CHOICE - FSTAT1 - Frost Room Thermostat
User Instructions
Bimetallic frost room thermostat designed to give automatic frost protection to boilers and pipework. The thermostat
should be tted in the coldest areas, eg:- loft space, oor voids, garages etc.
Specication
Temperature Control Range: -5 to 25oC
Power Source: 230Vac, 50Hz
Load Rating (1-3): 10A / 250Vac
Ambient Max: T50
Protection Rating: IP20
The Product must be installed by a competent person in line with the latest IEE regulations. Isolate mains before com-
mencing installation.
Wiring
Terminal 1 = Live In
Terminal 2 = Not Used
Terminal 3 = Heater Load
Terminal 4 = Neutral
The thermostat is provided with an accelerating resistance which must be connected in order to obtain the accurate
performance. The terminal 4 has thus to be connected to the neutral.
Base
Dial
Cover
Technical Helpline: 01475 745131
SERVICE AND WARRANTY
Your product is not user serviceable. PLEASE DO NOT TRY TO DISMANTLE THE UNIT. This product is guaranteed by your supplier for 5 years from the Date of Manufacture. If it
should become defective, please contact your installer or supplier for a replacement unit or visit www.sangamo.co.uk/returns.
CUSTOMER CARE POLICY
As part of Sangamo’s continuous improvement program, the Company operates a Customer Care Policy. This means that we welcome your comments and complaints, as it can help
us to improve our services to you, our customer.
Due to our policy of continuous product improvement and development, the specications in this guide may be subject to change without prior notice.
Sangamo Limited, Industrial Estate, Port Glasgow, Renfrewshire PA14 5XG
Email: enquiries@sangamo.co.uk Web: www.sangamo.co.uk
Tel: 01475 745131 Fax: 01475 744567
143726_C
Loading...