Instruction Manual
Built in Induction Hob
SINHOBB13 / SINHOBW13
SINHOBB13/W13_IB.indd 1 05/08/2013 12:55
2
SINHOBB13/W13_IB.indd 2 05/08/2013 12:55
3
Contents
Safety warnings ............................................................................................... 5
Unpacking ......................................................................................................... 7
Product overview .............................................................................................8
Top view ...............................................................................................................................8
Control panel ...................................................................................................................... 8
Before using your new induction hob .......................................................... 9
Choosing the right cookware ......................................................................... 9
Suitable/Unsuitable pans ............................................................................................... 10
Induction cooking is fast ................................................................................................ 10
The power will be adjusted ............................................................................................ 10
Using the touch controls ...............................................................................10
Using your induction hob ...............................................................................11
Switching on and off..........................................................................................................11
Automatic shut off ............................................................................................................11
Selecting a cooking zone ................................................................................................12
Setting the power level....................................................................................................12
Warming function .............................................................................................................13
Power boost .......................................................................................................................13
Automatic heat up ........................................................................................................... 14
Bridge mode ..................................................................................................................... 14
Setting the child lock .....................................................................................15
Timer function .................................................................................................16
Alarm function ..................................................................................................................16
Setting a cooking zone timer .........................................................................................17
Deleting a cooking zone timer ...................................................................................... 18
Cleaning and maintenance ............................................................................19
Using the scraper ........................................................................................................... 20
SINHOBB13/W13_IB.indd 3 05/08/2013 12:55
4
Wiring the hob .................................................................................................21
Opening the connection cover ..................................................................................... 22
Fitting the links ............................................................................................................... 22
Installing the hob ...........................................................................................24
Fitting the foam gasket ................................................................................................. 24
Fitting the hob into the work surface ......................................................................... 25
Troubleshooting ............................................................................................. 26
Fault codes ...................................................................................................... 27
Technical specification ................................................................................. 27
SINHOBB13/W13_IB.indd 4 05/08/2013 12:55
5
Safety warnings
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
• It is recommended that this appliance is installed by a qualified
electrical engineer. The manufacturer is not responsible for any
damage caused by incorrect installation.
• Check whether there is any damage to the appliance after you have
unpacked it. If any damage is found, do not use the appliance and
contact the store where you purchased it.
• This appliance is for Indoor Domestic Use only.
• For disconnection from the mains supply you must have a switch with
a contact separation of at least 3.0 mm in all poles and rated 32 Amp
that provides full disconnection, this must be incorporated in the fixed
wiring in accordance with the local wiring rules.
• If your mains cable gets damaged, it should be replaced by an
authorized service agent or qualified electrician in order to avoid
danger or electric shock.
• Only operate your appliance in a dry atmosphere.
• Keep the electrical cables of your other appliances away from hot
areas; do not let them touch the appliance.
• Ensure that the appliance is switched off at the mains supply switch
and allowed to completely cool down before cleaning or performing any
maintenance to avoid the possibility of an electric shock.
• Use of your appliance creates moisture in the room in which it is placed,
make sure that your kitchen is well ventilated. Maintain the natural
ventilation ducts properly.
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory and mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible
for their safety.
SINHOBB13/W13_IB.indd 5 05/08/2013 12:55
6
• Cleaning and user maintenance shall not be made by children without
supervision.
• Children should be supervised to ensure that they do not play with the
appliance.
• The appliance and its accessible parts become hot during use. Young
children should be kept away.
• During use the appliance becomes hot. Care should be taken to avoid
touching the cooking zones.
• Unattended cooking on a hob with fat or oil can be dangerous and may
result in fire. NEVER try to extinguish a fire with water, but switch off
the appliance and then cover the flame e.g. with a lid or a fire blanket.
• Danger of fire: Do not store items on the cooking surfaces.
• Do not use harsh abrasives cleaners to clean the glass since they can
scratch the surface.
• Glass ceramic hobs should not be used as a worktop. Sharp objects may
cause scratches.
• Before starting to use your appliance, keep curtains, tulle/netting, paper
or flammable materials away from your appliance.
• Do not keep combustible or flammable things on the appliance.
• This appliance is for cooking purposes only. It must not be used for
other purposes, for example room heating.
• Do not use steam cleaners for cleaning the appliance.
• If the hob surface is cracked, switch off the appliance to avoid
possibility of electric shock.
• Take care when handling parts with glass, knocks, chips, heavy handling
and dropping could cause the glass to shatter.
• The appliance is not intended to be operated by means of an external
timer or separate remote-control system.
• Metallic objects such as knives, folks, spoons and lids should not be
placed on the hob surface since they can get hot.
• After use, switch off the hob element by its controls and do not rely on
the pan detector.
SINHOBB13/W13_IB.indd 6 05/08/2013 12:55
7
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Thank you
Thank you for purchasing your new Sandstrøm Built In Induction Hob. Like all
Sandstrøm products our hobs take inspiration from traditional Scandinavian values
of quality and functionality, combined with modern innovations and a flair for simply
looking good. These operating instructions will help you use it properly and safely.
You must spend some time reading this manual in order that you fully understand all the
operational features it offers. Read all the safety instructions carefully before use and
keep this manual for future reference.
Sealing Tape
Scraper
Induction Hob
If items are missing or damaged, please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
SINHOBB13/W13_IB.indd 7 05/08/2013 12:55
8
Product overview
Top view
Control panel
1. Cooking zone 200x170mm
2. Cooking zone 200x170mm
3. Cooking zone 200x170mm
4. Cooking zone 200x170mm
1. Zone 1 and 3 bridge control
2. Power indicator
3. Bridge indicator
4. Timer indicator
5. — Timer control
6. Timer display
7. + Timer control
8. Zone 2 and 4 bridge control
9. Sliding power control (zone 4)
10. Sliding power control (zone 2)
11. Timer control
12. Power/lock control
13. Sliding power control (zone 3)
14. Sliding power control (zone 1)
1
2
3
4
1 2 3 764 5 8
910
1112
1314
Shows the actual
cooking area
SINHOBB13/W13_IB.indd 8 05/08/2013 12:55
9
Before using your new induction hob
• Remove all protective film that may still be on your induction hob.
• Clean the glass surface with a damp cloth. Do not use aggressive detergents such as abrasive
cleaners that can scratch the surface, abrasive diswashing sponges, or stain removers.
Choosing the right cookware
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth with a minimum thickness of 3mm, sits flat against the
glass, and is no less than 120mm in diameter. Always centre your pan on the cooking zone.
Always lift pans off the induction hob – do not slide, or they may scratch the glass.
• Occasionally the heated areas will switch on and off when higher heat settings are used.
This is the hob trying to keep to the power setting you have set. Some switching on and
off when cooking at high temperatures, e.g. deep fat frying is quite normal, causes no
damage to the hob and little delay in cooking times. Excessive switching may however be
caused by the use of an unsuitable saucepan. If excessive switching occurs, discontinue
the use of the saucepan.
• To improve performance, and reduce energy, always use pans with close fitting lids.
SINHOBB13/W13_IB.indd 9 05/08/2013 12:55
10
An easy way to check if your existing cookware is suitable you use with your
induction hob, is to touch the base with a magnet. If the magnet sticks to
the bottom of the pan and your pan is a minimum of 3mm thick at the base,
then it is safe to use. The thicker the base of the pan and the higher the iron
content of the pan the better.
Suitable/Unsuitable pans
Suitable Unsuitable
Special stainless steel pans Earthenware
Class Induction Some stainless steel
Hard-wearing enamelled pans Porcelain
Enamelled cast-iron pans Copper
Plastic
Aluminium
Induction cooking is fast
Cooking using an induction hob is very fast, especially at high settings. Foods and liquids will boil very
quickly so never leave the hob unattended when cooking to avoid pans boiling over or boiling dry.
The power will be adjusted
The cooking zone will adjust to the size of your cookware, it will only heat the pan, not the whole
cooking zone. This is very good for keeping energy usage to a minimum and prevents pan handles from
heating up over a cooking zone.
Using the touch controls
• The controls respond to touch, so you don’t need to
apply any pressure.
• Use the ball of your finger.
• You will hear an audible tone each time a touch
is registered.
• Make sure the controls are always clean and dry,
and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make
the controls difficult to operate.
SINHOBB13/W13_IB.indd 10 05/08/2013 12:55
11
Using your induction hob
Switching on and off
1. Touch the control. The hob will
switch on and the power levels digits
be displayed and active indicators
will flash.
2. Press the control again to switch
the hob off. If a cooking zone is still
hot the letter ‘H’ will be displayed to
show its still very hot.
• The ‘H’ symbols may flash in the display the first time your hob is connected and switched
on. This is because the hob has been heat tested at the factory, then switched off while still
hot. This may also happen if you are using the hob and you have a power cut. This is not a
fault. The ‘H’s’ will disappear from the display when you start using the hob.
• Do NOT touch the cooking zones when the hob is switched on or when a ‘H’
is displayed.
Automatic shut off
For improved safety your hob is designed to shut off after a pre set maximum time for each power
level. Even though the hob will automatically switch off, this will not prevent food from over cooking and
burning. This is to prevent the hob accidentally being left on. Each power level has a specific operating
time (see table below). The cut off time is measured from the last power level adjustment made per
cooking zone.
Power Level u 1 2 3 4 5 6 7 8 9
Maximum operating time (hours) 2 8.5 6.5 5 4 3.5 3 2.5 2 1.5
SINHOBB13/W13_IB.indd 11 05/08/2013 12:55
12
Selecting a cooking zone
Your induction hob has 4 cooking zones,
the two zones on the left and right can
be bridged to make one large cooking
zone for larger pans/cooking pot, fish
kettles or griddle plates.
You have 10 seconds to select a cooking
zone once the hob is switched on, if no
zone is selected it will switch off.
• Touch the desired sliding power
control to select the cooking zone.
• If a pan is not on the cooking zone
selected, the pan detection symbol
will flash in the display. If a pan
is not placed onto the selected
cooking zone within 10 minute of the
zone being selected the zone will
automatically switch off.
Setting the power level
Each cooking zone has 9 power levels,
a boost and a warming setting.
1. Touch the scale to select the power
level.
2. You can slide your finger up and
down the scale to adjust the power
level. Slide right to increase and left
to decrease the power level.
You can adjust the power level at any
point during cooking.
SINHOBB13/W13_IB.indd 12 05/08/2013 12:55
13
Warming function
This function is designed to keep
your food between 40˚C - 50˚C. The
temperature will depend on the type of
cookware you are using.
1. Touch and slide your finger down
the sliding power control until the ‘ ’
symbol is displayed.
2. To switch off the warming feature
touch the end of the sliding power
control and a ‘0’ will be displayed.
Power boost
The power boost function is for cooking
at maximum power for a short period
of time (max 10 minutes). Once the 10
minute power boost period has finished
the power level will automatically reduce
to level 9.
• To activate power boost, touch the
‘P’. The letter ‘P’ will be displayed.
• To deactivate power boost, touch the
sliding power control anywhere on
the scale.
The power boost function can only be used on two cooking zones at once, one on the left
zone and one on the right zone. It cannot be activated on both left or right cooking zones
at the same time. It can also not be activated if the cooking zones are bridged.
SINHOBB13/W13_IB.indd 13 05/08/2013 12:55
14
Automatic heat up
The automatic heat up feature will temporarily increase the power to max 9 for a preset time. See table
below for automatic heat up time. This is ideal if you need to get a pan to boil and then simmer.
Power setting 1 2 3 4 5 6 7 8
Time in Seconds 40 72 120 1 76 256 432 120 192
1. Touch and hold the sliding power
control at your required power level
for 3 seconds. The display will start
to flash with the selected power level
and the letter ‘A’.
• If you reduce the power level the
automatic heat up function will
switch off and cooking will continue
at the reduced power level.
• If you increase the power level the
automatic heat up function will
remain switched on unless you have
selected power level 9 or Power
Boost.
2. When the automatic heat up
functions time has elapsed the hob
will carry on cooking at the set power
level and the ‘A’ will stop flashing.
Bridge mode
This function allows you to join the two right cooking zones or the two left cooking zones together for
when you need to cook with a larger pan/cooking pot, fish kettles or griddle plates.
1. Touch the left bridge symbol to
connect cooking zones 1 and 3
together. The Bridge indicator will
light in the display of zones 1 and 3
and the bridge indicator light will
also light.
OR
Touch the right bridge symbol
to connect cooking zones 2 and 4
together. The Bridge indicator will
light in the display of zones 1 and 3
and the bridge indicator light will
also light.
SINHOBB13/W13_IB.indd 14 05/08/2013 12:55
15
The power boost function
cannot be activated if the
cooking zones are bridged.
When bridged, there is a space between the cooking zones which isn’t heated, so for best
results use a thick based pan or griddle which will conduct the heat more evenly and
quickly between the zones. This will help things cook evenly.
2. The zones will now be bridged (linked
together. To set the power level for
the left zone touch the far left (Zone
3) sliding power control. To set the
power level for the right zone touch
the far right (Zone 4) sliding power
control.
3. To switch the bridge mode off touch
the left or right bridge control. The
bridge indicators will disappear from
the displays and the power levels will
be set to 0.
Setting the child lock
The child lock can be set to prevent any of the buttons from accidentally being pressed by a child or
when you are cleaning the hob. The child lock can only be activated when the hob is switched off.
• Touch and hold the power/lock
control for 3 seconds. The light above
the control will switch on and you will
hear a long beep. All of the controls
apart from the power/lock control
will now be locked.
• To switch the child lock off touch
and hold the power/lock control for 3
seconds. The light above the control
will switch off and you will hear a
long beep.
SINHOBB13/W13_IB.indd 15 05/08/2013 12:55
16
2. Touch the or controls to select
the amount of time to count down.
After a few second the small light will
stop flashing, you will hear a beep and
the time will start to count down.
• To adjust the time touch the
control, the small light must be
flashing to adjust the time. Then
touch the
or controls.
To switch the alarm function off
3. Make sure the hob is switched on
then, touch the control, the small
light will flash. Then touch the or
controls at the same time. The
time display will show ‘00’. The alarm
function is now switched off.
4. When the set time has elapsed an
alarm will sound. To switch off the
alarm you can touch any control.
We recommend you don’t touch the
Power/lock control because this
will switch your hob off if you are
cooking.
Timer function
Your hob has two types of timer function. A timer function that can be used as an alarm and a cooking
zone cooking timer. The cooking zone timer enables you to set a cooking time for each cooking zone.
Alarm function
The maximum alarm time is 99 minutes. The hob has to be switched on to set the alarm function.
1. Touch the and ‘00’ will be
displayed. A small light will flash to
show the time display is active.
If you do not switch off the alarm sound
it will automatically switch the sound off
in approximately 2 minutes.
SINHOBB13/W13_IB.indd 16 05/08/2013 12:55
17
Setting a cooking zone timer
Each cooking zone can be set to switch off at different times e.g. zone 1 set to switch off in 10 mins,
zone 2 in 15 mins, zone 3 in 12 mins and zone 4 in 25 mins. You can also set a cooking zone timer for
the bridged zones. When the cooking time has elapsed the cooking zone will switch off and an alarm
will sound.
1. Select a cooking zone or bridged
cooking zone and set the power level
you wish to cook at.
2. Touch the control twice to select
the cooking zone timer mode.
Continue touching the control
until you see the desired zone
indicator light for your cooking zone.
The indicator light and timer symbol
for the selected zone will flash.
3. Touch the or controls to select
the amount of time to count down
for that cooking zone (max 99 mins).
If you only want to set one timer, wait
for the hob to beep and it’s now set.
The indicator light will flash and the
time will start to count down.
Zone 1 indicator
Zone 3 indicator
Zone 2 indicator
Right bridge
both indicators
Touch to scroll through
the cooking zones
Left bridge
both indicators
Zone 4 indicator
SINHOBB13/W13_IB.indd 17 05/08/2013 12:55
18
4. To set a timer on another zone select
a cooking zone and set the power
level you wish to cook at. Touch
the control repeatedly until the
indicator light flashes next to the
new zone.
5. Touch the or controls to select
the amount of time to count down
for that cooking zone. Wait a few
seconds and the timers will start.
The timer display will always show the time of the first timer to finish and its indicator light will be
flashing. When the first timer finishes the cooking zone will switch off and an alarm will sound. Then the
next timer to finish will be displayed. This process will repeat until all timers are finished and all cooking
zones are switched off.
When the alarm sounds to tell you a zone has switched off you can touch any control to switch off the
sound, or if you leave it, the alarm sound will automatically switch off in approximately 2 minutes.
Deleting a cooking zone timer
1. To delete a cooking zone timer,
touch the control repeatedly until
the indicator light displays for the
cooking zone timer you want
to delete.
2. Touch the or controls at the
same time and the time in the display
will be set to ‘00’. The cooking zone
timer is now deleted.
The cooking zone will not
switch off if you cancel a timer.
SINHOBB13/W13_IB.indd 18 05/08/2013 12:55
19
Cleaning and maintenance
Before attempting any cleaning make sure the hob is switched off and has cooled down.
What? How? Important!
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)
1. Switch the power to the hob off.
2. Apply a glass hob cleaner while
the glass is still warm (but not
hot!)
3. Rinse and wipe dry with a clean
cloth or paper towel.
• When the power to the hob is
switched off, there will be no ‘hot
zone H’ indication but the cooking
zone may still be hot!
Take extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check if your cleaner or scourer is
suitable.
• Never leave cleaning residue on
the hob: the glass may become
stained.
Boilovers, melts, and
hot sugary spills on
the glass
Remove these immediately with a
fish slice, palette knife or razor blade
scraper suitable for ceramic glass
hobs, but beware of hot cooking zone
surfaces:
1. Switch the power to the hob off.
2. Hold the blade or utensil at a 30°
angle and scrape the soiling or
spill to a cool area of the hob.
3. Clean the soiling or spill up with a
dish cloth or paper towel.
4. Follow steps 2 to 3 for ‘Everyday
soiling on glass’ above.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
Spillovers on the
touch controls
1. Switch the power to the hob off.
2. Soak up the spill.
3. Wipe the touch control area with
a clean damp sponge or cloth.
4. Wipe the area completely dry with
a paper towel.
• The hob may make an audible
tone or turn itself off, and the
touch controls may not function
while there is liquid on them.
Make sure you wipe the touch
control area dry before turning
the hob back on.
SINHOBB13/W13_IB.indd 19 05/08/2013 12:55
20
Using the scraper
1. Slide the protective cover back to
reveal the blade.
• The blade is very sharp be careful when
handling and using the scraper.
• Keep the scraper out of the reach
of children.
2. Place the scraper blade flat against
the hob surface. Hold the scraper at
an angle of around 30˚and slide it
against the hob to remove spills.
Take care when scraping over the
hot markings.
3. Wipe clean with a damp cloth.
30°
• Do NOT use the scraper at 90˚to the hob as this could damage the hob surface.
• Always keep the blade flat on the surface of the hob, do NOT use the corners of the blade
as this will scratch the hob surface.
SINHOBB13/W13_IB.indd 20 05/08/2013 12:55
21
• If the mains cable is damaged and needs to be replaced, this should be done by a qualified
person using the proper tools, so as to avoid any accidents.
• The hob must be connected directly to the mains supply, an omnipolar circuit breaker must
be installed with a minimum gap of 3mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and that it
complies with safety regulations.
• The mains cable must not be bent excessively or compressed.
• The mains cable must be checked regularly and only replaced by a qualified person.
Wiring the hob
• Before proceeding with the electrical connection, verify that the current carrying capacity of the
system and the socket is adequate for the maximum power rating of the hob.
• If there is no dedicated hob circuit and fused switch, they must be installed by a qualified electrician
before the hob is connected.
• The fused switch must be easily accessible once the hob has been installed.
• Do not use adaptors, multiple sockets and/or extension leads.
• A circuit breaker with a contact opening of at least 3mm, rated 32A and delayed functioning type
must be installed inside the supply circuit.
• The cable must have these minimum specifications. Type H05VV-F or H05RR-F 4X2.5mm2 for 3 phase
or 3X6mm2 for single phase. You will find the connection diagram shown on the bottom of
your appliance and in this instruction book (for single phase connection).
• Make sure the cable is routed away from hot parts.
• An incorrect connection might damage your appliance. The guarantee will not cover such damages.
• All repairs must be carried out by an authorised service personal or a qualified electrician.
• Make sure your hob is disconnected from the mains supply before any maintenance.
• Cooking hobs are not provided with a supply cord.
SINHOBB13/W13_IB.indd 21 05/08/2013 12:55
22
Fitting the links
The links are stored in the slot inside the connection box. Fit one link into positions 1 and 2 and the
other link into positions 4 and 5.
5 4 3 2 1
5 4 3 2 1
Opening the connection cover
Insert a small flat head screwdriver into the 2
slots (1 and 2) on the connection cover. Gently
lever the screwdriver in the direction shown
and remove the cover.
1
2
SINHOBB13/W13_IB.indd 22 05/08/2013 12:55
23
Use a 3 x 6mm2 cable for wiring the hob.
1. Connect the live (brown) wire to the terminal marked 1 or 2.
2. Connect the neutral (blue) wire to the terminal marked 4 or 5.
3. Connect the earth (yellow and green) wire to the terminal marked . Make sure the earth wire is
longer than the live and neutral wires.
4. Un-screw the cable clamp and place the cable under the clamp and then screw the clamp closed.
5. Replace the lid on the connection box, making sure it clips into place.
5 4 3 2 1
• Do NOT over tighten the screws
SINHOBB13/W13_IB.indd 23 05/08/2013 12:55
24
Installing the hob
Measurements shown in the diagram are
minimum distances.
The hob must have sufficient air
circulation.
If the hob is going to be installed on the
top of a built in oven the proper air vents
must be installed to guarantee adequate
ventilation. Air must be allowed to
circulate under your hob.
✘
✔
Fitting the foam gasket
1. Turn the hob over and lay it flat so the underneath is facing up. You may wish to lay it on something
soft like a towel so not to scratch the hob surface.
2. Cut 4 lengths of the gasket to fit neatly around the hob. Peel the back off the gasket and stick it to
the hob as shown. Make sure you do NOT overlap the ends of the gasket.
600 mm
30 mm
40 mm
40 mm
40 mm
450 mm
Curtains 2000 mm
650 mm
20 mm
min 20 mm
6 mm
140 mm
Min cross
section area
of vent
1200mm
Oven
or
cupboard
2
SINHOBB13/W13_IB.indd 24 05/08/2013 12:55
25
Fitting the hob into the work surface
1. The hob can be installed into a work surface of a depth between 30-50mm. Make sure you have
fitted the gasket. Cut a hole in the work surface 560mm(w) x 490mm(D) and slot the hob into
the hole.
510mm
560mm
490mm
600mm
600mm
40mm(min)
✘
20mm
6mm
✔
✘
2. You must leave a 20mm
space below the hob.
• Do NOT install a drawer
directly under the hob.
SINHOBB13/W13_IB.indd 25 05/08/2013 12:55
26
Troubleshooting
If you think your hob isn’t working properly the following should help you find out what might be wrong.
Symptom Possible cause Solution
Symbols appear in the display
when the hob is first switched
on.
The hob has been switched on and
tested in the factory.
This is normal the symbols will disappear
when you use the hob.
The fan remains active for
several minutes after the hob
has been switched off.
The hob is cooling down. This is normal, the fan will switch off in a
few minutes.
You can hear a ticking sound
while the hob is on.
Ticking occurs when cooking at
lower power levels.
This is normal and nothing to be worried
about.
The pans make a noise while
cooking.
This is caused by energy flowing
from the hob to the pan.
At high setting this is perfectly normal
for some pans. It will not damage the
hob or pan.
You have switched on a
cooking zone and the display
is flashing.
You haven’t placed a pan centred
on the cooking zone.
The pan is too small (less than
120mm in diameter)
The pan is not suitable for
induction hobs (Choosing the right
cookware)
Place a pan on the cooking zone.
Use a larger pan (over 120mm).
Use a pan designed for induction hobs.
The cooking zone switches off
and starts beeping.
You have set a cooking zone timer
that has expired.
Touch any control the switch the alarm
off.
The hob is not working and
the display won’t switch on.
The power to the hob may have
been switched off.
The child lock may have been
switched on.
Make sure the power is switched on to
the hob.
Touch and hold the lock control to switch
the child lock off.
A fuse blows when the hob is
switched on.
The hob may not have been
connected correctly.
Check the connections match the
connection diagram in this instruction
book.
The hob switched off. You may have accidentally touched
the power control.
Touch the power control again to switch
the hob back on.
SINHOBB13/W13_IB.indd 26 05/08/2013 12:55
27
Fault codes
Code Possible cause Solution
ER22 The control may be dirty or have
water on it.
Clean the control panel.
E2 The hob has overheated. Allow the hob to cool down.
E3 The pans you are using are not
suitable.
Use pans that are designed to be used
with induction hobs.
U400 The voltage is too high and/or the
hob is not properly connected.
Check your connections.
Display shows
Something may be resting on the
controls.
Remove any objects on the controls or
do not touch them for so long.
If you see any other fault code please contact your service agent.
Technical specification
Model No. SINHOBB13/SINHOBW13
Dimensions (w x d x h) (mm) 600 x 510 x 48
Voltage (V) 220 – 240 ~
Frequency (Hz) 50
Max Power Consumption (W) 7400
Standby Power Consumption (W) < 0.5
Features and specifications are subject to change without notice.
SINHOBB13/W13_IB.indd 27 05/08/2013 12:55
IB-SINHOBB13_W13-130805V2
DSG Retail Limited (Registered in England No. 504877), Maylands Avenue,
Hemel Hempstead, Hertfordshire HP2 7TG. UK
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over
1 million spares and accessories available we can deliver direct to your door the very next day.
Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only)
Calls charged at National Rate.
For general information about this appliance
and handy hints and tips, please visit
www.knowhow.com/knowledgebank or call 0844 5611234.
SINHOBB13/W13_IB.indd 28 05/08/2013 12:55
Loading...