Page 1
053C ACCENT CHAIR
Chair
A
B
1 pc 4 pcs
Bolt
C D
Ø1/4"*2"
8 pcs 8 pcs
Flat Washer
E F
1/4" 1/4"
Leg
Lock Washer
1/4"
Allen Wrench
8 pcs 1 pc
This page lists all the contents included in
the box. Please take the time to identify
the hardware as well as the individual
components to this product. As you
unpack and prepare for assembly, place
the contents on a carpeted or padded area
to protect them from damage.
1
Page 2
Upside down the Chair (A) on a carpeted or padded area. Take out 4pcs Leg (B) from the box.
1
B
A
Put the Chair (A) on a smooth flat surface and attach Leg (B) to the Chair (A) using Bolt (C), Lock
2
Washer (D) and Flat Washer (E) on both holes of Chair (A). Turn the Allen Wrench (F) in Bolt (C).
Take the Allen Wrench, and turn the bolts
until the legs are secured.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding force to
tighten the bolt.
A
B
Stand chair up on an even surface and check that it is
balanced. If there is a slight wobble, apply downward
pressure in the corner where a leg is uneven. Keeping
pressure in that corner, tighten all bolts. If balanced,
apply downward pressure evenly in the center and
tighten all bolts. Do not over-tighten beyond hole
depth.
E
D
C
F
Helpful Tip:
-Instead of applying downward
pressure while reaching under to
tighten bolts, have someone sit in
the chair while you tighten the
bolts.
2
Page 3
Two people are required to orientate the chair on an even surface and check that it is balanced.
3
Cleaning & Care
Treat surface with care. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Hardware may loosen over time. Periodically check that all connections are tight.
3
Loading...