SanDisk SDFACAMOP-1T30-SF1 User Manual

PCIe Application Acceleration

Fusion ioMemory

™

Highest Transaction Rate/GB | Optimized for Mixed Workloads | Proven Flash Memory

Model Number PX600-1000 PX600-1300 PX600-2600 PX600-5200

Usable Capacity 1,000 GB 1,300 GB 2,600 GB 5,200 GB
NAND Type MLC (Multi Level Cell) MLC (Multi Level Cell) MLC (Multi Level Cell) MLC (Multi Level Cell)
Read Bandwidth (GB/s) 2.7 2.7 2.7 2.7
Write Bandwidth (GB/s) 1.5 1.7* 2.2* 2.1*
Ran. Read IOPS (4K) 196,000 235,000 330,000 285,000
Ran. Write IOPS (4K) 330,000 375,000 385,000 385,000
Read Access Latency 92µs 92µs 92µs 92µs
Write Access Latency 15µs 15µs 15µs 15µs
Bus Interface PCI-Express 2.0 x8
Endurance (PBW) 12 16 32 64
UBER 1e-20
Weight 5.2 ounces 7.25 ounces
Form Factor Low Profile Standard Height, Half-Length
Warranty 5 years or maximum endurance used

Operating Systems

*Write BW achieved with optional high power mode. Maximum Write bandwidth performance of 1.6 GB/s achievable within 25 W power limit

Contact information

[e-mail]

SanDisk

951 SanDisk Drive
Milpitas, CA 95035-7933, USA
T: 1-800-578-6007

For more information, please visit:

www.sandisk.com/enterprise

At SanDisk, we’re expanding the possibilities of data
storage. For more than 25 years, SanDisk’s ideas
have helped transform the industry, delivering next
generation storage solutions for consumers and
businesses around the globe.

951 SanDisk Drive | Milpitas | CA 95035 | USA

Microsoft Windows: Windows Server 2012 R2, Windows Server 2012, Windows 2008 R2 SP1
Linux: RHEL 5/6; SLES 11; OEL 5/6; CentOS 5/6; Debian Squeeze; Ubuntu 12/13
UNIX: Solaris 11.1/11 x64; Solaris 10 U11 x64
Hypervisors: VMware ESXi 5.0/5.1/5.5, Windows Server 2012 with Hyper-V, Windows Server 2012 R2 with Hyper-V

Agency

US/Canada FCC Title 47, Part 15 Subpart B, Class A, CAN ICES-3 (A) NMB-3 (A)

Europe/CE

Japan/VCCI VCCI V-3/2013.04 ClassA & EN 55022 (2010) Class A, ANSI C63.4: 2009
Taiwan BSMI CNS 13438: 2006 Class A, EN 55022 (2006)A1 (2007) Class A
Australia/New Zealand AS/NZS CISPR 22: 2009 plus A1:2010
Korea MSIP-REM-FIO-ioMemoryPX600
Low Voltage Directive

Testing
RoHS DIRECTIVE 2011/65/EU
REACH Regulation (EC) No 1907/2006
WEEE Directive 2002/96/EC

EN 55022: 2010, EN 61000-3-2: 2006 plus A1:2009 & A2:2009, EN
61000-3-3: 2008, EN 55024: 2010

Directive: 2006/95/EC, EN 60950-1:2006 + A11:2009 + A1:2010 +
A12:2011 and IEC 60950-1:2005 + A1:2009

Environmental Specifications

Temperature

Power Requirements 25 W
Air Flow (LFM)
Humidity (%) Non-condensing 5 95

Altitude (ft)

Specifications subject to change without notice. Performance results are based on internal testing and use. Results and performance may vary according to
configurations and systems, including drive capacity, system architecture and applications.

1 Temperature derated 1°C per 1000 ft elevation above sea level
2 Fusion ioMemory is designed for server platforms only and relies on 300 LFM (min) airflow, which is required for normal operation in server environments.

©2014 SanDisk Corporation. All rights reserved. SanDisk is a trademark of SanDisk Corporation, registered in the United States and other countries.
Fusion ioMemory and others are trademarks of SanDisk Enterprise IP LLC. PX600_DS_SanDisk_v4 11/25/14

1

2

Operational 0°C 55°C
Non-operational -40°C 70°C

Operational -1,000 10,000
Non-operational -1,000 30,000

Min Max

300