Page 1
Taylor 30” Bathroom Vanity
Thank you for Shopping with us!
We hope we were able to provide
quality and functionality in mind. We hope you enjoy this new addition!
Your feedback is invaluable to us and we would love to hear about your experience. Please take the
time to leave us a review.
We encourage you to take a few minutes to go through this booklet. It contains important information on installation
and care tips to keep your furniture looking as good as new.
your home with the perfect vanity. This vanity has been constructed with design,
Page 1 of 4
Page 2
Taylor 30” Bathroom Vanity
Before assembly and installation, please check and ensure you received the items in the below “Part List”.
Please report any missing items to your retailer immediately.
Part List
Part C - Vanity w/top 1 PC
Part A - Vanity
legs 2 PCS
Part D – Shelf
w/ L-Brackets
Part F – Hardware Pack
Part B - Vanity
legs 2 PCS
NOTES, ASSEMBLY AND INSTALLATION
● Faucet, Drain, Silicone and all other plumbing components are not included.
● Handling will require two people.
● Ensure the vanity is installed on a level floor. Unevenness can cause the vanity to become misaligned,
resulting in twisting of the cabinet. Balance any uneven areas by using the adjustable levelers.
● Ensure all building & plumbing codes are respected. Professional installation recommended.
● Follow below steps for assembly and installation.
Page 2 of 4
Page 3
STEP 1:
Place the vanity face down on a
soft surface to begin assembly.
To attach the four vanity legs
including part A and B, ensure to
place part ‘A’ legs in the location
marked for part ‘A’ and part ‘B’
legs in the location marked for
part ‘B’.
Using the larger hardware (5/16
size) enclosed in the hardware
pack, including the 4 bolts (H1), 4
lock washers (H2) and 4 flat
washers (H3) secure the legs to
the vanity using the Allen wrench
(H7) as pictured on the right.
STEP 2:
To attach the shelf (D) to the
vanity with the assembled legs,
align the L-bracket already
attached on to the shelf with the
existing holes in the installed legs.
Using the smaller hardware (1/4)
enclosed in the hardware pack,
including the 4 bolts (H4), 4 lock
washers (H5) and 4 flat washers
(H6), secure the shelf to the
installed legs on the vanity using
the Allen wrench (H7) as pictured
Taylor 30” Bathroom Vanity
on the right.
STEP 3
Place the vanity in the desired location and ensure the vanity is level using the adjustable levelers.
Install the faucet and all plumbing.
Ensure there are no water leaks.
Page 3 of 4
Page 4
Taylor 30” Bathroom Vanity
CARE, CLEANING AND MAINTENANCE
Dust regularly with a soft, dry cloth.
Avoid the use of all chemicals, household cleaners, abrasives or cleaners that contain lemon, vinegar or other
acids that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood furniture.
The porcelain sink is resilient, but care needs to be taken to preserve its appearance.
Do not place hot appliances, such as curling irons and hot hair dryers directly on the counter top. Wipe spills
immediately.
DIMENSIONS
TOP VIEW
770 [30 3/8"]
Adjust the hinges, if required.
35 [
44 [
1 3/8"]
1 3/4"]
BACK VIEW
657 [25 7/8"]
470 [18 1/2"]
866 [34 1/8"]
366 [14 3/8"] 362 [14 1/4"]
Page 4 of 4
Loading...