Page 1
TRESTLE DESK WITH CHARGING STATION
ASSEMBLY INSTRUCTIONS
We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Page 2
Long Screw & Inserted Nut
（12pcs）
Glue（1pc）
Screw （6pcs）
PAGE 2 OF 6
A GF
Cambolt & Camlock (4pcs)
Hole sticker（12pcs）
B
Wood dowel（8pcs）
C
Middle Shelf
(1pc)
H
Allen wrench（1pc）
Part List
Bottom Shelf
(1pc)
Socket Strip(1pc)
Desktop (1pc)
Shelf Supports
(4pcs)
I
Small Screw
(2pc)
D
E
Left
Frame
(1pc)
Support Rail (1pc)
Middle
Frame
(1pc)
Right
Frame
(1pc)
Insert camlock，
camlock must face
bolt hole
Gently screw
cambolt into the
threaded anchor
Lightly glue one end
of woode dowel and
tap into hole.
Lightly glue dowel
and connect to second
panel by inserting
dowels into holes
Gently screw the
clockwise into locked
position.
Do not overtighten.
camlock
Page 3
*Assemble unit on carpet or other so surface.
step1
1. Insert Wooden dowels (B) and screw
Cambolts (A) to Middle Shelf (2)
2.Insert Camlocks(A) into holes in
Shelf Supports(4).Camlock arrow must
face bolt hole.
3.Connect Shelf Supports（4）to
Middle Shelf(2).
Gently tighten camlocks.
4
4
2
4
B
A
PAGE 3 OF 6
A
4
2
*Refer to page 2 for cam assembly
step2
1. Insert Wooden dowels (B) and screw
Cambolts (A) to Boom Shelf (3)
2.Insert Camlocks(A) into holes in
Shelf Supports(4). Camlock arrow
must face bolt hole.
3.Connect Shelf Supports（4）to
Bottom Shelf(3).
Gently tighten camlocks.
4
3
4
4
A
4
A
B
3
Page 4
PAGE 4 OF 6
step3
1.Insert Nuts into Middle Shelf(2)
and Bottom Shelf(3) and make sure
Nut hole faces to bolt hole.
（as seen in Diagram #1）
2.Carefully connect Left Frame(6)
and Middle Frame(7) to Shelves
(2)and(3).(Long Screw(C) goes
through the Frame.Line up holes and
insert screws.)
Tighten Long Screws(C).
C
G
C
Diagram #1
C
C
3
C
C
2
7
6
Large screw hole side faces outside
step4
1.Place Desktop on
carpet or soft
surface.
2.Connect the
assembly and Right
Frame(8) to
Desktop(1).
Tighten Screws(D).
G
Small screw hole side faces inside
8
D
6
7
FRONT
Page 5
step5
1.Insert Nuts into Support
Rail(5)and make sure Nut hole faces
to bolt hole.
2.Carefully connect Support
Rail(5)to Middle Frame(7) and Right
Frame(8).(Long Screw(C) goes
through the Frame.Line up holes and
insert screws.)
Tighten Long Screws(C).
PAGE 5 OF 6
5
C
C
G
step6
1.Carefully turn the desk。
2.Place hole stickers (F)
over screw holes.
F
B
Page 6
step7
PAGE 6 OF 6
1.Aach Socket Strip (H) to Desktop using Small Screws (I) as shown.
2.Enjoy !
1
I
H
Loading...