Sanful F-900G/S User Manual

GPS/SMS/GPRS
CAR ALARM&TRACKIN G SYSTEM
Made in ChinaHK SANFUL
GPS/SMS/GPRS
CAR ALARM&TRACKING SYSTEM
User Manual
Model: F-900G/S
- 1 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
Catalogue
……………………………………2
Feature & Functions………………………………………3
Operation…………………………………………………..4
……………………………………………..7
nstallation And Wire Diagram…………………………..12
How To Search Your Vehicle Position………………….18
………………………22
- 2 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
GPS/GSM CAR ALARM
&TRACKING SYSTEM
Technical Specification
No. Article Technical Data
1 Position Mode:
GPSWith GPS SiRF-Star III chipset
2 Data Communication
Mode
SMS
3 Frequency Range (MHz) 900/1800 or 850/900/1800/1900MHz 4 Supply voltage 12V DC 5 Supply range 10~24V DC 6 Standby current ≤150mA 7 Static current: ≤ 30mA 8 Peak Current: ≤ 300mA 9 Work Temperature:
-20~70 10 Working humidity: 20% ~ 80% 11 Size of the Mainframe: 14.5×8.5×3.5 CM
How to recode the Transmitter
In disarm status, open the car door, then switch the ignition key between ON & OFF positions for at least 15 times. When the main unit’s LED turns on, the main unit will send out one sound “Bi”, it means that the system is in programming status. In the next 10 seconds, please press the any key on the transmitter, if you can hear “Bi Bi” sounds, it means that the transmitter has been programmed. In the second 10 seconds, you could program the second transmitter with the same process. If there is no any signal from the transmitter in 10 seconds, then the system will automatically quit out programming status, and send out 3 sounds “Bi Bi Bi”
- 3 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
. Feature & Functions
real-time monitoring the vehicles
Noises of damage, etc, after input the password. He/she can
d the car against theft and ask for help without
knowing it.
Alarms will be given to users when the car is dragged or towed
terribly, for example, external shock, collision, drag and
short messages will be sent by the system to the alarming
. Car owner will receive the messages in 5 seconds, and then deal
illegal Door-opening alarming
enerate alarms to the alarming telephone and the
if car doors are opened illegally (No t open by remote control). It will tell
4 Remote control the central control lock.
It can match with the products to achieve alarm activation, alarm
5 brake and lock
–close the door—drive the car, system will
in the first brake if the car doors are not closed
.
6 lock and unlock the door by telephone
phones can be used to open and close the door, set arm and disarm
.
Exactly position the car by SMS or telephone
SMS or calling monitoring center at any time. Then he/she
e position report like that: your car is on XX road, near XX hotel,
meters (work on software). The time
is about 10 seconds between the information sent and received.
- 4 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
8 locate the car by internet.
the car by our car checking system in the internet at anytime. You just
input your user name and your vehicle license number to check the exact
work on software).
Remotely cut off power and gas supply.
situation, you can send SMS to cut off power and gas
Then the car will be stopped and can’t be started..
Emergency button
driver in danger situation, he/she can press the emergency button,
the system will automatically send information to the emergency alarming
phone.
11 Over speed alert
is driving over the preset speed, a report will be generated.
12 Geo-fence
set up zones for the car. When the car is out of these
predefined zones, a report will be generated.
Auto position by interval time. Movement alert setting.
-up battery built inside the device, when the main power be cut owner’s cell phone.
he Monitoring software and electronic maps need extra orders.
. Operation
.1 Remote control
Arm Disarm
Emergency help button Search
- 5 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
Operating
mode
GPS/G
SM
System
Status
Indicator
Status
Vehicles Status
Vehicle owner short No
te/telephone
1. The turn light would flash once, siren sound once.
1. No message in Normal status. If use car owner phone to call the system to arm, the system will call back to car owner, hang up after several sounds. No expense caused
2. If vehicle door didn`t closed well after door lock, the siren and turn light would remind for 17 seconds.
2. The vehicle door is No t closed well.
3. If key in ON position, it can only lock
3.No message
4. After forewarns for 10 seconds, the vehicle vibrates due to external force, the vehicle light would glitter and siren sound.
4. After the vibration alarming, you would receive vibration and position message.
1.Press
Arm key For 0.5 seconds.
2. Use car owner phone to call vehicle GSM SIM card.
3. Use any phone to send Arm message to vehicle GSM SIM card
arm
1.Successf ul arm ,indicat or quickly flash twice in one second
2.If alarmed, the indicator flash slowly once a second
5. Open the door and ignite after forewarn, the vehicle light glitters, and siren sounds
5.show message of door No t closed well, ignition alarming, and vehicle position
1. The vehicle turn light flashes twice, and siren sounds twice.
Pres disarm key on the remote control for
0.5 seconds
2. Use car owner
disarm
1. The indicator won’t light after
2. If No t opening the door to enter the vehicle within 45 seconds after disarm, the system would auto “Arm” (the second
- 6 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
anti-burglary ).Open the door to cancel Arm.
3. If key in ON position(ignition status), it can only unlock
4. If it has already alarmed (except robbery and forcibly disable vehicle), the vehicle turn light would flash twice, siren sounds twice, and door unlock, and alarming cancelled.
123 No message
4. show message of disarm successfully and position.
mobile phone to call vehicle GSM SIM card.
3. Use any mobile phone to send Arm command message to vehicle GSM SIM card instruction to the vehicle
disarm.
2.If there
has been a
alarming, the indicator flash quickly once a second
5If already alarm the robbery alarming or vehicle stops, it is invalid to use remote control to cancel Arm. You need to ask center to cancel.
5. No message
Press emergency help
button ” ” on remote control for 3 seconds
Emerge ncy help( ca n use this function in both Arm or Disarm Status)
The indicator flash quickly 5 times, after alarming, the indicator would slowly flash once a second
The siren sounds quickly 3 times, turn light flash quickly 3 times.
show message of emergency help and position. The system would send a alarming message to car owner and center once per 20 minutes until the alarming is relieved.
- 7 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
Press Search button on the remote for 0.5 seconds
Search the vehicle
The indicator flash once
The vehicle turn light flash 5 times, and siren sounds 5 times.
No message
Press the robbery button of the system for 5 seconds
Robber y alarmin g
The indicator doesn’t light.
The vehicle turn light doesn’t flash, siren doesn’t sound. It is “voiceless alarming”.
No message. The robbery alarming only alarm to designated center. The system would send a alarming message to center once per 20 minutes until the alarming is relieved.
System Setup
. System Setup
Prepare for testing:
1) Prepare a valid GSM SIM card; insert it into the SIM card slot on the main unit. (2) Install the system according to the wiring diagram (3) Setup the system according to the SMS command. (6) User could send out the command via SMS to test the function, include sound monitor, and position the car, change password and so on.
.1 Send the following message to set up system.
10owner mobile phone number*2030center phone
number
(666666 is the initial center code. CEN (in capital) is control command code.
No any space in the message) For example,CEN6666661013566666666203013700000000.It means the owner phone number is 13566666666 and the center number is 13700000000,which the system can identify. Send this message to vehicle SIM card by owner’s mobile phone, there is the same message will be sent back to owner’s mobile phone, it means that set up successfully.
.2., For foreign customers (not in China), please continue to do the next
step.
- 8 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
send the message CEN666666#77:81 to vehicle SIM card.
.1.3 Arm/disarm by car owner’s phone . Arm: call the system SIM card by owner’s phone, Hang up after get through
for several seconds. If the device calls back. It means arm successfully.
. Disarm: call the system SIM card by owner’s phone, Hang up after get
through for several seconds. If there is No call back, means disarm successfully, and the remote control is also in disarm status.
No expense caused
. SMS Control command
can control the vehicles by command
command is: user’s password (111111) + control code (XXX)
111111. must be capital letter.
No space between the user password & the control instruction.
111111PSWnnnnnn
command is for password changing. The length of the user
the first time.
”11111PSW1234” to the system SIM card number, and gets the confirmation SMS 111111PSW1234 in 10 seconds. It means that the user password has been changed to 1234.
111111ARM
rm the system. The system will send back a message of current position of
vehicle.
111111DSM
isarm the system. The system will send back a confirm message of current
position of vehicle.
111111STP
- 9 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
isable vehicle. The system would send back a message of current position of
vehicle.
111111RES
vehicle (Center stop & robbery alarming can be relieved by center only),
The system would send back a message of current position of vehicle.
111111CHK
nquiry car position information.
a SMS, with Arm /Disarm state, LONG, LAT, speed,
direction.
111111MON*
around the car.
is the telephone which is used to monitor the voice. When user send this command to the system, the system will call back the telephone , user could listen in the voice around the car upon picking up the call.
111111ZD*
is 1, the instruction 111111ZD1 is to enable the shock sensor is 5, the instruction 111111ZD5 is to disable the shock sensor
CEN666666#4
button, you need to send this command to disarm the car. For the SOS alarm you can not disarm the car by remote control and 111111DSM command.
Auto position function
- 10 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
CEN666666#51:11
Command:CEN666666#16:X,0
set in 0,there is no SMS be sent back.
CEN666666#16:10,0 there is SMS be sent back every 10(seconds)
Geo-fence function
: 111111FENx(XL:a,YL:b,X:c,Y:d)
111111FENxXL:A,YL:B,X:500,Y:500
deactivate the function of geo-fence, x=1, activate the geo-fence
function
aa is latitude(degree), the range of the value is(0-90)
bb longitude (degree), the range of the value is (0~180) cc is the distance of latitude (Meter) dd is the distance of longitude (Meter)
commands
Check the setting of geo-fence
Deactivate the Geo-fence Activate the geo-fence, using the parameters of the previous
setting
Activate the geo-fence, using the latitude & longitude of present
location, the distance of latitude & longitude are 1000 meters .
only change the distance of latitude, the other parameters
keep the same.
only change the distance of longitude, the other
- 11 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
parameters keep the same.
-fence does not have relation with Arming or Disarming.
I want to activate the fence, if the center’s latitude is 23.1400, longitude is 113.4500, if the fence is a circle with Radius of 500meters, then the SMS instruction is: 111111FEN1(XL:23.1400,YL:
113.4500,X:500,Y:500)
Movement alert
: 111111MOVx
present location.
To check the center’s position
Once the system is disarmed, the movement alert will automatically deactivated.
ctivate it & test the
function
Speed alert
111111SPD:X,
111111SPD:60, if the speed is over 60KM/H, it will send SMS to
warn you)
111111SPD:? ,
ver speed
te:
Use a new GSM SIM card, as all info in this card would be automatically cleared in this alarming system.
- 12 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
Display.
. INSTALLATION And Wire Diagram
antenna chooses the position and is fixed
.1 The GPS antenna installs when should guarantee the receive face on (sky),
also place above does not have the metal to cover, shield
.2 The GPS antenna suggested installs the position
hideaway
nonmetallic material quality)
If the windshield will glue has the thermal insulation layer to reduce the GPS receive signal, will create GPS to work abnormally, this time please will replace the GPS antenna to install the position.
.3 The GPS antenna may adsorb on the metal object, or glues reliably with
sponge force two-sided rubber, please note the GPS antenna not to
.4 The GPS wire hideaway and pulls to the main engine nearby, antenna plug
antenna chooses the position and is fixed
The GSM antenna suggested installs the position
Underneath first gauge board hiding place
Underneath the latter windshield plays the part of under the board Underneath chair hideaway
. sweeps the GSM wire hideaway pulls to the main engine nearby, antenna
Attention: The GSM antenna may not to the GPS antenna juxtaposition, also
entral lock System..
- 13 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
’s damage, the main unit position should be concealed, avoid
-theft
uipment; can use screw or strong
-sided adhesive paste to fix.
In the dashboard before the host seat in the dashboard before the vice-seat in the centre console of the car
suggest that gps terminal will install by the professional people.
- 14 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
- 15 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
- 16 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
- 17 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
ositive electrode trigger
- 18 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
. How To Search Your Vehicle Position
.1 If you haven’t open gprs feature please visit this online
to Search Position.
Http://tracking.sanful.net
For example: if you input inquiry command111111CHK”to SIM card number of your
, you would get a message “System
position:272602B4,A,X+2.29494,Y+48.85800,0.21.S.108.12D”within
Then enter the longitude, latitude you gained to online software, then
“Locate” you will know the position of your vehicle.
- 19 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
Note: If the Longitude and Latitude is "W" or "S" please add "-" before the datas.
6.2 If you want to use gprs feature to tracking your car please go on the following steps.
6.2.1 Send this command to your device 111111WWWIDNstrIPNstrAPNstrCOMstrRPTx For example
111111WWWIDN56895032557079IPN58.218.211.213APN CMNETCOM7020RPT6
Attention: IDNthis is the IMEI number that fill the last 14 numbers;(you can see the IMEI on the device IPNthe server IP APNyour sim card APN Name,User ID,Password COMthe server port RPTSet the GPRS upload time,which 1 means 10s
When you send this command, you will receive the same SMS which means it set success. Please attend this ” ”.
6.2.2 Send this command to your device: 111111LOG:4:1,8:1, 4:b=0,no need check CRC,b=1,need check CRC.
8:b=0, Close GPRS;b=1,Open GPRS
6.2.3 After that please send this command to your device: 111111RUN:5:0, Note:
- 20 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
111111 is your device password, if you have changed, you need
change it to your password.
6.2.4 After you set the gprs feature successful, please you can go to the website to tracker your cars.
Website http://121.37.60.38/webgps Login user name and password please ask your administrator.
6.2.5 After Login the online GPS Tracking System, click ‘switch list’, there’s a vehicles list, you can click ‘locate’ to position the vehicle.
- 21 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
.
.Common Problems and solutions
problems
possible causes
solutions Remote control can not be used
Battery shrapnel rust Clean the rust
Remote control lamp
can not flash
Battery sepatate Check the battery
The remote distance is not enough
Battery no power Change the battery Car door is open Close the door
Door sensor broken Remake
Distort report
Remote control is block the keys
Remake remote
control Indicator flash slowly, can not be relieved
Anti-robbery button be pressed
sms111111RES to
system SIM card
SIM car no money Add money Car owner phone changed
Re-setup
Mobile phone can not recieve the message
Too many short messages
Delete message
Loading...