WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
provide a record of their order such as the order number, or
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
NOTE:
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
MAINTAINANCE
PARTS
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or
polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
Not for commercial use, For residential use
only.
LIST
A: X1
E: X1
B: X1
F: X1
G: X1
D: X1C: X1
H: X1
Weight Limitation
110LBS
I: X1
J: X4
C
A
F
①
④
④
H
③
③
I
④
J
②
④
OVERVIEW
E
D
G
B
J
J
HARDWARE
ASSEMBLY
LIST
①: X2
⑥： X12
⑪: X1
SPARE
②: X4
M3*10mm
⑦: X12
⑫: X1
③: X4
M3*10mm
⑧: X12
∅21mm
⑬: X1
④: X4
⑨: X12
∅8*30mm
⑤: X24
M3*12mm
⑩: X16
M6*25mm
INSTRUCTIONS
⑫
⑨
⑥
⑫
②
A
②
&
B
⑤: X1
M3*12mm
⑥: X1
⑦: X1
⑧: X1
∅21mm
⑨: X1
∅8*30mm
⑩: X1
M6*25mm
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
STEP 1: Preparation for panel A and B as the picture show.
Insert wooden dowel#⑨ into the predrilled hole on panel A
and B.
Screw into cam
bolt #⑥ into screw holes on panel A and B
by screwdriver#⑫.
Attach the parts#② on the postion of panel A and B with
screw # ② by screwdriver#⑫.
⑥
⑫
⑥
C&D
⑥
⑦
⑫
⑧
⑨
E
C
STEP 2: Preparation for panel C and D as the picture show.
Screw in cam bolt #⑥ into screw holes on panel C and D by
screwdriver#⑫.
Insert wooden dowels into prodrilled holes on panel C and D
by hand.
⑥
⑨
⑦
⑫
E
D
⑧
C
STEP 3: Attach the panel C and D with panel E as the picture
show.
Insert cam bolts #⑥ and wooden dowels#⑨
the hole on panel E at the same time, then tighten the screw
nut#⑦ by screwdriver#⑫.
Use the same way to finish panel D and E.
Donn't forget to use sticker #⑧ to cover the screw hole to
look nice!
on panel C in to
D
F
D
E
C
G
C
G
⑥
⑨
⑫
⑧
⑦
A
E
B
C
STEP 4: Insert the panel F and G into the grooves on
panel C, D and E as the picture show.
STEP 5:Attach the panel A and B with the finished parts in
step 4.
Insert the cam bolt #⑥ and wooden dowels#⑨
holes on panel C and D , then fasten the cam bolt#⑥ with
cam nuts#⑦ by screwdriver#⑫ as the picture show.
Repeat the same way to finish panel B with panel C and D.
Donn't forget to use sticer#⑧ to cover the screw holes to
look nice!
into the
⑩
⑩
⑪
J
⑩
⑫
①
STEP 6:Attach the legs.
Align the holes on the panel B with legs J to
attach the legs J with screw#⑩ by screwdriver#⑪
as the picture show.
①
①
④
⑤
I & H
STEP 7:Prepartion for panel I and H.
Align the hole on the panel and Attach the handler#①on
the panel I and H with screw #① by screwdriver #⑫
Attach the hardware#④ on the panel I and H with
screw#⑤ by screwdriver#⑫.
Make sure install the screw on the predrilled position.
.
⑫
④
⑬
⑫
⑤
③
⑫
STEP 8: Attach the metal plate#③ on the panel I and H with
screw#③ by screwdriver#⑫.
then, attach the hardware #④ on the panel I and H to the
panel C and D with the screw #⑤ by screwdriver#⑫.
Make sure use the predrilled positionson on the panel.
STEP 9: Install the anti-collapse set.
Loading...