Sangamo 71111 User Manual

V03

Instruction Manual

GB

Time switch

Connection diagram

1. Safety instructions

2. Initial operation

!

The installation and assembly of electrical equipment must be only

!

!

!



The time switch is delivered in sleep-mode, the display is switched off.

3. Menu overvi ew

4. Symbol legend

Days of the week Monday, Tuesday, ... Sunday;

I

5. Key function

6. Handling advice

7. Channel ON OFF / Permanent P

1. To access the Enter-mode (program, adjustments, options) from the automatic-mode.



The time switch is programmable without external power supply after

Channel ON OFF

status remains until the next manual switching occurs (> 3 sec.).

1. To activate the time switch when operated without power supply.

8. New Progra m (See also the example (9))

9. Example „New Program“ (For a regular switching time)

Step A. to C. please refer to point 9. (Example “Ne w Program”)

end

10. Pulse

11. Program permanent

Program - > New program -> Channel A - > …

Program - > ne w program - > channel A -> perman ent - > …

permanent

12. Additional adjustments

Menu

Main menu

Application

Program query

Program

To query the progra mming steps and re maining memory locations

Copy from one channel to another. Memory of the channel won’t

!

Deletion of swit ching time(s). The pr ogram for all channel s, single
Within Program mo dify each single sw itching time can be
modified.

Date-Time

Adjustment

Adjustment of date and time

Summertime

Adjustment

Adjustment of the daylight saving time mode (ON/OFF)

Language

Adjustment

Choice of languages

Reset to the state of delivery.

!

Displays the hour counter and pulse counter for each channel and

The time switch can be locked with a 4-digit PIN-Code. The co de

Press all front keys for 2 seconds. The time switch is reset. The values for date

- 71111

2. To revert to the beginning of the current (sub-) menu.

1. To adjust the flashing digit.

2. To scroll through a choice

1. Automatic-mode: To switch the channel ON or OFF until the next programming step occurs.

2. Automatic-mode: A push longer than 3 sec. = Permanent switching status (7).

2. To confirm the selection or the entered data.

carried out only by a skilled Person! Otherwise fire danger or danger of
an electric shock exists!

Connect the supply voltage/frequency as stated on the product label!
Warranty void if housing opened by unauthorised person!
The electronic circuit is protected against a wide range of external

influences. Incorrect operating may occur if external influences exceed
certain limits!

Channel is switche d ON

Channel is switche d OFF

For the current da te the “holiday progr am” / “permanent by da te” is activated

Standard prog ramming step

Current state is based on a manual over-ride. The state will be cancelled with the next programming step.

Current state is based on a manual over-ride. The state is permanent until terminated manually (7).

The underscores indicate if the program is active for the days above.

Current state is based on a switching time with pulse function

The time switch is locked; to unlock the device the PIN has to be entered (12).

pressing the -button .
To revert one step or one level back while in the Enter-Mode press .



After completion of a (sub-) menu confirming end will return the device



into the automatic-mode.
With the c hoice changes from end to continue. By confirming



continue the time switch returns to the beginning of the current

(sub-) menu.
When confirming end before completion, the time switch returns to the



automatic-mode without saving the entered data.

Press -button for 1 second.



The current date and time is already programmed and European daylight



savings time is activated.
Select the desired language by pressing -buttons and confirm it by



pressing

. (Remark: By pressing you move one step backwards from
the current position)
If required, date, time and daylight savings time mode can be adjusted also



by pressing

-buttons and a subsequent confirmation with .

By pushing -buttons a manual switch of the channels take

place. The resulting switching status is marked with the hand-

symbol and remains until the next programming step occurs.

(temporary over-ride)

Permanent switchi ng status P

By pressing the corresponding channel button for more than

3 sec. the channel is permanently switched ON or OFF. The

(permanent over-ride)

The pulse function provides you the opportunity of programming a switching time with a defined duration.
As soon as the pu lse-duration has expired the time switch switches OFF automatically (the duration of the pulse is up to 59:59 m m:ss).
The programming is carried out like a standard switching time (see point 8 / 9) with following differences

Choose Pulse function (9 F).



Define the duration of the pulse (pulstime minute / pulstime second).



Program the days of the week



Program the switching time (time hour / time minute)



Validation: Confirm the blinking summary of the pulse program

Program copy

Program delete

Program modify

be overwritten; the copied switching steps appear additionally.

Program

Program

Program

Permanent by date function is not copied!

channels and single programming step s within on channel can be
deleted.

A. If power supply is disconnected press for one second. The display appears in Automatic-Mode.

B. Press

, the time switch is now in the Enter-Mode.

C. Confirm

Program with .

new program with .

D. Confirm

E. Choose the desired channel with

F. For regular switching times choose

G. Within this level you activate the days of the week (1…7) on which the switching time should happen.

you activate “yes” or deactivate “no” the corresponding date. Confirm each day with .

With

H. Adjustment of the time: Hours

I. Verify the entered switching time: If the flashing summary of the programming step is correct, verify

J. If you want to proceed with programming, confirm






. After verification you have the choice between edit/delete and end w ith .

or off w ith

To leave the programming menu confirm

One permanent by date programming step (holiday function) for each channel is possible. During the
desired period (The function is valid for the whole days) the channel can be switched off (

off) or on (permanent on).

The programming of this function is as described in (8 / 9).
The choice permanent will not be offered anymore within the menu new program when already in
use. The switching time can be modified and deleted within

respectively.

delete

and confirm with .

on or off with -buttons and confirm with .

and . Minutes and .

next switching with .

.

Program modify and Program

on

Factory Defaults

Counter

PIN-Code

Reset-Function

Sangamo Limited
Industrial Estate, Port Glasgow,
Renfrewshire, PA14 5XG

Adjustment

Options

Options

and time will be deleted and have to be re-entered. The switching program has
not been deleted!

Date, time and switching program will be lost!

the time switch itself.

can be adjusted, activated and deactivated. If you have forgotten
the Code please call customer service.

Tel: [phone] Fax: [phone]
Email: [e-mail]
Web: www.sangamo.co.uk 71111 Issue A

BA SC0811_173110_pro_N;GB,DK,NO,FIN -22738- 2013.12-