Page 1
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST: HARDWARE LIST:
FIGURE
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
DESCRIPTION
Hardware Bag
Chair Back
Wood Seat
Front Legs
QTY
PART NO
1
1 pce
2
1 pce
3
1 pce
2 pcs
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
4
5
FIGURE
DESCRIPTION
JCBC Bolt(Short)
JCBC Bolt(Long)
Lock Washer
Flat Washer
Allen Key
QTY
2 pcs
8 pcs
10 pcs
10 pcs
1 pce
Page 1 of 2
Page 2
ASSEMBLY :
STEP 1
Step1: Attached wood seat to the chair back using the provided hardware as shown on Fig.1.1 and Fig.1.2.
Step2: Attached front legs to wood seat using the provided hardware as shown in Fig.2.
STEP 2
(Fig.2)
Flat Washer
Lock Washer
JCBC Bolt (Long)
Allen Key
Allen Key
JCBC Bolt (Long)
Lock Washer
Flat Washer
Allen Key
JCBC Bolt (Short)
Lock Washer
Flat Washer
(Fig.1.1)
(Fig.1.2)
STEP 3
3.1- Turn the chair to standing position.
Check it's balance and tighten all screw and bolts to complete the assembly.
3.2-
Assembly is now Completed.
Page 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
Loading...