CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Please make sure that you have all parts indicated before you
begin assembly of this item.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
D
E
F
G
H1
H2
H3
H4
H5
H6
H7
H8
Back
Support
Long bar
Left Side
Right Side
Front part
Seat Part
Bolt L
Bolt S
Allen Screw L
Allen Screw S
Screw L
Screw S
Bolt extra
Allenkey
M6x100
M6x70
M6x65
M6x45
M4x35
M4x15
M6x50
1 x
2 x
2 x
1 x
1 x
1 x
1 x
8 x
2 x
2 x
4 x
2 x
4 x
1 x
1 x
Product Dimension: 76.77”W x 23.23”D x 40.55”H
Weight capacity : 600 lbs.
Warning : Do not stand on the bench
Warning : Do not torque bolts / screws
PREP
ARA
TION
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included):
Allen Key
.
1
B
c
Step 1 : attach support (B) to front (F) and long
bar (C).Using screw S (H6) and tighten with the
screwdriver as shown on the picture.
3
F
2
H6
Step 2 : attach support (B) to long bar (C).Then
attach it to the back (A) as shown on the picture .
Using screw S (H6) and tighten with the screwdriver
4
.
I
H8
C
Step 3 : attach the left side (D) and the right side (E)
to the back (A) and front part (F) by using the bolt L
ighten with the Allen Key (H8) as shown on the picture(I).
T
(H1).
H8
H3 + H4
Step 4 : tighten back (A) with Allen Screw S (H4) and
screw L
key (H8). Put the seat (G) to the bench.
(H3) as shown on picture. T
C
ighten with the
Allen
Allen
5
G
H8
H2
H2
H7
H2
H7
H5
Step 5 : tighten seat (G) with bolt S (H2) and screw L
ighten Allen screw S (H4) under the seat (G) with the
T
Tighten screw L
(H5) by using the screwdriver
.
H5
H5
C
H4
(H5) as shown on the picture.
Allen Key (H8).
Loading...