Sand & Stable W001448916 Owner Manual

Page 1
4-PIECE RESIN WICKER & ACACIA
PATIO FU
RNITURE SET
HELPFUL HINT
Decor advises reading this manual fully, and assembling the furniture set soon after purchase. Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
Page 2
COMPONENTS
Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
A B C D E
Loveseat Backrest
Qty. 1
Loveseat Seat
Qty. 1
Right Arm Panel
Qty. 3
F HG J
Chair Seat
Qty. 2
X
Back Pillow
Qty. 4
Table End Panel
Qty. 2
W
Tabletop
Qty. 1
Table Side Panel
Qty. 2
Z
Throw Pillow
Qty. 1
Tip: Always fully insert the hex key inside designated notch of the bolt.
If the hex key is not fully inside the notch, the hex key could slip out, causing damage to the bolt head. Repeated hex key slipping will cause
the notch to become rounded, making it di󰀩cult
or impossible to tighten the bolt with the hex key.
Left Arm Panel
Qty. 3
Loveseat Cushion
Qty. 1
Chair Backrest
Qty. 2
Q
Chair Cushion
Qty. 2
Hardware
WARNING!
CHOKING HAZARD — Small parts. Keep children away during assembly.
1 2 3 4 5 6
M6x40mm
Bolt
Qty. 28
HELPFUL HINT: Do not tighten hardware until all components have been loosely assembled.
If the hardware is tightened too soon, mounting holes may not align, and parts may not easily t together.
M6x30mm
Bolt
Qty. 12
M6x100mm
Bolt
Qty. 6
M6
Washer
Qty. 46
M4
Cap
Qty. 6
M4
Hex Key
Qty. 2
Page 3
LOVESEAT ASSEMBLY
STEP 1 STEP 2
A: 1
B:
1
1:
2
4:
2
C:
1:
3:
4:
5:
1
4
1
5
1
Do not fully tighten hardware until after Step 3 is complete. Do not fully tighten hardware until after Step 3 is complete.
STEP 3 STEP 4
D:
1:
3:
4:
5:
1
4
1
5
1
J:
X:
Z:
1
2
1
Do not fully tighten hardware until all components in this step
have been connected.
Page 4
INDIVIDUAL CHAIR ASSEMBLY
STEP 5 STEP 6
E: 1
F:
1
1:
1
4:
1
C:
1:
3:
4:
5:
1
4
1
5
1
Do not fully tighten hardware until after Step 7 is complete. Do not fully tighten hardware until after Step 7 is complete.
STEP 7 STEP 8
D: 1 1:
4
3:
1
4:
1
5:
1
Q: 1
X:
1
X
Q
Do not fully tighten hardware until all components in this step have been connected.
Page 5
TABLE ASSEMBLY
STEP 9 STEP 10
G: 1
H:
2
2:
2
4:
2
G:
2:
4:
1
2
2
Do not fully tighten hardware until after Step 11 is complete. Do not fully tighten hardware until after Step 11 is complete.
STEP 11
W: 1
2:
8
4:
8
Do not fully tighten hardware until all components in this step
have been connected.
Page 6
Care & Maintenance
Resin wicker furniture requires minimum maintenance.
Follow these basic tips to prolong the life of your resin wicker furniture.
Protect: Storing cushions indoors when the furniture is not in use is highly recommended.
Cover: Covering the furniture with a breathable cover when it's not being used will help protect it from the harmful e󰀨ects
of sunlight, dust build-up, and collecting debris.
Sun Exposure: All materials and fabrics will eventually fade and degrade from sun exposure. Maintain cushion color and integrity by covering the furniture or storing cushions indoors when not in use.
Winter Care & Storage: Move the furniture to a cool, dry location to preserve the quality and to protect the frame from rusting. Covering furniture while in storage is recommended to help prevent dust build-up. Ensure cushions are stored in a location safe from critters and are completely dry before storing.
Cleaning
Regular cleaning keeps your resin wicker furniture looking stunning for many Sunnydaze to come!
Do not use harsh chemicals or abrasive materials to clean the furniture.
DO NOT USE BLEACH DO NOT USE A PRESSURE WASHER HAND-WASH ONLY
Cushions/Pillows
Brush or vacuum loose dirt from the cushions.
Wipe the cushions down using a soft cloth and cool water. For more stubborn stains, clean with mild soap and cool water, using a soft-bristle brush.
Furniture
Remove all cushions.
Brush, vacuum or use a garden hose to remove loose dirt and debris. If using a hose with a spray nozzle, use gentle or medium pressure settings; high-pressure sprayer settings will damage the construction of the furniture and void the product warranty.
Mix 1/4 cup of soap or mild detergent with 1 gallon of warm water. Using a soft-bristle brush, gently scrub the dirt and grime from the resin wicker.
Spray with the garden hose or use a bucket of water to rinse all traces of soap residue from the furniture.
Wooden Surfaces
Use a slightly damp cloth to wipe down wooden surfaces. Dry with a soft, lint-free cloth.
SAFETY STATEMENTS & WARNINGS
• Do not exceed the weight capacity of the furniture. Do not sit, stand, or climb on the table.
• Inspect hardware often and tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Keep furniture a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
Any modication to the product or failure to follow recommended care will void the product warranty.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
Loading...