Sanford L P Dymo LWW Users manual

LabelWriter

Quick Start Guide

®

WirelessWireless

Wireless

Copyright

© 2017 Sanford, L.P. All rights reserved. Revised 6/17.
No part of this document or the software may be reproduced or transmitted in any form or by any means, or translated
into another language without the prior written consent of Sanford, L.P.

Trademarks

DYMO, LabelWriter, and DYMO Label are registered marks in the United States and other countries. All other trademarks
are the property of their respective holders.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

Quick Start Guide

For complete information on using your label printer, download the DYMO LabelWriter User Guide from one of the following locations

 From the User Guide link on the DYMO Label

software Help menu

 Use the QR code at the left
 From support.dymo.com

Register at www.dymo.com/register

Registering your product ensures that you will receive any
news and updates. During the registration process, you will be
asked to enter the serial number for your label printer. The
serial number is located on the bottom of the printer.

Connecting the Power

Plug the power cord into the power adapter and plug the

1

power adapter into the power connector on the back of the
printer.

Plug the other end of the power cord into a power outlet.

2

3

Press on the side of the printer to turn on the power.

Power cord

Serial number on
bottom of label printer

Power adapter

Power

USB

WPSRESET

1

Loading Labels

Lift to open the top cover.

1

Place the label roll on the spindle so that the labels feed

2

from underneath and the left edge of the label roll is firmly
against the side of the spool.

Press the spool guide tightly against the side of the label roll,

3

leaving no gap between the roll and the spool.

Insert the label spool into the slot in the printer with the

4

labels extending from underneath the roll.

Align the left edge of the label with the left edge of the label

5

feed slot and insert the label into the slot.
The printer automatically feeds the label, stopping at the
beginning of the first label.

Slide label guide against labels.

6

IMPORTANT! In order for the labels to feed properly:

 Make sure the power is turned on.
 Insert the label with the left edge against the left edge of the

label feed slot.

 Press the label spool guide flush against the label roll,

leaving no gap.

2

3

4

5

6

2