
INSTRUCTIONS: For more detailed information and instructions please refer to
_
+
HOLD CLOCK
LIGHT
TEST
COPY
PROG
SET
RESET
the product User Guide.
RSTAT8 & 9
Programmable Thermostat
Quick Reference Guide
Set Time & Date
1. Press CLOCK to enter edit mode
2. Press or to adjust the Year
3. Press CLOCK to cycle to next option (Month)
4. Repeat steps 2 & 3 to set Month, Day, Hours &
Minutes
5. Press SET to save & exit
Review Program
(view which programs are set over 7 days)
1. Press PROG to enter review mode
2. Pressing PROG again cycles through todays
programs (P1-P6 on right of display)
3. Press or to change day (1-7 at top of display)
4. Press SET to exit

_
+
HOLD CLOCK
LIGHT
TEST
COPY
PROG
SET
RESET
Adjust Program
(change programmed times)
1. Hold SET & press PROG to enter edit mode
2. Use or to select day (1-7 at top of display)
3. Press PROG to nd setting (cycles P1 time, P1
temperature, P2 time, P2 temperature, ...)
4. Press or to adjust chosen setting
5. Press PROG to nd next setting you want to
change and repeat step 4
6. Press SET to save & exit
Copy Program
(copy one whole days settings to other days)
1. Hold COPY for 3 seconds (until display shows
‘COPY’)
2. Use or to select day to copy (1-7 at top of
display, number will ash until a day is copied)
3. Press COPY to copy that days settings
4. Use or to select day you wish to copy to
5. Press COPY to conrm
6. Repeat steps 4 & 5 to copy to subsequent days
7. Press SET to save & exit

_
+
HOLD CLOCK
LIGHT
TEST
COPY
PROG
SET
RESET
Permanent Hold
(temperature is held indenitely until user cancels)
1. Press HOLD (key icon is displayed)
2. Use or to select temperature to hold at
3. Press PROG to conrm
4. Press SET to save & exit (to cancel press SET
again, key icon disappears)
Hold Days
(temperature is held for a number of days before
returning to the set programs)
1. Press HOLD for 3 seconds (d:01 and suitcase icon
are displayed)
2. Use or to set number of days
3. Press PROG then SET to conrm
4. Use or to set temperature
5. To cancel hold press SET (suitcase disappears)

_
+
HOLD CLOCK
LIGHT
TEST
COPY
PROG
SET
RESET
Hold Hours
(temperature is held for a number of hours before
returning to the programs)
1. Press or to set the temperature
2. Press CLOCK (suitcase is displayed)
3. Use or to set number of hours (between 1-9)
4. Press PROG to conrm
5. Press SET to exit (display changes between time
and XH:00 to countdown time until programs
resume)
6. To cancel hold press SET (suitcase disappears)
Hold Until Next Program
(make a temporary change to the temperature)
1. Press or to set temperature (hand icon is
displayed)
2. press PROG then SET to conrm
3. Press SET to exit (to cancel hold press SET)
If you have a problem or require
any further information please
contact our technical team on:
01475 745131
143781 Issue A
Industrial Estate, Port Glasgow,
Sangamo Limited
Renfrewshire, PA14 5XG
Tel: 01475 745131
Fax: 01475 744567
Email: enquiries@sangamo.co.uk
Web: www.sangamo.co.uk