Sand & Stable W002488443 Owner Manual

Page 1

INSTALLATION GUIDE

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.

• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read instructions completely before beginning installation.

• If in doubt about electrical installation, consult a licensed electrician.

• Turn off electricity to fixture before replacing the bulb(s).

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

White wire from supply

Black (or red) wire from supply

Ground wire from supply

Green ground screw

Apply Caulking (Backplate shape is varies depends on items

purchased)

White from fixture

Black from fixture

Ground wire from fixture

*Note: Do NOT caulk the bottom of the backplate to allow moisture

to escape.

Exterior Caulk

Rectangle/Square Backplate Round Backplate

Install Bulb

Install the correct bulb referring to fixture markings and/or labels for maximum wattage.

Your installation is now complete! Restore electricity and save this sheet for future reference.