Sangean Electronics 025 User Manual

BTS-101

中文

GB

Version 1

1

The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by SANGEAN

ELECTRONICS INC. is under license.

© 2013 CSR plc and its group companies.

The aptX® mark and the aptX logo are trademarks of CSR plc or one of

its group companies and may be registered in one or more jurisdictions.

Control

GB

1

Strap holder

2

Speaker

3

Battery charging indicator

4

Power button

5

Battery status indicator

6

Volume up button

7

Volume down button

8

Bluetooth/Call answer-hangup
button/Play and Pause button

9

Bluetooth status indicator

10

Max volume indicator

11

Microphone

12

Power lock

13

Aux in socket

14

DC In

15

NFC detection tag

2

3

Charging the unit

This unit operates on a built-in Li-on battery that can be recharged
either using the USB charging port or from a USB power adaptor (not
included) with a rated output of DC 5V, 1000mA.

The first time using your BluTab (BTS-101) speaker, connect it to DC
(mains) power and fully charge the battery. When the battery is charging
in progress, battery charging indicator is in solid red. After the battery is
charged fully, the red battery charging indicator will turn off.

Note:
You can begin using the speaker while charging. Please be aware that
in this case make sure the USB power source can provide 5V 1A of
electrical current. If not, it may damage the USB power source.

1. Connect the (supplied) micro USB plug to the micro USB charging
port on the right hand side of the unit.

2. Connect the (supplied) standard USB plug end of the cable to a power
USB port on a computer or other USB charging device. When the
battery is charging, the battery indicator illuminates in steady red light.
If the indicator fades away indicating the battery is fully charged and
the battery charging is stopped.

Power on the speaker

Before power-on the speaker, make sure to set the power lock to its off
position.
There are two ways to power on your speaker.

● You can press and hold the Power button to turn on the speaker.

● In addition, the speaker can be powered on via NFC: Turn on your NFC

feature on your NFC-enabled device > Hold your NFC-enabled device
directly against BluTab’s NFC tag for 2 seconds. Once the speaker is

powered on successfully, the speaker will make a sound to conrm.

Note:

some devices may ask for conrmation from the user.