Page 1
ASSEMBLY INSTRUCTIONS
OUNTER STOOL
C
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that
may have come loose inside the carton during shipment.
Key Parts
No
1
2
3
4
5
6
7
8
Q'Ty
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
4 pcs
Chair Back
Complete Seat
Right Facing Front Leg
Left Facing Front Leg
Right Facing Stretcher
Left Facing Stretcher
Front Stretcher
Floor glide
Description
STEP 1:
- Carefu
surface to prevent scratches.
- Attach Complete Seat to Chair Back by inserting a
Flat Washer (C), Lock Washer (B) with Short Bolt
(E) into each of the hole on the back rail of the seat,
and Long Bolt (D) into each of 2 holes in the
Complete Seat corners. (See Detail A & B).
- Tighten screws with provided Allen Key (F) by
turning clockwise until secure
lly lay Chair Back flat on a smooth flat
DETAIL B
No
A
B
C
D
E
F
G
H
Hardware kit
Description
Hexa Nut Ø8
Lock Washer Ø8.5
Flat Washer Ø8.5
Long Bolt Ø7.8 x 80mm
Short Bolt Ø7.8 x 38mm
Allen Key
Key Wrench
Screw Ø4 x 40mm
Q'Ty
4 pcs
11 pcs
11 pcs
4 pcs
3 pcs
1 pc
1 pc
6 pcs
DETAIL D
DETAIL C
STEP 2:
- Carefully turn Chair upside
down and attach each Leg to the
front corners of the Complete
Seat.
- Place Flat Washer (C), Lock
Washer (B) and Nut (A) on for
each bolt, using provided Key
Wrench (G).
- Do not fully tighten the Nuts at
this stage until all the parts are
in position (See Detail C).
- Insert 2 Side Stretchers
between the Front Legs, fasten
with Wood Screw using
phillíp-head screwdriver. (not
provided). (See Detail D)
- Be sure to tighten all screws
and nuts prior to using Chair.
DETAIL A
Loading...