Page 1
Flat Washer
Allen Key
Glue
Lock Washer
1 pce
1 pce
Pan Head Screw
JCBC Bolt(Short)
JCBC Bolt(Long)
6 pcs
2 pcs
8 pcs
10 pcs
10 pcs
FIGURE
DESCRIPTION
QTY
1
2
3
4
5
6
7
Hardware Bag
1 pce
1 pce
1 pce
1 pce
1 pce
1 pce
2 pcs
PART NO
FIGURE
DESCRIPTION
QTY
Wood Seat
Chair Back
Front Leg (Right)
Front Leg (Left)
Front Stretcher
Side Stretcher
(L/R)
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST: HARDWARE LIST:
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
Page 1 of 2
MADE IN MALAYSIA
Page 2
ASSEMBLY :
STEP 1
Step1: Attached wood seat to the chair back using the provided hardware as shwon on Fig.1.1 and Fig.1.2.
Step2: Attached front legs (Left and Right) to wood seat and the side and front stretchers to front legs and
chair back using the provided hardware as shown in Fig.2.1 and Fig.2.2
STEP 2
Front
Stretcher
Right Leg
Left Leg
Allen Key
JCBC Bolt (Long)
Lock Washer
Flat Washer
Allen Key
JCBC Bolt (Short)
Lock Washer
Flat Washer
(Fig.1.1)
(Fig.1.2)
(Fig.2)
Flat Washer
Lock Washer
JCBC Bolt (Long)
Allen Key
(FIG.2.2)
Apply Glue
Pan Head Screw
STEP 3
3.1- Turn the chair to standing position.
Check it's balance and tighten all screw and bolts to complete the assembly.
3.2-
Assembly is now Completed.
Page 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
MADE IN MALAYSIA
Loading...