Sangamo Rstat8, Rstat9 Quick Reference Manual

RSTAT8 & 9

Programmable Thermostat

Quick Reference Guide

INSTRUCTIONS: For more detailed information and instructions please refer to
the product User Guide.

_

+

HOLD CLOCK

LIGHT

TEST

COPY

PROG

SET

RESET

Set Time & Date

1. Press CLOCK to enter edit mode

2. Press or to adjust the Year

3. Press CLOCK to cycle to next option (Month)

4. Repeat steps 2 & 3 to set Month, Day, Hours &
Minutes

5. Press SET to save & exit

Review Program

(view which programs are set over 7 days)

1. Press PROG to enter review mode

2. Pressing PROG again cycles through todays
programs (P1-P6 on right of display)

3. Press or to change day (1-7 at top of display)

4. Press SET to exit

_

+

HOLD CLOCK

LIGHT

TEST

COPY

PROG

SET

RESET

Adjust Program

(change programmed times)

1. Hold SET & press PROG to enter edit mode

2. Use or to select day (1-7 at top of display)

3. Press PROG to nd setting (cycles P1 time, P1
temperature, P2 time, P2 temperature, ...)

4. Press or to adjust chosen setting

5. Press PROG to nd next setting you want to
change and repeat step 4

6. Press SET to save & exit

Copy Program

(copy one whole days settings to other days)

1. Hold COPY for 3 seconds (until display shows
‘COPY’)

2. Use or to select day to copy (1-7 at top of

display, number will ash until a day is copied)

3. Press COPY to copy that days settings

4. Use or to select day you wish to copy to

5. Press COPY to conrm

6. Repeat steps 4 & 5 to copy to subsequent days

7. Press SET to save & exit