Page 1
A
MWS481872/MWS361454 WIRE SHELVING
C
D
Screw four pieces of Leveling Foot (E) into
1
the bottom of each Lower Pole (B).
Plastic Clips (D) utilizing the grooves of
each lower pole at the same desired
position making sure arrows of all the
plastic clips pointing up.(
(F) castor set in the step for mobile usage.
Replace (E) with
Snap
)
Ensure the Wire Shelf (A) positioned
2
correctly. Hold the shelf and slide the top of
each Lower Pole (B) through the bottom of
each corner opening of the Shelf until it
reaches Plastic Clip (D) and fits tightly.
Up
Down
Snap plastic clips on the grooves of each
3
lower pole at your desired position for the
next wire shelf. Slide down the wire shelf
from the top of each pole down onto the
plastic clips.
Screw Upper Poles (C) into lower poles
4
using connectors already assembled on the
lower poles.
B
E
No.
name
Parts
QTY
A
Wire Shelf
4 pcs 4 pcs
Lower Pole
B
C
Upper Pole
4 pcs
D
Plastic Clip
2 pcs spare
34 pcs
Leveling Foot
E
4 pcs
Castors Set
F
x2
x2
Repeat Step (3) to install remaining two wire
5 6
shelves.
Push down firmly every wire shelf at corners
using rubber mallet to ensure all the shelves
are in place covering plastic clips evenly at
each corner.Adjust Leveling Feet (E) or
castors
(F) to attain proper leveling if needed.
Low
Tall
Loading...