Page 1
PSPSF247
Powersaver Selectable 7 Day Timer
& Fused Spur
Wiring Diagram:
4
Internal Schematic
LIN
AC:230V
50/60 Hz
SUPPLY
NIN
TIME
SWITCH
BS 1362
FUSE
APPLIANCE
DOUBLE POLE SWITCH
L OUT
NOUT
Load
6.1 Press “SET” to enter program cycle setting, press “-” and/or “+”
to select program from cycle 1 to cycle 3 as below:
Cycle
1(default):
Daily (24 Hour) Cycle, all
the days will flash simultaneously
2: Weekly (5/2 Day) Cycle, the week-
Cycle
days and weekend will take turns to flash.
3: 24/7 (7 Day) Cycle, every day will
Cycle
take turns to flash.
If Cycle 3 is selected each day is
programmed separately. Quick functions
include;
• ON/OFF to move to the next day
Fig. 8
• Boost to copy the previous day settings
The latest ESP product manuals
can be found on-line:
Features:
1
PSPSF247 is a 7 day programmable multi application time switch.
Although primarily used for the control of water heating, the
PSPBF247 can also be used for a multitude of applications
including the control of panel heaters, lighting or combi boilers.
PSPBF247 includes a double pole switch and replaceable fuse for
added protection.
24 hour, 5/2 day & 7 day electronic timer
Up to 10 program operations per day
15 mins, 30 mins, 1 hour , 2 hour, 4hour and 6 hour boost function
Automatic Summer/Winter time change
With changeable fuse
With double pole switch to turn on/off power of the load
Fits directly onto a single gang pattress box
Specifications:
2
Supply: 230V 50/60 Hz
Fused: Supplied with BS1362 13A Fuse
Switch Rating: 13A Resistive (3kW)
750W Incandescent, Halogen lighting
500W Fluorescent lighting
200W LED lighting
100W Compact Fluorescent lighting
Terminals: suitable for max. 2.5 mm² flexible and 4.0 mm²
fixed cabling
Live Parts Protection: This unit is totally protected by the
enclosure
Case Material: ABS
Temperature Rating: T40
Operation Temperature: 0°C to 40°C
Memory Reserve: Permanently reserve setting
Display: LCD
Program Settings: Max 10 On/Off Operations each day
program cycle selected:
1. Daily (24 Hour) Cycle - All days programmed the same
2. Weekly (5/2 Day) Cycle - Mon-Fri are programmed the same.
Sat-Sun have separate set of programs.
3. 24/7 (7 Day) Cycle - Each day is independently programmable
Boost Settings: User selectable - 1/4,1/2,1,2,4 or 6 hours
Accessory Pack: 2x M3.5mm
Please Note: this is a Class 2 Product
Fig. 3 Wiring Diagram
Installation Guide:5
5.1 Flip open front plate from position A
A
P
in
o
n
W
h
re
P
s
e
s
s
r
P
B
N
T
:
ta
s
n
i
la
l
ch
T
o
n
a
5.2 Wire in accordance with the Wiring diagram and Terminal
markings.
Input Voltage:
AC220V-240V 50/60Hz
PSPSF247
230V ~ 13A
Nin
T 40
Nout
Batch code: A30-XXXXXX-01-1
Ground
Fig.5
5.3 Fixing the mounting box on the wall and secure the unit to the
mounting box with the 3.5mm screws provided.
a,b: Fixing Holes
a
C
Mounting Box
b
D
Mounting Box
If
b
tt
n
o
u
o
n
re
e
p
s
s
te
d
f
r
a
s
1
5
c
u
i
e
s
,
n
a
to
r
u
t
to
r
n
m
n
e
s
u
r
o
P
O
R
T
R
O
M
A
G
a
s
s
e
1
)
(
P
r
d
h
n
t
ld
e
h
o
E
T
S
to
b
t
n
u
r
e
o
e
t
t
n
m
n
o
o
ti
rr
e
c
c
d
o
.
e
q
e
S
n
g
ti
S
t
e
:
s
e
i
n
c
e
u
o
D
a
y
,
H
k
W
e
e
u
o
f
M
,
r
P
+
ss
e
t
-
&
r
s
tt
in
ju
a
d
e
t
s
g
s
o
.
S
E
T
ss
e
o
s
t
r
r
c
a
o
h
u
g
th
l
r
o
l
d
v
ie
r
n
p
e
w
a
g
r
o
r
e
(
o
d
r
e
r
F
o
r
d
h
c
g
o
a
a
y
d
a
y
r
o
1
o
u
P
:
p
o
r
r
,
P
n
,
)
o
ff
o
1
P
0
r
e
tu
r
o
n
t
m
n
,
r
o
r
a
y.
is
d
l
a
l
p
e
n
m
ra
g
o
m
p
r
he
in
lo
fo
t
g
,
l
w
g
q
n
i
i
u
n
a
c
ke
s
k
c
y
s
O
B
S
O
o
c
t
p
o
T
ra
g
o
p
y
s
r
m
o
n
in
d
a
t
e
x
t
7
d
(
y
O
O
F
/
F
o
s
t
i
k
N
rt
a
n
o
s
o
t
p
f
t
(
7
a
y
t
d
x
e
c
d
a
y
y
p
h
e
a
m
i
r
g
m
o
r
c
yc
h
e
n
g
l
b
a
e
s
e
n
e
t
a
s
h
2
4
io
n
(
t
o
r,
5
/2
y
d
a
r
.
7
d
)
a
y
e
fe
r
g
e
t
o
t
m
h
e
a
r
ti
o
in
in
u
c
t
r
s
s.
n
t
l
a
d
s
i
p
a
l
y
(
L
th
e
em
t
s
im
t
s
y
e
3
(
P
u
n
te
.
i
(
)
4
m
m
in
s
g
.
ro
f,
f
o
1
P
1
o
.
r
.
0
e
u
b
.
d
e
s
y
a
on
c
le
).
y
y
c
l
e
.
ly
n
o
c
l
)
t
.
2
S
h
rt
)
o
B
p
s
r
e
s
O
to
O
S
T
s
e
le
c
t
m
3
n
1
0
i
,
,
2
o
r
h
h
u
o
,
4
o
u
h
s
r
u
u
h
,
6
o
r
s
e
r
s
c
n
,
a
c
o
ti
n
o
l
p
n
p
g
o
r
e
s
B
s
e
s
r
O
P
)
s
F
F
r
e
O
F
s
s
F
/O
N
a
c
c
o
T
n
e
a
l
.
O
O
S
w
t
o
s
i
T
tc
T
h
B
S
/o
n
G
r
d
a
.
T
M
/
O
N
s
b
d
i
a
t
o
r
o
g
p
le
ra
.
m
B
s
b
O
O
S
T
u
c
n
t
o
a
t
n
ll
i
s
u
t
b
e
e
.
d
s
a
a
g
o
r
e
in
t
p
r
o
m
e
s
u
r
a
.
m
g
s
u
r
r
c
e
t
t
o
r
o
n
m
g
p
,
a
ra
n
y
d
y
o
l
p
s
,
r
e
s
O
B
O
.
S
T
E
te
li
Se
ur
ity
uc
P
c
ro
d
ts
Un
7
ar
ge
Pa
it
T
t
,
rk
,
S
a
ha
b
w
k R
n
,
d
La
id
e
ke
s
,
ed
itc
R
h
d
,
B
98
YN
8
T
le
ph
e
15
7
51
on
:
2
e
0
5
1
50
F
ax
:
15
7
51
2
0
5
1
43
il:
sp
fo
@
E
m
a
in
e
uk
.c
om
b:
w
w
W
e
w
es
uk
om
p
.c
.
Fig.4
Installation must be by a
suitably qualified person in
accordance with the latest
IEE
Lin
wiring Regulations.
Provision must be made in
the
Lout
fixed wiring for a means of
disconnection from the supply
having a contact separation
of at least 3mm on all poles.
This can be provided by the
consumer unit.
D
C
A
T
P
R
O
O
R
A
G
M
(
E
T
S
1
)
P
n
re
d
a
h
o
s
s
b
t
ld
to
u
n
t
t
h
e
e
o
th
n
te
r
c
rr
e
ct
io
m
o
n
e
d
o
.
S
n
g
S
ti
t
e
e
e
e
u
c
q
n
is
:
W
of
D
y
a
e
e
k,
u
r,
o
M
H
in
r
P
ss
-
&
to
d
tt
+
ju
in
a
e
e
.
g
s
s
t s
S
E
T
P
e
r
l
o
s
o
t
r
c
s
s
n
t
h
ro
a
d
r
e
v
g
h
u
l
p
g
ie
ra
o
r
w
m
r
o
in
e
r
F
d
(
o
r
c
d
e
h
a
a
y
o
g
r
ro
d
a
y
:
P
u
1
p
ro
o
P
n
,
P
o
n
,
o
r
1
0
f
o
),
r
n
e
tu
f
r
n
o
l
rm
to
a
d
is
p
la
.
y
W
h
e
n
p
ro
h
a
t
m
in
g
r
m
g
,
lo
o
w
e
l
q
f
c
k
i
n
g
u
i
ke
an
c
s
y
O
S
B
T
O
o
c
t
o
re
p
y
P
s
s
og
s
r
p
a
o
m
in
n
r
t
e
xt
d
ay
7
d
(
O
O
F
F
/
N
e
ss
P
r
t
o
s
t
ip
k
o
n
a
s
rt
d
o
f
t
a
t
e
x
(7
d
ay
c
y
c
y
:
B
N
p
h
e
T
r
g
ra
y
o
c
in
m
g
m
b
s
h
a
e
le
n
e
c
s
a
t
t
e
ta
s
a
n
i
ll
tio
h
5
2
r,
/2
4
n
(
d
7
o
a
y
d
r
).
a
y
c
o
T
h
a
o
t
h
fe
e
t
g
e
n
r
r
in
m
a
t
s
in
e
ct
io
ru
n
.
s
B
f
I
n
u
p
b
o
t
t
r
n
o
e
e
t
s
a
d
e
e
r
5
s
1
f
s
,
a
t
c
n
u
u
s
i
s
r
t
u
n
r
t
o
e
t
o
n
m
r
o
s
i
y
l
p
.
d
a
a
l
2
(
)
s
h
S
t
p
r
o
r
e
t
to
s
3
le
T
O
B
S
c
O
in
e
m
o
s
h
u
0
r
1
,
h
o
4
s
r
u
,
h
2
,
u
u
o
o
6
r
s
r
h
,
a
l
c
s
p
n
o
c
,
e
o
.
n
i
t
L
o
B
p
n
s
g
s
O
e
r
S
s
o
O
t
T
w
a
it
T
S
B
c
h
ys
e
e
T
s
t
o
n
G
/
d
M
r
ti
m
m
e
.
)
(
3
s
e
r
P
s
F
F
O
N
d
/O
t
i
s
o
a
b
a
r
l
e
p
g
r
o
B
S
O
m
.
s
O
u
c
t
o
a
b
t
n
T
u
n
b
ll
s
s
e
i
t
.
d
e
e
r
P
N
/O
O
s
F
F
s
a
g
o
n
i
r
t
a
g
o
r
u
e
e
p
s
m
m
a
r
s
.
T
)
4
(
n
a
e
c
l
a
ut
o
c
e
.
r
r
p
c
t
o
r
e
u
g
n
d
o
m
a
,
r
t
o
,
p
a
ly
r
e
y
n
.
s
s
O
B
S
O
T
m
in
g
s
o
r
P
..
o
ff
,
1
1
.
0
o
r
b
u
e
s
e
d
.
c
a
y
le
y
c
).
o
y
l
n
E
S
te
ec
li
Pr
y
rit
du
s
o
u
ct
,
n
ly
.
le
o
)
ar
ar
ge
k,
P
T
nit
U
t
7
S
an
ha
k
b
w
R
d,
La
es
,
id
k
e
itc
ed
, B
R
h
d
9
8
YN
8
le
ne
ph
o
T
e
:
7
51
15
0
1
5
2
0
5
F
ax
:
7
51
15
2
0
5
1
4
3
il:
E
a
m
@
fo
k.
in
sp
e
u
co
m
w
.e
w
b:
e
W
w
sp
co
k.
m
u
Fig.6
These are only available on pressing SET button to enter timer
setting.These functions are unavailable if the programming is being
edited and ‘—’ is flashing.
NOTE：This programming cycle selection is only offered as
part of the initial product setup or if a Product Reset has been
carried out. Under normal conditions the programming cycle
selection display is not shown.
6.2 Set System Time
Press “SET” button to enter system time
setting.
The year starts to flash, press “-” and/or “+” to
set the year from 00 to 99.
Press “SET” button again, the month starts to
flash, press “-” and/or “+” to set the month
from 1 to 12.
Press “SET” button again, the day starts to
flash, press “-” and/or “+” to set the day from
1 to 31.
Hours
Minutes
Press “SET” button again, the hours display
will flash, press “-” and/or “+” to adjust the
hour from 00 to 23;
Press “SET” button again, the minutes
Fig. 9
display starts to flash, press “-” and/or “+” to
adjust the minutes from 00 to 59.
(Holding down “-” and/or “+” will adjust the data quickly).
Correct the system time: when at normal display interface, press
and hold the SET button to enter the time correction mode.
6.3 After completing system time setting, press “SET” button to
enter timer setting:
Hours
Minutes
ON/OFF
Groups
Fig. 10
Firstly, the LCD will display “--:00” and “01” “ON”, which means it
has entered the timer on time setting for the first group. The default
display “--: 00” means no timer control has been set.
Press “SET” button again , the hours display will flash, press “+” it
will scroll” --，00,01...23”, press “-” it will scroll” --,23...00”;
Press “SET” button again, the minutes display starts to flash, press
“-” and/or “+” to adjust the minutes from 00 to 59.(Holding down “-”
and/or “+” will adjust the data quickly).
Press “SET” button again, the hours will flash, and show 01, OFF,
which means it has entered the timer off time setting for the first
group. Set the timer off timer according to above method of setting
timer on time.
Front View and Back View
3
LED
LCD
BOOST
Double
pole switch
Fig. 1 Front View
(Fig. 1 and Fig. 2)
PSPSF247
230V ~ 13A
Nin
Nout
T 40
Batch code: A30-XXXXXX-01-1
Lin
Lout
Fig. 2 Back View
Insert the M3.5mm screws into A & B
(on the switch) and C&D(on the mounting box)
mounting holes.
:
Operation Guide:
6
For Reset/Initial setting, all LCD segments flashing displays as
below:
6.4 Please complete the timer setting for other groups according to
the above method.
If it is not required to set 10 groups of timer, you can press and hold
the “SET” button to save and exit the initial setting directly.
Fig. 11
Fig. 12
Fig. 7
All groups timer must be in consecutive order, i.e. group 1 must be
PSPSF247 has a double pole switch to turn on/off power to the
loads.
Before setting, put the double pole switch to the ON position, and
then flip down the front panel to show the hidden panel, and
before group 2 & group 2 before group 3. If the wrong order is
programmed, error messages will be displayed . Please press
“SET” again to reset the timer for this group. The already set timer
for other groups will not be affected.
complete the initial setting.
1
Page 2
6.5 Cancel the timer control setting: After completing the
initial/reset setting, if timer control for one of the group needs to be
cancelled, please set the timer on time to “--:00”. When the timer on
time is cancelled, the timer off time is default to be cancelled as
well.
：Programming past midnight is NOT allowed. To
NOTE
overcome this,the program needs to be split in two parts from
midnight as per example-
Desired program period - on 22:00 off 07:00
make Prog 1 - on 00:00 off 07:00
make Prog 2 - on 22:00 off 00:00
6.7 Timer Control Override Function: If during a timer On time
you wish to turn off the load, simply press the BOOST button
once. Press BOOST button again, to enter Boost control. The
load will keep on until the BOOST period is over or the timer on
time of next group is due.
：Using the Timer Control Override Function will not
NOTE
affect the timer control settings & the next time it will function
as normal.
6.8 Off (Holiday) Function: Allows you to suspend timer control
whilst still allowing the Boost function to be used using the OFF/ON
button.
Press once = Suspend timer control(LCD display will include OFF)
Press twice = Cancel(LCD will return to normal display)
NOTE：This is NOT an override function for timer setting.
BOOST button is still active.
6.10 Product Reset (return to default settings):
Switch off power to unit. Hold in BOOST button whilst switching
power back on.
All LCD segments flashing displayed, Load On = Unit Reset
Press BOOST = 1 displayed
Press SET = 2 displayed
Press - = 3 displayed
Press + = 4 displayed
Press OFF/ON = software version displayed
Press SET to reprogram = All LCD segments flashing displayed,
Load Off.
Load Status Indicator Light: There is a load status indicator light on
the front panel. when the load is on, the green load status indicator
light will illuminate; when the load is off, the indicator light will turn
off.
6.6 Boost Function: As well as the programmable cycles, the
PSPSF247 offers 6 options on period duration using the BOOST
button:
Press once = 1/4 hour (The LCD will display 0:15)
Press twice = 1/2 hour (The LCD will display 0:30)
Press three times = 1 hour (The LCD will display 1:00)
Press four times = 2 hour (The LCD will display 2:00)
Press five times = 4 hour (The LCD will display 4:00)
Press six times = 6 hour (The LCD will display 6:00)
Press seven times = Cancel function (The LCD will show 0:00 and
return to normal display) Duration can be extended or cancelled by
successive presses.
Fig. 13
6.9 Keypad Lock: Press - & + together for 5 seconds to lock
settings = display briefly shows L , and then return to normal
display.
Fig. 14
NOTE：BOOST button is still active during keypad lock
mode. Display shows L when other buttons pressed. Press & + together for 5 seconds to unlock settings.
Date Issued
Issue No Description
J20 A30-PSPSF247-01-2 Rev.1
Health & Safety
Health & Safety
Regulations.
proceeding.
proceeding.
be applied to the corresponding models of most manufacturers.
Your product is not user serviceable. Do not dismantle this product.
may be subject to change without prior notice.
may be subject to change without prior notice.
Health & Safety
Health & Safety
This unit must be installed by a suitably qualified person in accordance with the latest IEE Wiring
Regulations.
Regulations.
Isolate mains supply before commencing installation. Please read all installation instructions before
proceeding.
proceeding.
Example circuit diagrams for typical installations are shown. These diagrams are schematic and should
be used as a guide only. Please ensure that all installations comply with the current IEE regulations. For
reasons of space and clarity not every system has been included and the diagrams have been simplified,
for instance some Earth connections have been omitted. Other control components shown in the
diagrams i.e. Valves, Room Stats etc. are general representations only. However, the wiring detail can
be applied to the corresponding models of most manufacturers.
Your product is not user serviceable. Do not dismantle this product.
Due to our policy of continuous product improvement and development, the specifications in this guide
may be subject to change without prior notice.
may be subject to change without prior notice.
Unit 7, Target Park, Shawbank Road,
Elite Security Products
Lakeside, Redditch, B98 8YN
Tel: 01527 515150
Fax: 01527 515143
Email: info@espuk.com
Web: www.espuk.com
2
Loading...