18” END TABLE
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST: HARDWARE LIST:
FIGURE
DESCRIPTION
Hardware Bag
Table Top
Legs
Fixed Shelf
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
QTY
1 pce
1 pce
4 pcs
1 pce
PART NO
1
2
3
4
5
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
FIGURE
DESCRIPTION
HexBolt
Pan Head Screw
Lock Washer
Flat Washer
Wrench
QTY
8 pcs
4 pcs
8 pcs
8 pcs
1 pce
Page 1 of 2
ASSEMBLY :
18” END TABLE
STEP 1
1.1-Pull out the Drawer Box as shown and Turn the Table Top upside down on a protective surface such as carpet or other soft
materialas shown in the Fig1.
1.2-Use Flat Washer(4), Lock Washer(3), Hex Bolt(1) and Wrench(5), to attach three legs randomly to the table top,
do not fully tighten yet.
1.3-Insert the fixed shelf into the legs as shown in the Fig1.
Flat Washer
Lock Washer
Hex Bolt
Wrench
STEP 2
2.1-Insert the last leg to the corner of apron frame and Fixed Shelf.Then tighten with Flat Washer(4), Lock Washer(3) and
Hex Bolt(1) using the Wrench(5) provided.
2.2- Insert and tighten the Pan Head Screw(2) using a screw-driver (Not provided) into the Fixed Shelf to scure Shelf as shown
on Fig.2
Fig.1
Fig.2
STEP 3
3.1- Turn table to uprigtht position.
3.2- Once 18” end table is fully balance fully tighten all bolts.
Fig.3
Assembly is now Completed.
Page 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
Loading...