Page 1
INSTALLATION GUIDE
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
Released Date: 2021-04-02
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance email customercare.
PACKAGE CONTENTS
A
MOUNTING HARDWARE
Crossbar Assembly
AA
x 1
Fixture Loop with
Center Stem
x 1
Wire Connector
BB
x 3
Fixture Body
B
x 1
Outlet Box Screw
CC
x 2
Ceiling Canopy
DD
x 1
Shade
C
x 5
Socket Collar
(preassembled
D
on fixture body)
x 5
Lock Ball
E
x 1
Quick Link
EE
x 2
Fixture Chain
FF
x 1
- 1 -
Page 2
INSTALLATION
Pull the Wire and Install Lock Ball
1
The fixture sockets can be assembled upwards or downwards.
Option 1: Sockets Upwards Option 2: Sockets Downwards
Pull top Wire untill the Wire under the Juction box out of the
Juction box
Top Wire
Juction Box
Once socket directions are set, please refere to the following steps to complete rest installations.
Install Center Stem and Fixture Loop
2
Pull top Wire untill the Wire under the Juction box get into
the Juction box
Install Crossbar Assembly
3
Top Wire
Juction Box
Outlet Box
Install Fixture Chain
4
OPTIONAL: Adjust Chain
as desired, using pliers and
soft cloth (neither included)
to remove extra links.
Canopy Lock Ring
Pull Supply Wires
5
Pull the supply wires with
* Ceiling Canopy shape
is varis depends on
items purchased.
Ceiling Canopy
Canopy Lock Ring
G
L
N
ground wire through the
chain alternate links.
G
L
N
- 2 -
Page 3
INSTALLATION
Wiring
6
White wire from supply
Black (or red) wire from supply
Ground wire from supply
Green ground screw
Install Glass Shade
8
Ribbed side of wire from
fixture identified with the
label “N”
Smooth side of wire from
fixture identified with the label “L”
Ground wire from fixture
identified with the label “G”
9
Install Ceiling Canopy
7
Install Bulbs
* Ceiling Canopy shape
is varis depends on
items purchased.
Install five correct bulbs referring to
fixture markings and/or labels for
maximum wattage.
Your installation is now complete! Restore electricity and save this sheet for future reference.
Recommended Bulb type (not
included):
100W
MAX
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
- 3 -
Loading...