ASSEMBLY AND INSTALLATION
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting Strap (A)
Mounting Screw (B)
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Outlet Box
House Grounding Wire
Hex Nut(D)
Washer(J)
Green Grounding
Screw (C)
Wire Connector (E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe(F)
Top Loop(H)
Canopy(G)
Hex Nut (D)
Canopy (G)
Washer (J)
Support Rod (M)
Installation Steps
Turn off the power at fuse or circuit box.
Wire Connector (E)
Top Loop (H)
Loop Lock (K)
Threaded Pipe (F)
Collar (I)
Chain (L)
1. Tighten the metal frame onto the fixutre body, then install the
remainder.
2. Attach the threaded pipe to the mounting strap, and then
secure it with a washer and a hex nut.
3. Attach the mounting strap to the outlet box by using two
mounting screws.
Support Rod (M)
Collar(I)
Loop Lock(K)
Chain(L)
Loop Lock(K)
Loop
Inner Arm
Holder
4.Secure the top loop to the threaded pipe.
5. Secure the tube onto the stem of the fixture, thread fixture wires
through threaded tube and end of loop first.
6. Connect the chain:
- Determine length of chain needed to achieve desired fixture height.
(To remove excess chain section, use pliers to bend link open.)
- Weave the fixture wires and fixture grounding wire through the chain,
collar and canopy.
7. Connect one end of the chain to the loop using a loop lock.
8. Connect the other end of the chain to top loop by using the other loop lock .
9. Thread the fixture wire and fixture grounding wire through the top loop,
threaded pipe and mounting strap.
Glass Shade
Bulb type A Max.
60W(not included)
10. Pull out the source wires from the outlet box. Make wire connections using wire connectors as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw, and then connect it to
the house grounding wire with a wire connector.
Carefully put the wires back into the outlet box.
O SHUT OFF
11. Attach the canopy to the mounting strap by inserting the top loop, and then secure it with the collar.
12. Attach the glass shades to the glass holders, then secure them with support rod.
13. Install 5X60W Max medium base bulbs (not included). See relamping label at socket area or packaging for maximum
allowed wattage.
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Strap (A)
Wire Connector (E)
Collar (I)
Support Rod (M)
Mounting Screw (B)
Threaded Pipe (F)
box.
Washer (J)
Green Grounding
Screw (C)
Canopy (G)
Loop Lock (K)
Hex Nut (D)
Mounting Hardware
Top Loop (H)
Chain (L)
Glass Shade
(5PC)
B
A: 26"
B: 27"
A
Loading...