Page 1
Pine Adirondack Chair
Assembly Instructions
Thank you for choosing
our product.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us.
Page 2
PARTS (included)
Seat
Assembly
HARDWARE (included)
Back
Assembly *
¼” X 2” Bolts (8)
Allen wrench (1)
Right Arm
& Leg
Assembly
*Please note: other chairs follow same assembly instructions
Left Arm
& Leg
Assembly
STEP 1
Lay out & identify all parts & hardware pieces
STEP 2
Place the seat on a clean surface with the
seating area facing up. Put the back assem-
bly between the back legs behind the seat,
aligning the predrilled holes in the legs with
the threaded inserts on the bottom of the
back assembly. Put a 2” bolt through the
legs & turn into the inserts. Semi-tighten
with the Allen wrench. Do NOT fully tighten
STEP 3
Attach the arm & leg assemblies to the chair.
Align the predrilled holes in the front leg with the
inserts in the side of the seat. Put 2” bolts through
the legs, turn into the inserts in the seat & semitighten with the Allen wrench. Please Note: There
is a right & left arm (the little brace should be on
the outside of the chair).
STEP 4
Attach the back of the arms to the back assembly.
Put a 2” bolt through the predrilled hole in the
arms & turn into the threaded insert in the side of
the back assembly. Please Note: If you have
problems aligning the holes, loosen the other bolts
& push (or pull) the back to the proper position.
You can now fully tighten all bolts with the Allen
wrench.
Loading...