S and S Global Net IPGW410 Users manual

Broadband Internet Sharing Device(IPGW410)

User Manual

S & S Global Net Inc.

Quick installation provides Quick & easy Administration for IPGW410’S Users,

If something is wrong with IPGW410’S Installation refer to User Manual.

Installation environment

 PC: IBM, Macintosh or Unix(Sun Linux) Which have a practicable Netscape

Navigator 4.0 or later, or Microsoft Internet

 Internet terminal equipment : Internet appliance (i-settop Box, IP phone etc)

with an installed ethernet terminal(10Base-T)

 ID & Password : the ID and password provided by your ISP

 Line & Modem : One external xDSL/cable modem with Ethernet terminal

(10Base-T) or a dedicated(leased) line with Ethernet terminal(10Base-T)

 CABLE : UTP Cable for connecting to another PCs

Installation Procedure

Connecting Everything Together & Booting UP (Hardware Installation)

Front of the IPGW410®

Rear of the IPGW410®

1. Connect the UTP cable from your xDSL/cable modem to the WAN port on the

rear of the IPGW410®

2. Connect the UTP cable from your PCs’ Ethernet port(LAN card) to one of the

LAN ports on the rear of the IPGW410®

3. If you need, expand your network by connecting the hub to Uplink port of the

IPGW410®

4. Connect the power adapter to the power port on the rear of the IPGW410

Configuring Your PCs to connect to the IPGW410®

(Windows95 and 98 machines)

5. In the Windows

Click the Start button, select Settings, then Control Panel and double click

the Network icon

6. In the configuration Windows

Select the TCP/IP Protocol line and click the Properties button

Notice> select the TCP/IP that has been associated with your network card or

adapter