone supports multi-party call of up to five members. The screen will display Conference call during the multi-party call. When there is a call waiting while you are already on the phone, you can carry out the following operations to establish the multi-party call:

1. Press

2. Select Conference Call from the call menu. The

During the multi-party call, you can answer a new incoming call or add a new member to the call by dialing the new member (the ongoing multi-party call will be put on hold automatically). Once the call is established, select Establish conference call from the call menu to add the new member to the multiparty call (you can add up to five members).

If you wish to separate one member from the call, you can select Split conference call during the multiparty call. To disconnect a member from the call, select End call in conference.

(

to answer the second call. The first

call will be put on hold automatically.

two calls will be combined and a conference call is established.

14 Calling

Page 16

Switch calls (Network dependent)

When you have one active call and one call on hold, you can press between the 2 calls.

L Options

, then select

Swap

to switch

Call Handsfree

During a call, press L

When the headset is plugged into the phone, you cannot activate handsfree mode.

Options

and select

Handsfree

IP Dial

You may select IP dial. When you select IP dial option, the mobile phone will automatically add the IP special service number preset by you in front of the phone number and then make IP dial. You can also long press

When you have entered several IP special service numbers, you will be prompted to verify them to avoid adding them repeatedly.

(

to activate IP dial.

Answer a call

Press ( to answer a call.

Reject a call

Press

)

to reject a call.

Answer a second call (Network dependent)

If you have activated

when there is a second incoming call. You can:

1. Press

2. Press

3. When there is one active call and one call on

• Conference call • Handsfree • Mute

• Record • End all calls • End calls

• View contacts • Menu

If you press the numeric keys, the notepad editor will opened under call waiting mode.

(

current call will be put on hold automatically.

)

with your current call.

hold, you can press carry out the following operations:

Call waiting

to answer the second call. The

to reject the second call and continue

, you will be alerted

, Swap

Contact Picture

This feature allows you to link a contact in your phonebook to a photo you have taken using the

or L

Options

Calling 15

Page 17

Camera function, or a picture you have downloaded via WAP or data cable. During a call, if the other party's name card is linked to a picture, the incoming call background will display the corresponding picture. This feature is referred to as Contact picture.

Contact picture is only available on the phone memory. The photo size should not be larger than 128 x 160 pixels.

16 Calling

Page 18

3. Text and number entry

Input method

Your mobile phone supports several input methods, which include:

• T9 Pinyin: Enter chinese characters with T9 Pinyin;

• T9 Stroke: Enter Chinese characters with T9 wubi and stroke components;

• T9 Traditional Chinese stroke: Enter Traditional Chinese characters with Wubi or stroke components;

• T9 English (T9eng/T9Eng): Enter English text using T9 English;

• Multi-Tap (abc/Abc/ABC): Press the keys that are marked with the corresponding letter you wish to enter. Press once to get the first letter on the key, press twice quickly to get the second letter and so on until the letter you want is displayed on the screen.

• 123: Enter numbers

This phone supports T9 Simplified Chinese association input method as well.

*During text editing, you can press input mode; the status bar on the screen will display your current input mode. represents Simplified Chinese Pinyin input mode;

represents Simplified Chinese stroke input

mode; represents Traditional Chinese stroke input mode; 『en』 represents T9 English input mode; ϒ≡ abcϒ≈ represents English alphabets input mode; 『123』represents numeric input mode. In addition, you can press

The text editor remembers the last input method you have used before you exit the editing screen. When you access the editor again, it will automatically select the last input method you have used.

to input punctuations.

Entering texts and numbers

You can input text in the editor using: T9 English input, English alphabets, Pinyin, Simplified Chinese Stroke or Traditional Chinese Stroke. In addition, there are two input methods for you to enter numbers and punctuations. The icon displayed on the screen shows the current input method. You can press Long press to activate or deactivate T9. Short press

to switch from one mode to another.

to switch

Text and number entry 17

Page 19

to enter punctuations or long press it to select

input language.

Entering symbols

In any input mode, press # to open/close symbols input screen. If the symbols occupy more than one screen, press

to confirm the symbol input.

+/-

to scroll up/down the pages. Press

Shift case

Press

to shift case in the English input editor.

Delete

When there are contents in the input row, press

Clear

to delete the rightmost character or symbol. The candidate area will be updated accordingly until the input row is cleared. Long press

Clear

When the input row is empty, press delete the character on the left of the cursor in the text area. Long press in the text area.

to clear the input row.

Clear

to clear the contents

Clear

will

T9® English input

What is it?

predictive Text Input is an intelligent editing

mode for messages, which includes a comprehensive dictionary. It allows you to quickly enter text. You need to press only once on the key corresponding to each letter needed to spell a word: keystrokes input are analysed and the word suggested by T9 window. If there are more than 3 candidates, a scroll bar is shown, press and choose from those proposed by the T9 in dictionary (see example below). input the word, press

How to use it?

Alphabets and symbols represented by each key are as follows:

is displayed at the pop-up

+ or -

to browse the list

built-

After you have

to confirm.

To input letters.

To browse the last or next candidate word.

To confirm the letter or word.

18 Text and number entry

Page 20

To enter the word «Home» in basic text input mode, you should therefore key 6, 6 (MN Letters, numbers and symbols are located on each key as follows:

O), 6 (MNO), 3, 3 (

Key

Letters and numbers

Space 1 @ _ # = < > ( ) & £ $ ¥

a b c 2 à ä å æ ç

d e f 3 é è D F

g h i 4 G ì

j k l 5 L

m n o 6 ñ ò ö ø

p q r s 7 b P Q S

t u v 8 ü ù

w x y z 9 W X Y

Input space

Switch text input mode

Input symbol

4, 4 (GHI) 6

DEF

Short press to clear a letter, long press

Clear

to clear all entries.

Shift case, select input mode. Long press to turn on/off T9 feature.

Short press to activate/deactivate punctuation mode, long press to select input language.

Example: How to enter the word "Home"

1. Press

2. Press

3. Press

4 6°6 3

first word on the list:

to browse and select

to confirm

, the screen displays the

Good

Home

Basic text input

If you wish to use basic text input mode, press to select "ABC" basic text input. This method requires multiple key presses to reach the desired character: the letter "h"is the second letter on the

key, so you must press

Using this mode requires you to press a key as many times as is equal to the order of the letter.

twice to enter "h".

Text and number entry 19

Page 21

Pinyin Input

Press * and select Pinyin input mode. Each Pinyin letter is represented by one of the numeric keys as shown below: (Note that Pinyin input mode is solely meant for the input of Simplified Chinese characters. You cannot input Traditional Chinese characters).

GHI

PQRS

Mode

ABC

JKL

TUV

DEF

MNO

WXYZ

Punctuation

The general steps of using Pinyin input method are as follows:

1. Enter Pinyin letters

2. Select Pinyin combination

3. Confirm Pinyin combination

4. Select from candidate list< or

Clear

> / +

to clear

(scroll list)

5. Confirm selection

6. Select and enter association character, or return

to step 1 to enter new words.

7. Or press

character input mode, then press

Back

to exit from association

to complete.

20 Text and number entry

Page 22

Enter the pinyin letters accordingly. Press once on the key corresponding to the pinyin letter without

Horizontal

Vertical

Left-falling

having to consider its position on the key. Pinyin input method will automatically select and list all possible combinations for you to select. For example, to input the character Pinyin letters『wang』, press

to select the desired pinyin combination for

『wang』 , then press

to confirm combination.

『王』, with the

9 2 6 4

and use

Right-falling

Mode

down

Over-

Special

Punctuation

As soon as you have selected and entered a character, the candidate list will be updated and a list of association characters will be displayed. Press

< or >

to select the desired association character

and press

to confirm entry. This speeds up the input process further. When you have finished editing a name on the

Back

phonebook or SMS, press association character input mode and press

to exit from

confirm completion of the editing process.

Stroke input

Press

to select stroke input mode. The strokes

are represented on each key as follows:

Text and number entry 21

Page 23

The basic steps of Stroke input are as follows:

1. Enter strokes

(excluding

)

Clear to

and

clear.

2. Select from candidate list

> /

(scroll list)

3. Confirm selection

Select and enter association character,

or return to step 1 to enter new strokes.

5. Or press

character input mode, then press

R Back

to exit from association

to complete

the editing.

The principle of stroke input is to dissect and separate every stroke of a chinese character according to sequence. When you wish to input the character, press the keys corresponding to the required strokes according to sequence to get the

desired character. The stroke input method in this phone classifies a chinese character into 5 basic strokes: (horizontal, vertical, left falling stroke, right falling stroke and over-down) as well as a special stroke. When the stroke you need does not correspond to the 5 basic strokes, replace it with the special stroke. The examples below will give you a clearer understanding of how to use stroke input method:

木∶

+ 2 + 3 + 4

田∶2

加∶

凉∶

陈∶

+ 5 + 1 + 2 + 1

+ 3 + 1 + 5

+ 6 + 4 + 1

+ 2 + 1 + 6

+ 4

22 Text and number entry

Page 24

Generally, you will be able to find a desired character before you finished entering all the strokes. After you have entered the name of the phonebook or SMS, press association character list and press completion of text editing.

The input mode for Traditional chinese stroke and Simplified Chinese stroke are similar, with the exception of the character coding.

R Back

to exit from the

to confirm

Text and number entry 23

Page 25

4. Entertainment

This section describes the games and additional tools installed on your mobile phone.

Some of the features described here are dependent on the configuration of your mobile phone, the country in which you purchased your mobile phone, and/or your service provider.

applications via WAP or USB and run them in the Java environment.

Games

Default games

This menu features games that are pre-installed in your mobile phone. Press menu from idle mode and select Entertainment >

Games.

to enter the main

Java

Your mobile phone features a Java run-time environment, which allows you to run Java applications, such as games downloaded from the network. You can also download games and other

24 Entertainment

Page 26

5. Browser

changes of configuration made by you or by the network operator. Please check with your network operator for the most updated information.

Homepage

Your phone comes with a WAP browser. You can obtain news, sports and weather information, as well as services from the internet via the WAP browser.

This feature is available only if your subscription includes WAP access services. The settings have been pre-configured (depends on country variants) and you do not need to modify them. For more information, please contact your network operator.

WAP

Normally, the phone would have been preconfigured. If you wish to add or modify the configuration parameters, you need to obtain the necessary information from your network operator before you proceed. Philips is not liable to give prior notification nor shall it bear any consequences for any failures arising from

Select this menu to access the homepage directly. You can also set the homepage address in the settings menu.

Bookmarks

You can save the current web page or the web pages that you frequently visit to the manage and organize them. When you enter the menu, a list of bookmark entries is displayed. To connect to the web address of a particular bookmark entry, select an entry using

or - and press

If there are no existing entries, you can select the following options to add and manage your bookmarks:

Add bookmark

Manage bookmarks

Edit the title and web address.

Delete or edit a bookmark entry.

Bookmarks

list,

Browser 25

Page 27

To add a new bookmark:

Go to Bookmark menu Press

Select Add Bookmark Press

Add a new bookmark Enter the Address and

To edit a bookmark:

Go to Bookmark menu Press

Select a bookmark you wish to edit

Edit the bookmark Edit the Title and URL of

to enter the

main menu from idle mode and select

Browser > Bookmarks.

Title of the new

bookmark and press

Save.

to enter the

main menu from idle mode and select

Browser > Bookmarks.

Press

Options. Then select

Edit and press

the bookmark and press

and press

Select.

Enter address

Enter the web address and press press

Back

to return to previous web page.

to connect,

History

This menu allows you to quickly access the last web page you have visited.

1. When you enter this menu, the web pages you have previously visited will be listed.

2. Select a web page on the list and press Then press

Open Info

Navigate Exit

Go to

History

Save as

Send as SMS

Settings

This menu allows you to configure the web settings for web browsing. Your phone may have been preconfigured with the settings of a specific network operator. If you are a subscriber of the network operator, you may start using your WAP browser immediately. Otherwise, you need to re-configure the settings.

Philips is not liable to give prior notification nor shall it bear any consequences for failures arising from changes in configuration made by

Options

to access the following:

26 Browser

Page 28

you or by the network operator, or changes in WAP address or contents made by the internet content provider. Please check with your network operator and your internet content provider for the most updated information.

The following options are available:

WAP profiles

lear c

Clear history

Allows you to configure the

profiles.

ache

Allows you to set the Clear cache.

Allows you to remove the web history.

Allows you to

Enable cookies

Show images,

WAP

Exit info

Push Inbox

Allows you to check your Push messages and configure your Push settings, such as select whether or not to accept Push messages, delete push messages, etc.

Browser 27

Page 29

6. Media player

Details View detailed information of the

selected track.

Playlists

The stored playlists are displayed on the screen. To

Music Player

This feature allows you to download music from the network, save the audio files, edit your playlist, and play music. The phone supports audio files in MP3 and AAC format. However, only MP3 format is supported with the bluetooth headset.

Trac ks

This feature allows you to play downloaded music in your Phone memory or Memory card (under

Sounds folder). From the listed tracks, use

select the music file you want to play and then press

Open to open the music player to play the

selected track or press

Options Description

Add to playlist

Delete track Delete the selected track.

Options.

Open the playlist, select a playlist and add the selected track to the playlist.

+/-

create a new playlist, select New playlist. Enter the playlist name and press playlist, press tracks that you want to add to the playlist. Then press playlist. You can create up to 10 playlist. You can press

Open to open the music player to play the selected

track or press

Options Description

Edit playlist Edit the playlist.

Rename playlist

Delete playlist

Tracks sequence

Details View detailed information of the

Done to confirm and store the songs in the

. Then press , Edit and select the

Modify the playlist name.

Delete the current playlist.

Modify the play sequence of the current playlist.

selected file.

. Then use

Options.

+/-

to select a

28 Media player

Page 30

Artists

A list of singer names is displayed on the screen. You can press

or , to display all tracks of the selected artist.

From the listed tracks, use file you want to play. You can press open the music player to play the selected track or press

Options Description

Open Open the music player to play the

Add to playlist

Delete track Delete the selected track.

Delete artist Delete all tracks of the same artist.

Details View detailed information of the

Options.

+/-

to select a certain artist and press

+/-

to select the music

Open to

selected track.

Open the playlist, select a playlist and add the selected track to the playlist.

selected track.

Last played

List the last 10 tracks you have played, and the last played track is displayed at the top of the list.

Settings

The available options include:

Options Description

Play in background

Play mode

Help

Refresh all lists

Allows you to listen to the music when you exit the music player application. You can select Ask

first, Always or Never.

Select between Repeat one, Repeat

all, Shuffle and repeat, Shuffle or Off.

Display descriptions on how to use the music player.

All tracks stored in the phone memory and the memory card will be refreshed.

Now playing

The screen displays the last played song. This function enables you to go on playing the last playlist you were listening to.

Keys operation

The keypad operations during music playback are as follows:

Key Op era tion

Media player 29

Page 31

key Short press to Start/Pause/resume

+ or - Adjust volume. Once you have set

L Options

R Back

Press L operations:

Play in background

Add to playlist

music playback.

Short press to select the previous song/next song. Long press to fast rewind/fast forward the track during playback.

the volume, the settings will be saved until the next time you adjust it again.

Open options menu.

Return to previous menu. When you exit the music player, the music playback will stop.

Options

to carry out the following

Allows you to listen to the music when you exit the music player application. You can select Ask

first, Always or Never.

Open the playlist, select a playlist and add the selected file to the playlist.

Play mode

Refresh all lists

Select between Repeat one, Repeat

all, Shuffle and repeat, Shuffle or Off.

All tracks stored in the phone memory and the memory card will be refreshed.

30 Media player

Page 32

7. Camera

Camera

Your mobile phone features a 2.0 mega pixel digital camera that allows you to take pictures and record videos, store them in your phone and memory card, use them as wallpaper or send them to your friends.

Please ensure that the camera lens is clean before you take pictures, as small dust particles can strongly affect the picture quality.

Camera mode

Consult the table below on how to carry out some common operations with your camera.

How to ...

Launch Camera Press

to enter the main menu from idle mode and select Camera. Then switch to

camera mode.

Zoom in/out Press side key +/-.

Only available for picture resolution of 640*480 or below.

Adjust brightness

Take a picture Press

Exit from Camera and return to idle mode

At any point in time, you can press cancel the current operation and return to idle mode.

Camera option menu

When the camera mode is activated and before a picture is taken, you can change a number of settings by pressing

Press +/- side keys.

Brightness level is -3 to +3. Default level is 0.

The picture will be automatically saved and stored in My files > Pictures.

Press

)

twice.

key or R Back

Options.

)

key to

31 Camera

Page 33

Options Description

Picture resolution

Picture Quality

View picture

Select image size: 1600*1200,

1280*1024, 1024*768, 640*480

and 176*220.

Select image quality: Super fine, Fine and Normal.

The last selected value will remain active until you change it again.

Enter My Files > Pictures to view the pictures taken.

Camera Mode

Advanced Storage location: Phone memory or

Photo preview option menu

Once you have activated the camera, simply press

to take a picture. The picture is automatically

saved and displayed on the screen. You can press

Color effects: Off (default), B&W, Sepia, Blue or Red.

The selected color effect will be displayed on the screen in real time.

Night mode: On or Off Self-timer: On or Off

The time limit is 8 seconds.

Multishot: On or Off

Three pictures can be taken at the same time.

Memory card Default name: modify the default

name of the photo

Frequency: 50HZ or 60HZ Full screen preview: On or Off

Camera 32

Page 34

to Send the picture via Bluetooth or via MMS, or

Options to carry out the following operations:

Options Description

Delete Delete the current picture.

Modify

Rename Change the name of the picture.

Capture Return to the viewfinder screen to

Set as contact picture

Set as wallpaper

Set as screen saver

Details View detailed information of the

Modify or edit the selected picture.

take a new picture.

Link the picture to a contact in your mobile phone so that the picture will be displayed when the contact calls you.

Available for picture resolution of 176*220 only.

Set the picture as a wallpaper in idle screen.

Set the picture as a screen saver.

picture.

When there is not enough memory space, you will not be able to save the picture and you will be prompted with a warning message. You have to delete existing pictures before you can store new ones.

Video recorder

This option allows you to record short videos. You can play the video, store it in your phone or in the memory card. You can also send the video to your friends via MMS or Bluetooth.

How to ...

Launch Video recorder

Adjust brightness

Press

to enter the main menu

in idle mode and select Camera. Then switch to video mode.

+/-

Press

Brightness level is -3 to +3. Default level is 0.

33 Camera

Page 35

Record a video

Exit from Video mode and return to idle mode

Video option menu

When the video mode is activated and before you start recording, you can change a number of settings by pressing

Options Description

Video quality Select video quality: Fine or

View video

key once. Press again to

Press stop recording.

The video will be automatically saved and stored in My Files > Videos.

Press

)

key or R Back twice.

Options.

Normal.

The last selected value will remain active until you change it again.

Enter My Files > Videos to view the recorded videos.

DV mode Color effect: Off (default), B & W,

Sepia, Blue, or Red

The selected color efffect will be displayed on the screen.

Video format: MPEG-4 or H263 FPS: 5, 10 or 15 frame per

second.

Advanced Storage location: Phone memory or

Memory card. Default name: modify the default

name of the video

Mute: On or Off

If you select On, sound will not be recorded.

Camera 34

Page 36

Video length: MMS (default) or Unlimited.

If you select MMS, the size of the recorded video will be smaller than the currently specified maximum MMS size. Recording will stop when reaching the maximum MMS size and the video will be stored automatically. If you select Unlimited, there will be no restrictions on the size of the recorded video. The maximum size shall be determined by the memory capacity of your mobile phone or the memory card.

Video Playback

Once you have activated the video mode, simply press

to start recording. Press again to stop

recording. The video is automatically saved and the last recorded scene is displayed on the screen. You can press

Play/Pause to play the recorded video

or pause the playback, or press out the following operations:

Options Description

Send Send the recorded video:

Via Bluetooth and Via MMS.

Delete Delete the recorded video.

Record new Return to video mode to record a

new video clip.

Details View detailed information of the

recorded video.

When there is not enough memory space, you will not be able to save the recorded video and you will be prompted wtih a warning message.

Options to carry

35 Camera

Page 37

8. Messages

Create message

SMS

SMS enables you to send text messages to the other party, which is a convenient and affordable mode of communication. You can use the SMS menu to send messages to another handphone or a device that is capable of receiving SMS. Your phone can store up to 1000 messages. Once you have reached 1000 messages, the screen will flash an icon to alert you. You need to delete some messages in order to receive new ones.

Create, edit and send SMS

You need to enter the correct message centre number before you can send SMS. The number can be obtained from your network operator.

1. In idle mode, press

2. Select

Messages > Create Message > SMS

press

. The SMS editing screen will appear.

to enter the main menu.

and

3. Enter the SMS content in the SMS editor and

Clear text

Save as Save as draft

Exit editor

Spell word

Help

If your SMS is not sent successfully, you can resend it. If your SMS cannot be sent successfully after several attempts, please check if your SMS centre number has been set correctly.

When editing SMS, for certain reasons (such as an incoming call, out of battery), you are forced to exit from the SMS editing screen before you managed to send or save your message successfully, the edited message will be saved automatically. The next time you enter the

press operations:

Options

to carry out the following

Delete the text on the editing screen.

Save as template

template.

Exit from the SMS editor.

Select Chinese pinyin input method.

Displays the shortcuts for editing.

: save the SMS as draft.

: save the SMS as

Messages 36

Page 38

SMS editor, the message will be displayed on the screen.

MMS (network dependent)

Your phone allows you to send and receive multimedia messages, known as MMS, which features texts, pictures, sound and video clips. MMS can comprise one or several slides. Whether you send it to an e-mail address or to another mobile phone, the MMS will be played as a slide show. Your phone can support 50 MMS (maximum 100KB). When the maximum of 50 MMS is reached, the screen will display a MMS icon to alert you. You will need to delete some old MMS in order to receive new ones.

Before you can send MMS, you need to enter the correct MMS Center number and ensure that the network profile of your MMS has been correctly configured. You can obtain such information from your network operator.

Create, edit and send MMS

1. In idle mode, press , to enter the main menu.

2. Select

Messages > Create Message > MMS

press

. The MMS editing screen will appear.

and

3. Enter the MMS content in the MMS editor and press

. Then press

the following operations:

Continue

Insert object

Change object

Remove object

Enter details for the MMS:

To: Select

number of the recipient, you can select it from Contacts or Groups list.

Subject: Enter a subject for the

message.

Cc: Send a courtesy copy to other

recipients.

Bcc: Send a blind courtesy copy to

other recipients.

Insert picture, video, melody, page or object.

Only a picture, a melody and a video can be inserted on one page. If 3 of them exist at the same time, only one can be saved.

It appears after you have inserted objects. You can change these inserted objects.

Delete inserted objects.

Options

to carry out

Add to enter the phone

37 Messages

Page 39

Edit subject

Exit editor

Spell word

Help

Preview

Page timing

Save as Save as draft

Exit editor

Spell word

Help

When there is more than one page, you can press </

to view the different pages of the MMS. At the same time, the title bar at the top of the screen will display the current page you are viewing and the total number of pages in your MMS.

Edit the subject of the MMS

Exit from the MMS editor.

Select Chinese pinyin input method.

Displays the shortcuts for editing.

Preview the current MMS.

Set play time of the MMS slides. The default value is 30 seconds.

Save as template

template.

Exit from the MMS editor.

Select Chinese pinyin input method.

Displays the shortcuts for editing.

: save the MMS as draft.

: save the MMS as

4. Press

Contacts

Groups

Phone number

Recently list

Email address

Inbox

The Inbox stores the messages you have received.

1. In idle mode, press

2. Select

3. If there are messages in the Inbox, they will be

4. Press

Send

to access the next option menu:

Select the contact from the Contacts list.

Select the group from the Groups list.

Enter the phone number of the recipient.

Select from the list of recipients you received the messages from.

Enter the email address of the recipient.

Messages > Inbox

listed on the screen in the order they were received (the most recent message will appear at the top of the list).

+/-

is selected, its contents will be displayed on the screen. Press

to select a message. When a message

to enter the main menu.

and press

View to view the selected

Messages 38

Page 40

messages or press following operations:

Forward

Delete

Add to blacklist

Archive to SIM

Move to my favour ites

Options to carry out the

The sender's number will be used as the destination number automatically and the message editor will be activated. Enter your reply and send the message.

When you select contents of the selected message will appear in the message editor. You may edit the message before sending.

Delete the message from the

Inbox.

When you add the contact to the blacklist, you will not receive call/ message from this contact anymore.

Move the selected message from phone memory to SIM card.

Move the selected message to

Favo ur ites

Forward

, the

Details

Dial

Smart Search

5. Press message details will be displayed. Press the message by SMS or MMS or press

Options

Forward

Delete

Archive to SIM

Move to my favour ites

View information of the message such as date, time and sender.

Extract the sender's number from the message and dial the number.

Search the messages by sender's name, number or time.

to enter the next screen whereby the

to carry out the following operations:

When you select contents of the selected message will appear in the message editor. You may edit the message before sending.

Delete the message from the

Inbox.

Move the selected message from phone memory to SIM card.

Move the selected message to

Favo ur ites

Forward

, the

39 Messages

Page 41

Sent

Extract numbers

Add to blacklist

Move to spam box

Details

Dial

Opens the list of numbers available in the message. In this list, the

option opens a pop-up

window showing the following options:

• Save

• Update existing

• Dial

• Send message When you add the contact to the

blacklist, you will not receive call/ message from this contact anymore.

Move the selected message to

spam box

View information of the message such as date, time and sender.

Extract the sender's number from the message and dial the number.

Sent

The

Sent

box allows you to save the messages you

have sent successfully.

1. In idle mode, press

2. Select

Messages > Sent

to enter the main menu.

and press ,.

3. If there are messages in the

be listed on the screen.

4. Press

+/-

selected, its contents will be displayed on the screen. Press mesage, or press following operations:

Forward

Delete

Details

Select multiple

to select a message. When a message is

View

L Options

When you select contents of the selected message will appear on the message editor. You may edit the message before sending.

Delete the message from the box.

View information of the message such as date and time.

You can select several messages one by one or all at once. You can press

to select/cancel the operations on

multiple messages. Checkboxes will be marked on the left of the selected message. Press the selected messages.

box, they will

to view the selected

to carry out the

Forward

, the

Sent

Options to delete

Messages 40

Page 42

5. Press , to enter the next screen whereby the message details will be displayed. Press

Forward to forward the selected mesage, or

press

L Options

operations.

Forward

Delete

Move to my favour ites

Details

to carry out the following

When you select contents of the selected message will appear on the message editor. You may edit the message before sending.

Delete the message from the Outbox.

Move the selected message to

Favo ur ites

View information of the message such as date and time.

Forward

, the

Outbox

The

Outbox

have not sent successfully.

1. In idle mode, press

2. Select

3. If there are messages in the

4. Press

allows you to save the messages you

Messages > Outbox

listed on the screen.

+/-

to select a message. When a message is

selected, its contents will be displayed on the screen. Press

to enter the main menu.

and press

Outbox

View

to view the selected

, they will be

mesage, or press following operations:

Forward

Delete

Details

5. Press

Forward

Delete

Details

to enter the next screen whereby the message details will be displayed. Press to edit the selected message or press

Options

to carry out the following operations.

L Options

When you select contents of the selected message will appear on the message editor. You may edit the message before sending.

Delete the message from the box.

View information of the message such as date and time.

When you select contents of the selected message will appear on the message editor. You may edit the message before sending.

Delete the message from the Outbox.

View information of the message such as date and time.

to carry out the

Forward

, the

Sent

Edit

, the

41 Messages

Page 43

Drafts

List the messages that were created and saved but were not sent, and messages that were automatically saved before you were able to save or send them when you exit from the message editor. Select a message from the Draft box and press

Options

to:

View

, Send,

multiple. If you select

Edit, Delete

procedures would be similar to the Inbox operations.

, Details, Select

View

, the subsequent

My favourites

This menu contains all the messages received and saved in the phone memory via Move to my favourite option.

1. In idle mode, press

2. Select Messages > My favourites and press

3. If there are messages in My favourites, they will be listed on the screen.

4. Press

+/-

to select a message. When a message is selected, its content will be displayed on the screen. Press

to enter the main menu.

View

to view the selected

messages or press following operations:

Details

Forward

Delete

Restore location

Dial

Options to carry out the

View information of the message such as date, time and sender.

The sender's number will be used as the destination number automatically and the message editor will be activated. Enter your reply and send the message.

When you select contents of the selected message will appear in the message editor. You may edit the message before sending.

Delete the message from My

Favourites.

Move the message to the original location where the message is sent or received.

Extract the sender's number from the message and dial the number.

Forward

, the

Messages 42

Page 44

Select multiple

5. Press , to enter the next screen whereby the details will be displayed. Press carry out the following operations:

Details

Forward

Delete

You can select several messages one by one or all at once. You can press to select/cancel the operations on multiple messages. Checkboxes will be marked on the left of the selected message. Press the selected messages.

View information of the message such as date, time and sender.

The sender's number will be used as the destination number automatically and the message editor will be activated. Enter your reply and send the message.

When you select contents of the selected message will appear in the message editor. You may edit the message before sending.

Delete the message from My

Favourites.

Options to delete

Options to

Forward

, the

Restore

location

Dial

Move the message to the original location where the message is sent or received.

Extract the sender's number from the message and dial the number.

Spam box

This menu allows you to filter messages after the firewall has been set. When the firewall is activated, any message from a person on your blacklist will go to the spam SMS box automatically.

SIM archive

In the menu, you can see the read and unread messages saved in the SIM Card. Press view the selected messages or press carry out the following operations:

Options Description

Reply Reply the message.

Forward Forward the message to other

Delete Delete the message.

recipients.

Options to

View

43 Messages

Page 45

email service provider. In some cases, your mobile phone service provider may also provide an e-mail service.

Create e-mail

To write an e-mail, select Email > Create. Enter the address (To ), a copy (Cc), or blind copy (Bcc), Subject and the e-mail Content. When you have finished writing your e-mail, press following:

Save Save the message in the draft box

without sending it.

Send Send the e-mail.

to access the

Inbox

This menu allows you to connect to your mailbox and download the e-mail headers. Press

Receive the e-mails. You may then select an e-mail

header and press options: View, Delete, Reply, Reply all, Forward, Delete

all, Receive.

to access the following

Drafts

The menu lists all the e-mails you have saved but not sent. Press

to: Edit, View, Delete, Delete all.

Add to blacklist

Move to my favour ites

Details View information of the message,

Dial Call the sender of the message.

Select multiple

When you add the contact to the blacklist, you will not receive call/ message from this contact anymore.

Move the selected message to

favour ites

such as date, time and sender, etc.

You can press operations on multiple messages. Checkboxes will be marked on the left of the selected message. You can delete the selected messages.

to select/cancel the

Templates

This menu allows you to select a message saved as a SMS or MMS template. You can create, send, modify and delete your preset messages.

E-mail

Your phone can send and receive e-mail messages, provided this service is included in your subscription. You must already have an e-mail account and have received the settings from your

Messages 44

Page 46

Outbox

The menu lists all the e-mails you have sent. Press

to: Edit, View, Delete, Delete all.

Check mail

The menu allows you to connect to your mailbox and to download the e-mails. This might bring up a message requesting airtime. Select Yes to continue and receive new e-mails.

Settings

This menu allows you to edit e-mail's Account

Settings or Activate one of the available profiles by

pressing

list, press In the editing screen, press to Save and R to Clear. You may edit the following details:

Menu Description

Profile name To name the profile.

E-mail address To enter an e-mail address.

User ID To enter a login name.

Password To enter the password.

. Use up/down key to access the menu

or numeric keypad to edit the content.

to return, press

Number of mails received at a time

Incoming server

Outgoing server

SMTP authentication

Typ e To select POP3 or IMAP.

To define the number of mails received at a time.

To set the POP information used to receive e-mails.

To set the SMTP information used to send e-mails.

To turn on/off the authentication.

Exit

You will be exited from the e-mail menu.

Advanced

Cell Info

This is a network service which allows you to receive text messages of various contents, such as news, traffic, etc. These messages are provided by the network to the subscribers within a certain network area. If this service is available, the network will provide you with the broadcast

45 Messages

Page 47

channel numbers. It gives you access to the options listed below.

Options Description

Reception Select to turn on/off the reception of

Topics Add, change or delete channels.

new cell broadcast messages.

<Add new>: Press

channel.

Change: Edit a channel number. Delete: Delete a channel in the channel

list.

Add to add a new

Memory status

This feature allows you to see how much memory space remains for messages in your phone and SIM card.

SMS timer

You may set a specific time to send an edited text message to a particular contact. This menu allows you to select Add to send text messages at specific times and display such messages in a list on the screen. Select Add to enter into the SMS editing screen. Press

to open the contacts list and select a

contact, or enter the phone number directly and

set message sending options. You can set the date and time to send the message. When you select a message from the list of text messages configured for sending at specific times, you can press message or press following operations:

Delete Delete the message.

Delete all Delete all messages.

When you enter a message detail screen, you can press

directly or press following operations:

Edit You can edit the contents, contact

Delete Delete the message.

View to view the details of the

Options to carry out the

Send to send the message to the recipient

Option to carry out the

or date.

Voice mail

This menu allows you to set your voice mailbox number and listen to voice messages your correspondents have left for you.

You can forward your calls to your voice mailbox (the phone number for callers to leave a message) via the

Call forwarding

feature.

Messages 46

Page 48

Call voice mail

When you receive a voice mail, the phone will send you an alert. You can then call your voice mailbox number to retrieve your voice mail. In idle mode, long press mailbox directly. If the number is empty, you will be prompted to enter the number.

Voice mail number

Generally, you can obtain two sets of numbers from your network provider:

• number for the caller to leave a message (this number can also used for Call Forwarding)

• number for you to retrieve your voice messages

to call your voice

Settings

SMS

Select Messages > Settings > SMS to open the list of SMS accounts. Press settings:

Service center number

This menu allows you to save and edit the SMS service center number of your home network. If the service center number is empty, you will not be able to send any SMS.

Personalize to edit the SMS

Validity period

Allows you to select the duration by which your messages will be stored in the service center. You can select from:

Maximum

This option is useful when your recipient is not connected to the network and is not able to receive your messages immediately.

This feature is subscription dependent.

Delivery report

You can select option allows you to set whether or not to notify you the send status of your messages: successfully sent to the recipient, or not sent successfully.

This feature is subscription dependent.

Signature

You can select (Default is where you can enter your signature. The signature will be added to the end of your message before it is sent to your recipient.

If the SMS is too long after adding the signature, the signature will be ignored.

1 hour, 12 hours, 1 day, 1 week

(default). Press

Off

). If set to On, it opens an editor

+/-

to select a value.

to set this option

Off

and

. This

Off

47 Messages

Page 49

Storage location

You can press storage location of your messages: (Default) or

Change to change the preferred

Mobile phone

SIM

card

MMS

This menu allows you to set your MMS center and personalize your MMS settings. The options include:

Profiles

You can select or edit the parameters.

Sender visibility

You can press It is used to set if your identity will be visible when MMS is sent.

Priority

This option allows you to set the priority level of your MMS. You can set

Delivery report

You can press When set to if the MMS has been delivered to the recipient.

Read report

You can press When set to if the MMS has been read by the recipient.

Change to set this option

Low, Normal

Change to set this option

, a report will be sent to notify you

Change to set this option

, a report will be sent to notify you

(default) or

High

Expiry time

Allows you to select the duration by which your MMS will be stored in the MMS center. You can choose from 6 hours, 12 hours, 1 day, 1 week or

Maximum (default).

Retrieval

Allows you to select Automatic, Deferred, Auto in

home network when downloading of MMS messages.

off

Messages 48

Page 50

9. My files

This menu allows you to store the files in different folders (Pictures, Videos, Sounds, Others) to facilitate more efficient management of files in your phone and the memory card. In addition, you can obtain information regarding your phone and memory card, such as number of files, memory utilised, percentage of memory utilised via the Memory status option.

Pictures

When you enter this menu, the photos which you have taken using the phone's camera as well as pictures you have downloaded via MMS, WAP, BT, or USB will be displayed in a list.

1. Select

2. Press

Options Description

My files > Pictures

menu.

, View/Open

open the selected folder or press carry out the following operations to a selected file:

and press

to view the selected picture/

to enter the

Options

Send

Modify

Advanced Cut

Rename

Details

Use As contact ID

Send the selected file: and

Via MMS

Modify or edit the selected picture.

: Similar to copy, but the original

file will be deleted.

Copy

: Copy the selected file to

another folder.

Modify the name of the selected file.

Display detailed information of the selected photo, such as last modified date, file size, etc.

the phonebook list will be displayed. After you have selected a contact from the phonebook, press to associate the picture to the selected contact.

Only available for picture of 176*220 or smaller.

Via bluetooth

: If you select this option,

L Select

49 My files

Page 51

3. The folder options include:

Rename

Details

Delete

Change view

Sort

Modify the name of the selected folder.

Display detailed information of the selected folder.

Delete the selected folder.

Select List view or Grid view.

Sort the pictures and folders by name or date.

Sounds

When you enter this menu, the sounds which you have stored or downloaded via MMS, WAP, BT, or USB will be displayed in a list.

1. Select

2. Press

My files > Sounds

menu.

, Play/Open

open the selected folder or pres s to carry out the following operations to a selected file:

and press , to enter the

to play the selected audio file/

L Options

Delete

Slide show

Change view

Sort

Select multiple

As wallpaper

176*220 or smaller, it will be displayed as wallpaper in its original size. If it is larger than 176*220, it will be re-sized accordingly.

Delete the selected picture.

If you select this option, the screen will display the full screen view of all the pictures in the form of slideshow every 4 seconds. Press any key to exit from the slide show mode.

You can select to view the pictures in

Sort the pictures and folders by name, date, or size.

Select one by one: select the picture

one by one and then Cut, Copy or

Delete them. Select all: select all the pictures and

then Cut, Copy or Delete them.

: If the selected photo is

List view, Grid view

Full screen

My files 50

Page 52

Send

Advanced Cut

Use

Rename

Details

Delete

Change view

Sort

Select multiple

The available options are:

bluetooth

file will be deleted.

Copy

another folder

You can set the audio file:

ringtone

Modify the name of the selected file.

Display detailed information of the selected audio file, such as last modified date, file size, etc.

Delete the selected audio file.

Select List view or Grid view.

Sort the audios and folders by name or date.

Select one by one: select the audio

files one by one and then Cut, Copy or Delete them.

Select all: select all the audio files

and then Cut, Copy or Delete them.

and

Via MMS

: Similar to copy, but the original

: Copy the selected file to

As Contact ID

3. The folder options and their operations are the

Via

same as Pictures menu.

Videos

When you enter this menu, the videos which you have recorded using the phone's camera as well as videos you have downloaded via MMS, WAP, BT,

or USB will be displayed as a list.

1. Select

2. Press

Options Description

Send

Advanced Cut

Rename

My files > Videos

menu.

, Play/Open

open the selected folder or press to carry out the following operations to a selected file:

Send the selected file: and

file will be deleted.

Copy

another folder.

Modify the name of the selected file.

and press , to enter the

to play the selected video/

Via MMS

: Similar to copy, but the original

: Copy the selected file to

L Options

Via bluetooth

51 My files

Page 53

Details

Delete

Change view

Sort

Select multiple

3. The folder options and their operations are the

same as Pictures menu. Videos are played in the middle of the screen. A status bar is displayed at the top of the screen. The keypad operations when playing videos are as follows:

Key Opera tion

Display detailed information of the selected video, such as last modified date, file size, etc.

Delete the selected video.

You can select to view the video files in

List view, Grid view

Sort the videos and folders by name, date, or size.

Select one by one: select the videos

one by one and then Cut, Copy or

Delete them. Select all: select all the videos and

then Cut, Copy or Delete them.

Start/pause the playback.

Long press to rewind.

)

Long press to fast forward.

Exit/return to an upper menu level.

Return to idle screen.

Others

You can save all other files into this folder. The file and folder options and their operations are the same as the Pictures menu.

Memory status

All memory capacity, used memory capacity and free memory capacity between all memory capacity and used in both the mobile phone and memory card will be displayed.

Settings

The phone has a micro SD memory card slot to increase the phone's memory. The phone supports FAT16 and FAT32 format for 1GB capacity, and supports FAT32 format for 2GB capacity. You can select Uninstall to safely remove memory card from the phone, and select Format to format it. For 2GB capacity, in order to ensure the card can be recognized by the phone, please connect the card to a computer and format it to FAT32 before using it for the first time with X600.

My files 52

Page 54

10. Business

Calendar

This menu displays the calendar. You can select Day view, Week view or Month view. You can create new appointments, view appointments list, delete or modify appointments in the calendar. The calendar stores the alarm date and time of every event. If the current date and time correspond with the date and time of the event, the phone will emit an alarm (if needed), and the screen will display a prompt to indicate that a new event has arrived. You can create a maximum of 30 events. The list will display part of the contents. Once you have selected an event, you can press detailed information.

1. Enter the menu. Press

2. The options include: View Week, New event, Go

to access the options menu.

press

to date, Advanced.

New event

The list of events will be displayed. When you add a new event, you need to enter the corresponding

to view the

to access View or

information of the event, such as subject, location, start date, start time, end date, end time, reminder and repeat method.

If the memory space for events is full, the phone will prompt you that there is no more space.

When editing date and time, the phone will display the default or the selected date and time. You can edit or confirm them directly.

The maximum length of an event is 40 characters.

Reminder

No reminder, On time, 5 min. before, 15 min. before, 1 hour before, 1 day before and other (the reminder

time can be set by you).

Repeat method

The phone provides the following repeat methods:

Once, Daily, Weekly, Monthly and Annually.

When you change the date and time of your phone, the next alert will be repeated based on the modified date and time of the phone.

When you switched off the phone, the organizer alert will be postponed until the next time you

53 Business

Page 55

switch on the phone. For repeated events, only the latest one will be alerted.

Alarm

This phone supports 24-hour alarm. The available options are:

Options Description

Simple alarm

Reccurent alarm

Alarm tone Select an alarm tone.

Snooze Select On or Off.

A simple alarm rings only once. Set the alarm status to On or Off by pressing

you need to specify the alarm time and press

A recurrent alarm rings according to the day you specify in a week. Set the alarm status to On or Off by pressing you need to specify the Time and

Repetition. For example, if you select

Sunday and Monday, the alarm clock will ring every Sunday and Monday. Then press

Change. When set to On,

to confirm.

Change. When set to On,

to confirm.

If you have downloaded your own ring tones and have selected such a ring tone to be the alarm alert, then after you set the alarm and switched off the phone, the alert tone will be changed back to the original factory settings. This does not apply if the ring tone you have chosen is one that comes as default with your phone.

Calculator

Your mobile phone has a built in calculator. Enter the numbers with the keypad.

Options Description

or L

Options > Calculate

Addition

Subtraction

Multiplication

Division

Equals.

To toggle between negative and positive figures.

Business 54

Page 56

Options

> %

Options

> Modular

The maximum length of the numbers and the result is 8 digits. The result of the calculator is indicative.

Voice recorder

This menu allows you to record a voice memo. From the main menu, select Business > Voice

recorder. Then you can press size and select the Storage location. When you set

the MMS size On, the recording will stop if it exceeds the MMS size limit. To start recording, press process, the recorded time will be displayed in real time. To stop recording, press saved in My files > Sounds. Then you could press to play the recorded file or press L Options to access the following options:

Options Description

Add a percentage symbol.

Calculate a remainders of a division.

Add a decimal point.

to set the MMS

Record. During the

and the file will be

New episode

Delete Delete the selected file.

Send Send the selected file.

Rename Change the name of the selected

Make another recording.

file.

Secretary OTG

This menu allows you to make long recordings. From the main menu, select Business > Secretary

OTG.

To start recording, press the list. If there are existing files on the list, press

Options and select New sound. During the

process, the recorded time will be displayed in real time. To stop recording, press saved. Then you can edit the start date, start time, and reminders for this recording. Other available options are:

Options Description

New sound Make another recording.

Delete Delete the selected file.

Add if there is no file on

and the file will be

55 Business

Page 57

Send Send the selected file.

Rename Change the name of the selected

Edit Edit the start date, start time and

Details View the detailed information of the

file.

reminders of the selected.

selected file.

Stopwatch

Your phone features a stop watch and the minimum unit is 0.1 second. The starting time is 00:00.0, in the format “mm:ss.n”, where mm stands for minutes of the watch, which can be any number from 0 to 59; ss stands for seconds, a number between 0 and 59; n stands for 0.x second, x being any number from 0 to 9. The stopwatch will start the timing when you press

Start or

press

timing, press

Pause, to resume L Go, to stop the

. You can pause the timing,

Stop.

Countdown

This feature is very simliar to the alarm clock, except that you will be alerted of the remaining

time, and the phone will emit an alarm at the end of the count-down. The alarm tone is the same as your alarm clock. The minimum time is 1 minute. The format of the time is hh:mm:ss, and the maximum time input is 23 hours 59 minutes 59 seconds. You can edit the time timer and start the countdown by pressing press

Pause, to reset, press

can exit the menu by pressing the

The count-down timer will switch on automatically and emit an alarm at the end of the count-down even if your phone is in idle mode.

Go. To stop countdown,

Reset. and you

Back.

Unit converter

This application allows you to convert many types of units such as exchange rate, area, energy, mass, power, pressure, temperature and volume. Select the type of unit and input the figure and then press

Change to calculate the result.

Press

key to enter the decimal point.

Business 56

Page 58

+/-

Firewall

This function provides a simple and quick method for you to avoid nuisance calls and SMS. Blacklist contains a list of phone numbers from which you do not wish to receive calls or SMS. Select Business > Firewall > Enable and choose between the following options:

•SMS

• Incoming call

•SMS and incoming call

•Off To add phone numbers into the black list, select

Black list, press

can carry out the following operations:

Option Operation

New number

Contacts

Add or OK on Add new, then you

Open the phone number editor, enter the new number and save the number into the black list.

Open the phonebook list and select a phone number for saving into the black list.

You can press the black list, then press following operations:

Change

Delete

Chinese festival (if available)

The menu allows you to view the Chinese festival for the entire year.

Task

This menu allows you to create, store and manage events in your task list.

Create task

This menu allows you to create a new task. There are 2 types of tasks: Phone Call and Task. Select New

task and press

options:

Call/Task Allow you to create a Phone Call

Subject Create a subject for your task.

to select a particular number in

Options to carry out the

Open the phone number editor, to edit the selected number in the black list.

Delete the selected number in the black list.

Select to access the following

or Task.

57 Business

Page 59

Call number (Available only in Phone call)

Display on idle

Set Reminder Set On or Off to choose whether

After you have finished editing, press , to Save your new task.

Enter the phone number directly, or press

• Contacts: Display the list of

• Enter number: Enter the

Set On or Off to choose whether the event will display on screen in idle mode.

you want to receive the alert. When set to On, you need to set the alert date and time. Press confirm.

Select for:

contacts for calling.

number.

Call) or press

options:

Mark as (Not) Done

Edit Edit the selected task.

Delete Delete the selected task.

Delete all Delete all tasks on the list.

Lunar calendar (if available)

You can set this menu On or Off . When set to On, the Lunar calender will display on screen in idle mode.

Option to access the following

Mark a tick on the task as done or untick for not done.

Manage task

Th is m enu al lows y ou to m anage your t asks . Sele ct a task, then press contact (depending on the if it is the Task or Phone

to View the task or Call the

Business 58

Page 60

11. Contacts

Your phone features two phonebooks. The SIM phonebook is located on your SIM card and the number of entries you can store depends on the SIM card. The second phonebook (Smart phonebook) is integrated in the phone memory and the maximum number of name cards you can store is 2000 (a namecard can consist of a name, 4 phone numbers, groups, email address, address, etc.). The SIM card is the default phonebook, but the entries in the two phonebooks are combined, sorted and displayed as a list. When you add a new contact to your phonebook, the new contact will only be added to the phonebook you have selected.

You can store up to 2000 name cards, provided other features in the phone such as Calendar, Sounds, Pictures, and Videos, etc. did not use up a large amount of the phone's memory space.

New contacts

To create a new SIM/phone contact:

Enter new contact Press , and select New

Enter contact details

Store the new contact

To create a contact, you must enter at least a phone number.

Most of the fields are free-text, which means you can enter alphanumeric data using the text entry functions of your mobile phone (for more

Contacts

Enter the following for SIM card contacts.

•Name

• Number

Enter the following for onboard phonebook contacts:

•Name

• General

• Mobile

•Home

•Work and etc

Press

Save.

59 Contacts

Page 61

information on text entry, see “Text and number entry” on page 17).

View contacts

In the phonebook, you can display the details of a contact by selecting it. Then press the details of the selected contact or press

Options to carry out the following operations:

Options Description

New contact

Send message

Call Call the contact.

Edit before call

Call handsfree

Delete Delete the contact.

Add to blacklist

Create a new contact.

Send a SMS or MMS to the contact.

Change the contact’s information before calling the contact.

Call the contact by handsfree mode.

Add the contact into the blacklist.

View to view

Send Contact

Copy to phone

Move to phone

Select multiple

Send the selected record: via SMS or

via Bluetooth.

Copy the SIM entry to phone.

Similar to copy, but the source record will be deleted after copy.

Select one contact at a time or select all contacts.

View group

The View group feature allows you to organize your contacts so that you can send messages to all the members of the group. From the Contacts menu, select View group and the list of groups is displayed.

View

Select a group and members or press following group options:

Options Description

Rename Rename the group.

Send message Send an SMS or MMS to

Viewoto display the group

Options to access the

members of a group.

Contacts 60

Page 62

Reset Restore group to default

settings.

Special numbers

This menu allows you to keep a list of useful numbers such as your own numbers, service numbers, voicemail and SOS numbers.

Options Description

My number View, edit or clear your own

phone number.

Emergency Display emergency phone

number.

Voice mail Dial the number for your

voice mail service provider.

Service numbers This entry of the SIM

phonebook allow you to select one of the available services provided by your operator and to copy it into the selected phonebook.

Advanced

This menu provides you with advanced features so that you can view and edit your contacts:

Options Description

Choose contact list

Copy contact Copy to SIM: Copy all the

Move contact Move to SIM: Move all the

Delete all contacts Delete all contacts.

•Default contact list: Switch contact list between SIM, Phone or

All.

• Default contact location: Select the new contact entry saved on the SIM or phone memory.

entries to SIM.

Copy to phone: Copy all the

entries to Phone.

entries to SIM.

Move to phone: Move all the

entries to Phone.

61 Contacts

Page 63

12. Profiles

Your mobile phone has been preconfigured with the following modes:

•Personal (default) • Car • Flight

• Home • Meeting • Outdoors

• Silent

You can activate and modify all the modes, except

Flight mode and Silent mode. These 2 modes can

only be activated and viewed. The profiles and their respective parameters are as follows:

Personal Ring volume

Ringtones

Alert type

Key sound

Backlight level

Level 9

Default

Vibrate and ring

Level 3

Car Ring volume

Ringtones

Alert type

Key sound

Backlight level

Flight Ring volume

Alert type

Key sound

Backlight level

Home Ring volume

Ringtones

Alert type

Key sound

Backlight level

Level 8

Default

Vibrate and ring

High

Level 4

No volume

None

Off

Level 3

Level 4

Default

Vibrate and ring

Level 3

62 Profiles

Page 64

Meeting Ring volume

Ringtones

Alert type

Key sound

Backlight level

Outdoors Ring volume

Ringtones

Alert type

Key sound

Backlight level

Silent Ring volume

Alert type

Key sound

Backlight level

Silence

Default

Vibrate

Level 4

Level 9

Default

Vibrate and ring

High

Maximum

Silence

None

Off

Level 2

Profile selection

To select a different profile:

Go to Profiles menu

Select the desired profile.

Enter the

Options menu

Press , to enter the main menu from idle mode and select

Profiles.

Press + or -.

Press L Options. You may select:

• Activate: To activate the profile.

• Personalize: To modify the setting in the profile.

Personalize settings

The available options include:

Options Description

Ring volume Select from 9 volume levels.

Ringtones Select the ringtone for Calls,

Alert type Select an alert type: Ring only,

Alarm, Calendar, Messages or Cell info.

Vibrate only, Vibrate and ring, Vibrate then ring or Silent.

Profiles 63

Page 65

Key sound Set the key sound On or Off.

Backlight level Select a backlight level from

level 1 to level 4.

64 Profiles

Page 66

13. Connectivity

This menu provides you with more features to set up a connection with these external devices.

Bluetooth

Your phone supports Bluetooth wireless technology, allowing connection to a compatible Bluetooth device. To ensure interoperability between other Bluetooth devices, please check with the manufacturers of other devices. The Bluetooth connection can be subjected to interference from obstructions such as walls or other electronic devices. To use Bluetooth connection, the device with which you want to establish a connection must support Bluetooth function. Please contact the device's manufacturer or its accompanied documentation.

Establish a Bluetooth connection

To activate, press , to enter the main menu from idle mode and then select Connectivity > Bluetooth. On the Bluetooth screen, select Activate. Next, select Search for devices. When the list of devices

appears, press establish a connection with.

If you do not intend to use the Bluetooth feature for some time, you should deactivate it in order to conserve battery power.

Bluetooth menu

Options Description

Activate Turn Bluetooth feature on or off.

Search for devices

My devices Display the bluetooth devices that

to select the device you wish to

Search for the external devices that you can connect to.

you can connect to. You can select the desired device by

pressing can also open the Options menu of the device. The options are:

Connect/Disconnect (if applicable) Browse files (if applicable) Activate/Deactivate stereo (if applicable) Rename Delete

in the devices list. You

Connectivity 65

Page 67

Settings Select to display more features:

• My name: edit the name of the device

• Visibility: choose to show or hide the device by select toggle On or

Off

• My Profiles: lists the phone’s available profiles

When searching for a device, you are presented with a list of any devices discovered within the range of your Bluetooth-enabled phone. As soon as you select a device and a connection is made, you are prompted to enter a passkey in order to pair with the device. This passkey is supplied by the manufacturer of the other Bluetooth device. Refer to its documentation for further information. The passkey feature ensures that only legitimate connections are allowed to connect either to your device or to the selected device.

via the USB cable, and the size of file transfer is unlimited until your memory is full. Besides, your phone can perform PC connections with the Mobile Phone Tools. From main menu, select Connectivity > USB function > PC Sync, you can connect your phone to the computer via Bluetooth; select USB drive, you can connect your phone to the computer via Bluetooth or USB cable. PC software offers instant sychronization between your phone and your computer, and enables you to backup your mobile phone data and recover the data saved in the computer, receive SMS and edit your mobile phone contacts.

When the transfer is finished, please make sure that you safely remove your device based on the instruction of your computer.

USB function

Connect your phone to a PC via USB cable, your phone will then behave like a USB drive. You can access your phone memory and memory card. You can upload and download music, videos and pictures

66 Connectivity

Page 68

14. Calls

Save to existing

Save the number in the current the contacts list.

Most options described in this chapter are operator and/or subscription dependent and require either a PIN2 code or a phone code. For more information on PIN codes, see “General” on page 71.

View calls

This menu provides you with a list of calls you have missed, answered and made. The calls include All

calls, Missed calls, Answered call, Outgoing calls and Rejected calls, which are displayed in chronological

order with the most recent call at the top of the list. Select a call from one of the lists and press

Dial to call or press L Options to access the

following:

Options Description

View View the detailed information of the

selected call.

Save Save the number if the number is not

in the contacts list.

Send messages

Delete Delete the selected num ber f rom the

Delete Delete all numbers from the list.

Dial Call the selected number.

Add to blacklist

Edit

number before dialing

Call options

This menu allows you to configure the call settings:

Options Description

Send a message to the selected number. You can send by SMS or

MMS.

list.

To add the phone number into the blacklist, see “Firewall” on page 57.

Open the contacts list and edit the number if it is in the contacts list.

67 Calls

Page 69

Auto answer

Any key answer

Minute reminder

Turn Auto answer on/off. When this function is on, the incoming call will be answered automatically after 10 seconds.

Turn Any key answer on/off. When this function is on, you can answer incoming calls by pressing any key, except

), R

Select On or Off to activate or deactivate the minute reminder during a call. The default is Off and the default setting is 45 seconds.

Call services

The available options include:

• Call time: Display the duration of your calls and their charges: Total

incoming calls, Total outgoing calls

and Total calls.

• Call waiting: Select Enable or

Cancel, or check Status.

This feature is network/ subscription dependent.

• Own ID: Select Show ID or Hide ID or Set by network to determine your phone number or identity will be displayed or not to the called party.

• Caller ID: To check your operator setting of showing the identity of your caller.

This feature is network/ subscription dependent.

Calls 68

Page 70

Call forward

• Cost settings: This option is available only when the charge information is included in your SIM card. You can view information of the current call and all recent calls. You need to enter the PIN2 code to manage, maximum cost credit and unit rate.

Set the following call divert options:

All calls, If no reply, If busy.

• When All calls is on, all incoming calls will be diverted to the pre-set number without any reminder.

•When If no reply is on, incoming calls will be diverted if the user does not answer.

•When If busy is on, calls will be diverted if the user is already online or if the call is rejected.

• You can also check the Status of your call diverts or Cancel all call diverts.

Call barring

Restricted dialing

IP number Dial IP prefix of your network

This menu allows you to limit the use of your phone to specific calls by preventing the reception or making of different types of calls. To activate call barring, you need to enter a communication limit code. This PIN2 code will then be sent to the network for validation.

Note that this operation only supports GSM calls.

The types of calls you can bar are as follows:

• All outgoing calls

• All international calls

• Only here & home

• All incoming calls

You can also check the Barring status of your call barring or Cancel barring.

This menu allows you to set the password to prevent the phone from being used by another person.

operator.

69 Calls

Page 71

Clear history

This menu allows you to clear the call history in:

Delete all/Missed calls/Answered calls/Outgoing calls/ Rejected calls. Press

Back to cancel deletion.

Select to c onfi rm d eleti on and

Calls 70

Page 72

15. Settings

You can configure your Xenium X600 mobile phone to best suit your usage preference. You can configure the following settings: General, Display,

Sounds and Connectivity.

Enter the menu

Select a settings menu

General

This menu allows you to configure some general settings:

Options Description

Active flip Press

Press

to enter the main menu

from idle mode and select Settings.

Press

select On, you can answer an incoming call simply by opening the flip.

to set On or Off. When you

Languages Set the display language of the

Time & date

phone.

• Display time: Select On or Off. When you select On, the time information will be displayed in idle screen.

• Set time: Set the time in the format HH:MM.

• Set date: Set the date.

• Time format: Set the time format as 24 hours or 12 hours.

• Date format: Set the date format as YYYY/MM/DD, YYYY.MM.DD,

DD.MM.YYYY, YYYY-MM-DD or DD-MM-YYYY.

• International clock: Go to International clock menu and change

the time zone.

• Power-on time: Set a time for the phone to be switched on. You can select On or Off. When you select

On, you need to enter the time

you want your phone to be switched on.

• Power-off time: same as above.

Settings 71

Page 73

Security

• PIN protection: Select On or Off. When you select On, you need to enter the PIN code when you switch on the phone.

The default PIN code is network dependent on your service provider. Please contact your service operator for the PIN information.

• Change PIN/PIN2: You can modify the password for PIN, PIN2, safeguard and phonelock.

• Safeguard: You can safeguard important information such as messages, contacts on your phone by activating safeguard. You can also change the safeguard password.

• Change safeguard password: You can modify the password for PIN, PIN2, safeguard and phonelock.

The default safeguard and phonelock password is 1234.

Shortcuts Displays a list of shortcut features.

Default storage

Memory status

Mainmenu style

Factory settings

You can set a new shortcut key by establishing a link between a certain feature and a numeric or navigation key. You can also change or delete an existing shortcut key.

Set the default storage location:

Phone memory or Memory card for

different applications.

You can check the memory status of

Contacts, Messaging and My files. You

can also check the memory status of

Memory card if it is inserted.

Select the browse style as List or

Grid.

Restore your phone settings to the default values.

72 Settings

Page 74

Display

You may configure your phone with different display settings:

Options Description

Wallpaper Turn wallpaper display On or Off.

Themes Select from 2 themes.

Backlight level

Backlight duration

Greeting Turn greetings On or Off. When you

Select from 4 backlight levels. You can select the backlight level by pressing confirm.

Select backlight duration from 60

seconds, 30 seconds and 15 seconds.

select On, you can edit the greetings message.

The maximum length of greetings is 20 Chinese words or 50 English characters.

or - keys. Press , to

Sounds

You can set your phone to operate with different sound profiles. For details, see “Sounds” on page 73.

Options Description

Alert type You can select Ring only, Vibrate only,

Ringtones Select the ringtone for Calls,

Ring volume

Key sound Turn key sound On or Off.

Shutter sound

Low battery alert

Vibrate & ring, Vibrate then ring or Silent.

Calendar, Messages, Cell info and Alarm.

Select from 9 volume levels.

Select from 3 shutter sounds. You can also select Off.

Turn warning On or Off.

Settings 73

Page 75

the ring tone you have chosen is one that comes as default with your phone.

Connectivity

Call options

For more information, see “Call options” on page 67.

Message settings

For more information, see “Settings” on page 47.

Network settings

The network name will be displayed on the idle screen. If the phone is not able to identify the network name, it will display the country code and the network code of the unknown network.

Select network

It will vary according to the search mode you have selected. If you select Automatic, the network will be searched automatically. If you select Manual, the search will commence only when you confirm to start searching.

Search mode

You can select Automatic or Manual.

Preferred Networks

Preferred network list is stored in the SIM card. It specifies the priority by which your phone will register to the available network during automatic registration.

1. In idle mode, press

2. Select

3. Press

4. Press

5. You can then press

Settings > Connectivity > Network settings

Preferred networks

, Select

list. The most preferred network will be at the top of the list.

+/-

to select a certain network.

Option and select to Add to end or Delete the

selected network.

to enter the main menu.

to enter the preferred network

to Insert or press

Browser

Various parameters relative to browser can be set under this option, including WAP parameters and Push message.

Connections

GPRS profiles

This menu allows you to configure a GPRS (General Packet Radio Service) connection to the network. The available GPRS settings are:

Options Description

74 Settings

Page 76

Profile name To name the current profile

APN To enter GPRS APN.

Password To enter the password.

Authentication To activate/deactivate the

GPRS info

This feature allows you to monitor the amount of data transferred during GPRS connection.

feature.

Settings 75

Page 77

Icons & Symbols

In idle mode, several icons and symbols can be displayed on the main screen. The status, network and battery icons are displayed all the time. The rest of the icons are displayed if the feature is available, and not displayed if the feature is unavailable.

If the network symbol is not displayed, it implies that the network is currently unavailable. You may be in a bad reception area; moving to a different location may help.

Network - Network icon comprises of 2

portions. The left portion indicates whether or not your phone is already registered with a network, and the right portion indicates signal strength in 5 levels (from no signal to strongest).

Battery - Indicates battery level with 5

battery level indicator bars. When charging, a scrolling icon will be displayed.

International roaming - Displayed when

your phone is registered to a network other than your own.

Whether to log on GPRS - There are 2

GPRS status which are mutually exclusive: GPRS network is available but not in use; or GPRS network is available and in use. The icon will be displayed only when you have logged on to GPRS.

MMS - Indicates there is a MMS

message.

WAP Push message - Indicates there is a

WAP push message. Go to Browser >

Push Inbox to check it.

Voicemail- Indicates voice messages that

have not been heard.

Alarm Clock - Indicates that the alarm

clock is activated.

Vibration - Your phone will vibrate when

there is an incoming call or when the alarm clock rings.

Firewall - Indicates that firewall feature

is activated.

76 Icons & Symbols

Page 78

New event - You have a new event.

Miss call - Indicates there is a miss call.

Call Divert - Indicates that the call

divert function is activated.

Silence - Indicates that silent mode is

activated.

Auto answer - Indicates that Auto

answer is on.

Keypad Locked - Indicates that the

keypad is locked.

Memory card - Indicates the memory

card is in use.

Bluetooth - Feature is activated.

Start recording - Indicates OK to start

video recording.

Stop recording - Indicates OK to stop

video recording.

Icons & Symbols 77

Page 79

Precautions

Radio Waves

Your cellular mobile phone is a low power radio transmitter and receiver. When it is operating, it sends

and receives radio waves. The radio waves carry your voice or data signal to a base station that is connected to the telephone network. The network controls the power at which the phone transmits.

• Your phone transmits/receives radio waves in the

GSM frequency (900 / 1800 / 1900 MHz).

• The GSM network controls transmission power

(0.01 to 2 watts).

• Your phone complies with all relevant safety

standards.

• The CE mark on your phone shows compliancy

with European electromagnetic compatibility (Ref. 89/336/EEC) and low voltage directives

(Ref. 73/23/EEC). Your cellular mobile phone is your responsibility. To avoid damage to yourself, to others or to the phone itself, read and follow all the safety instructions and make them known to anyone

borrowing your phone.Furthermore to prevent unauthorized use of your phone:

Keep your phone in a safe place and keep it out of small children's reach. Avoid writing down your PIN code. Try

to remember it instead. Switch off the phone and remove the battery if you are going to leave it unused for a long time. Change your PIN code after purchasing the phone and to activate call restriction options.

The design of your phone complies with

all applicable laws and regulations.

However your phone may cause

interference with other electronic devices. Consequently you should follow all local recommendations and regulations when using your cellular phone both at home and when away.

Regulations on the use of cellular phones in vehicles and aircraft are particularly stringent.

Public concern has been focused for some time on the possible health risks for users of cellular phones. The current research on radio wave technology, including the GSM technology, has been reviewed and safety standards have been drawn up to ensure protection from exposure to radio wave energy.

78 Precautions

Page 80

Your cellular telephone complies with all applicable safety standards and the Radio

Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC.

Always switch off your phone

Inadequately protected or sensitive electronic equipment may be affected by radio energy. This

interference can lead to accidents.

Before boarding an aircraft and/or when packing the phone in your luggage: the use

of mobile phones in an aircraft may be dangerous for the operation of the aircraft, disrupt the mobile phones network and may be illegal.

In hospitals, clinics, other health care

centres and anywhere else where you may

be in the close vicinity of medical

equipment.

In areas with a potentially explosive

atmosphere (e.g. petrol stations and

also areas where the air contains dust

particles, such as metal powders). In a vehicle transporting flammable products (even if the vehicle is parked) or a vehicle powered by

liquefied petroleum gas (LPG), check first that the vehicle complies with the applicable safety rules. In areas where you are requested to turn off radio transmitting devices, such as quarries or other areas where blasting operations are in progress.

Check with the vehicle manufacturer that electronic equipment used in your vehicle will not be affected by radio

energy.

Pacemakers

If you have a pacemaker:

• Always keep the phone more than 15 cm from your pacemaker when the phone is switched on, in order to avoid potential interference.

• Do not carry the phone in a breast pocket.

• Use the ear opposite to the pacemaker to minimize the potential interference.

• Switch off your phone if you suspect that interference is taking place.

Users of hearing aids

If you are a user of a hearing aid, consult your physician and hearing aid manufacturer to learn whether your particular device is susceptible to cellular phone interference.

Precautions 79

Page 81

Improved performance

In order to improve the performance of your phone, reduce radio energy emission, reduce battery consumption and ensure safe operation adhere to the following guidelines:

For the optimal and satisfactory operation of the phone, you are recommended to use the phone in the normal operating position (when not using in hands-free mode or with a hands-free accessory).

• Do not expose your phone to extreme temperatures.

• Treat the phone with care. Any misuse will void the International Guarantee.

• Do not immerse the phone in any liquid; if your phone is damp, switch it off, remove the battery. and let them dry for 24hrs before using them again.

• To clean the phone, wipe it with a soft cloth.

• Placing and receiving calls consumes the same amount of battery energy. However, the mobile consumes less energy in idle screen when kept in the same place. When in idle screen and while you are moving, your phone consumes energy to transmit updated location information to the network. Setting the backlight for a shorter

period of time as well as avoiding unnecessary navigating in the menus will also help to save the battery's energy for longer phoning and stand-by performances.

Battery information

• Your phone is powered by a rechargeable battery.

•Use specified charger only.

• Do not incinerate.

• Do not deform or open the battery.

• Do not allow metal objects (such as keys in your pocket) to short circuit the battery contacts.

•Avoid exposure to excessive heat (>60°C or 140°F), moisture or caustic environments.

You should only use Philips authentic battery and accessories, as the use of any other accessories may damage your phone and may be dangerous, and will

make all guarantees for your Philips phone null and void. The use of an incorrect type of battery may also cause an explosion. Make sure damaged parts are replaced immediately by a qualified technician and that they are replaced with genuine Philips replacement parts.

80 Precautions

Page 82

Do not use your phone while driving

Speaking on the telephone while driving lowers your concentration, which can be dangerous. Adhere to the following guidelines:

• Give your full attention to driving. Pull off the road and park before using the phone.

• Respect the local regulations in countries where you drive and use your GSM phone.

• If you want to use your phone in a vehicle, install the hands-free car kit which is designed for that purpose.

• Ensure that your phone and car kit do not block any air bags or other security devices fitted in your car.

The use of an alarm system to operate a vehicle's lights or horn to indicate incoming phone calls is prohibited on public roads in some countries. Check local regulations.

EN60950 Norm

In case of hot weather or after a prolonged exposure to the sun (e.g., behind a window or a windscreen), the temperature of your phone's casing might increase, especially when featuring a metallic finish. Be very careful in this case when picking up your

phone and also avoid using it with an ambient temperature over 40°C. For your phone, the socket-outlet shall be installed near the phone and shall be accessible.

Environmental care

Remember to observe the local regulations regarding the disposal of the packaging materials, exhausted batteries

and old phone and please promote recycling. Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.

The labelled packaging material is recyclable.

A financial contribution has been made to the associated national packaging recovery and recycling system.

The plastic material is recyclable (also identifies the type of plastic).

Precautions 81

Page 83

WEEE Marking in the DFU: “Information to the Consumer”

Disposal of your old product

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.

When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC Please inform yourself about the local separate collection system for electrical and electronic products.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

82 Precautions

Page 84

Troubleshooting

The phone does not switch on

Remove/reinstall the battery. Then charge the phone until the battery icon stops scrolling. Unplug from charger and try to switch on the phone.

Your phone doesn’t return to the idle screen

Long press the hangup key or switch off the phone, check that the SIM card and the battery have been installed correctly and switch it on again.

The network symbol is not displayed

The network connection is lost. Either you are in a radio shadow (in a tunnel or between tall buildings) or you are outside the network coverage area. Try from another place, try to reconnect to the network (especially when abroad), check that the antenna is in place if your mobile has an external antenna, or contact your network operator for assistance/ information.

The display doesn’t respond (or the display responds slowly) to key presses

The display responds more slowly at very low temperatures. This is normal and does not affect the operation of the phone. Take the phone to a

warmer place and try again. In other cases, please contact your phone supplier.

Your battery seems to over heat

You might be using a charger that was not intended for use with your phone. Make sure you always use the Philips authentic accessory shipped with your phone.

Your phone doesn’t display the phone numbers of incoming calls

This feature is network and subscription dependent. If the network does not send the caller’s number, the phone will display Call 1 or

Withheld instead. Contact your operator for

detailed information on this subject.

You can’t send text messages

Some networks don’t allow message exchanges with other networks. First check that you entered the number of your SMS centre, or contact your operator for detailed information on this subject.

You have the feeling that you miss some calls

Check your call divert options.

Page 85

The display shows INSERT SIM

Check that the SIM card has been inserted correctly. If the problem remains, your SIM card may be damaged. Contact your operator.

When attempting to use a feature in the menu, the mobile displays NOT ALLOWED

Some features are network dependent. Therefore, they are only available if the network or your subscription supports them. Contact your operator for detailed information on this subject.

Your phone is not charging

If your battery is completely flat, it might take several minutes of pre-charge (up to 10 minutes in some cases) before the charging icon is displayed on the screen.

Page 86

Philips Authentic

Accessories

Some accessories, such as a standard battery and a charger, are included as standard accessories in your mobile phone package. Additional accessories may also be provided or sold separately. Package contents may therefore vary.

To maximize the performance of your Philips phone and not to void the warranty, always purchase Philips Authentic Accessories that are specially designed for use with your phone. Philips Consumer Electronics cannot be held liable for any damages due to use with non authorized accessories.

Charger

Charges your battery in any AC outlet. Small enough to carry in a briefcase/handbag.

Data connect kit

Provides easy data connection to your Philips mobile phone. The USB cable enables high-speed communication between your phone and your computer. The provided software allows you to download pictures and melodies and to synchronize your contacts and appointments.

Deluxe Headset

The integrated answer button offers you a simple way to answer your calls. Simply answer an incoming call by pressing the button or long press to reject the incoming call.

Page 87

Trademark Declaration

Tegic Euro. Pat.

App. 0842463

T9® is a trademark of Tegic Communications Inc.

Bluetooth™ is a trademark owned by telefonaktiebolaget

L M Ericsson, Sweden and licensed to Philips.

PHILIPS and PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. manufactured by Shenzhen Sang Fei Consumer Communications Co., Ltd. under license from Koninklijke Philips Electronics N.V.

Page 88

Specific Absorption Rate Information

International standards

THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy defined by the international standards. These recommendations have been established by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and, the Institute of Electrical and Electronics Engineers (IEEE) that forecast a substantial safety margin for assuring the protection of all persons, regardless of age and health. The exposure recommendations for mobile phones use a measurement unit known as the Specific Absorption Rate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is

2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one gram of tissue by IEEE Std 1528 for the head. Tests for SAR have been conducted using recommended operating positions with the mobile phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR levels of the mobile phone while operating are generally below the maximum SAR value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. While there may be differences between the SAR levels of various phones and at various positions, they all meet the international protection standards for exposure to radio waves. The highest SAR value for this Xenium X600 model phone when tested for compliance against the standard was 0,391 W/kg for ICNIRP recommendation and 0,361 W/kg for IEEE Std 1528. For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to use a headset. The purpose of those precautions is to take the mobile phone away from the head and the body. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used whit an accessory that contains no metal and that positions the handset a minimum of 1.5cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Specific Absorption Rate Information 87

RADIO WAVES

Page 89

Limited warranty

1. What Does This Limited Warranty Cover?

Philips warrants to the original retail purchaser (“Consumer” or “You”) that this Philips cellular product and all accessories originally provided by Philips in the sales package (“Product”) are free from defects in materials, design and workmanship under normal use in accordance with the operating instructions and pursuant to the following terms and conditions. This limited warranty extends only to the Consumer for Products purchased and used in the original country of purchase. The limited warranty is valid only in Philips’ intended country of sales of the product.

2. How Long is The Limited Warranty Period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase of the Product, documented by valid proof of purchase. The limited warranty for original Philips rechargeable battery extends for six (6) months from the date of purchase.

3. What Will Philips Do if The Product is Not Free From Material Defects in Materials and

Workmanship During The Limited Warranty Period?

During the limited warranty period, Philips or its authorized service representative will, at its option either repair or replace, without charge for parts or labour, a materially defective Product with new or refurbished parts or Product and return such repaired or replaced Product to the Consumer in working condition. Philips will retain defective parts, modules or equipment.

Repaired or replaced Product will be covered by this limited warranty for the balance of the original limited warranty period or ninety (90) days from the date of repair or replacement whichever is longer. Repair or replacement of Product, at Philips’ option is your exclusive remedy.

4. What is Not Covered By This Limited Warranty?

This limited warranty does not cover:

a) Product that has been subjected to

misuse, accident, shipping or other physical damage, improper installation, abnormal operation handling, neglect,

Page 90

inundation, fire, water or other liquid intrusion; or

b) Product that has been damaged due to

repair, alteration, or modification by anyone not authorized by Philips; or

c) Product that has reception or operation

problems caused by signal conditions, network reliability or cable or antenna systems; or

d) Product defects or problems caused by

uses with non-Philips products or accessories; or

e) Product which warranty/quality stickers,

product serial number or electronic serial number has been removed, altered or rendered illegible; or

f) Product purchased, used, serviced, or

shipped for repair from outside the original country of purchase, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or

g) Product returned without valid proof of

purchase or which proof of purchase has been altered or is illegible.

h) Normal wear and tear or Force Majeure.

5. How Do You Get Warranty Service?

a) Return the Product to an authorized

service center of Philips. You may contact the local Philips office for the location of the nearest authorized service center.

b) The SIM card must be removed from the

Product before it is given to Philips. Philips assumes no liability for damaged or loss of the SIM card or the data contained therein.

c) If the Product failure is not covered by this

limited warranty, or this limited warranty is inapplicable, void or invalid due to any terms and conditions stated herein, the Consumer will be charged for the cost of repair or replacement of the Product and all other related cost incurred in repairing or replacing the Product.

d) IMPORTANT - you are required to return

the Product together with a valid proof of purchase which must identify the point of purchase, date of purchase, Product model and Product serial number clearly.

6. Other Limitation: This Warranty is The Entire

Agreement.

EXCEPT FOR THE EXPRESS WARRANTIES SET FORTH ABOVE AND THOSE IMPLIED BY LAW AND WHICH CANNOT BE EXCLUDED OR MODIFIED BY

Page 91

AGREEMENT, PHILIPS PROVIDES NO OTHER WARRANTY WHETHER EXPRESS OR IMPLIED (WHETHER BY STATUTE, UNDER THE OPERATION OF LAW OR OTHERWISE) AND SPECIALLY DISCLAIMS ANY WARRANTY OF SATISFACTORY QUALITY MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PHILIPS’ TOTAL LIABILITY FOR DAMAGES RELATING TO OR ARISING OUT OF THE PURCHASE OR USE OF THE PRODUCT, REGARDLESS OF THE TYPE OR CAUSE OF SUCH DAMAGE OR THE FORM OR CHARACTERISATION OF THE CLAIM ASSERTED (E.G. CONTRACT OR TOPIT), SHALL NOT EXCEED THE ORIGINAL PURCHASE PRICE PAID FOR THE PRODUCT.

HOWEVER IN NO EVENT SHALL PHILIPS BE LIABLE FOR ANY PUNITIVE, SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO THE LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERIAL LOSS, LOST PROFITS, LOST BUSINESS OPPORTUNITIES, COST OF SUBSTITUTION OF GOODS OR SERVICES, INVESTMENTS, DAMAGE TO GOODWILL OR REPUTATION, OR LOSS OF DATA AND

CLAIMS BY THIRD PARTIES) RESULTING FROM PURCHASE OR USE OF THE PRODUCT, TO THE FULLEST EXTENT ALLOWED BY LAW, WHETHER OR NOT PHILIPS HAS BEEN ADVISED OF THE POSSIBILTY OF SUCH DAMAGES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.

This limited warranty represents the complete and exclusive agreement between the Consumer and Philips with respect to this cellular Product and it supercedes all prior agreements between the parties, oral or written, and all other communications between the parties relating to the subject matter of this limited warranty. No carrier, retailer, agent, dealer, employee, thereof, or employee of Philips is authorized to make modifications to this limited warranty and you should not rely on any such representation.

This limited warranty does not affect the Consumer’s statutory rights under applicable national laws in force.

Page 92

Declaration of

conformity

We ,

Shenzhen Sang Fei Consumer Communications Co., Ltd. 11 Science and Technology Road, Shenzhen Hi-tech Industrial Park, Nanshan District, Shenzhen 518057 China

declare under our sole responsibility that the product

Xenium X600

Cellular Mobile Radio GSM 900/1800/1900 TAC: 35520202

to which this declaration relates, is in conformity with the following Standards:

SAFETY : EN 60950-1: 2001+A11:2004 HEALTH: EN50360: 2001 EMC: ETSI EN301 489-7 v 1.2.1; ETSI EN 301 489-17 v1.2.1 SPECTRUM: ETSI EN 301 511 v9.0.2; ETSI EN 300 328 v1.6.1

We hereby declare that all essential radio test suites have been carried out and that the above named product is in conformity to all the essential requirements of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10 and detailed in Annex V of Directive 1999/ 5/EC has been followed related to articles 3.1 and 3.2 with the involvement of the following Notified Body: CETECOM ICT Services GmbH, Unterturkhelmer Strabe6-10, 66117, Saarbrucken, Germany. Identification mark: 0682

June 12, 2008

Quality Manager

Sang Fei Consumer Communications CTX600 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1. Getting Started

Inserting the SIM card

Remove the back cover

Remove the battery

Insert the SIM card

Replace the back cover

Replace the battery

Switching on the phone

Charging the battery

Insert a micro SD card

Setting hotkeys

2. Calling

Switch on the phone

Switch off the phone

Make a call

Answer and end a call

Options during a call

Mute or unmute a call

Adjust speaker/earpiece volume

Call recording

Make an international call

Make an emergency call

Make a second call (Network dependent)

Make a Conference Call (Network dependent)

Switch calls (Network dependent)

Call Handsfree

IP Dial

Answer a call

Reject a call

Answer a second call (Network dependent)

Contact Picture

3. Text and number entry

Input method

Entering texts and numbers

Entering symbols

Shift case

Delete

T9® English input

What is it?

How to use it?

Example: How to enter the word "Home"

Basic text input

Pinyin Input

Stroke input

4. Entertainment

Games

Default games

Java

5. Browser

Homepage

Bookmarks

Enter address

History

Settings

Push Inbox

6. Media player

Playlists

Music Player

Trac ks

Artists

Last played

Settings

Now playing

7. Camera

Camera

Camera mode

Video recorder

This option allows you to record short videos. You can play the video, store it in your phone or in the memory card. You can also send the video to your friends via MMS or Bluetooth.

How to ...

8. Messages

Create message

Create, edit and send SMS

MMS (network dependent)

Create, edit and send MMS

Inbox

Sent