END USER LICENSE AGREEMENT.......................................................................22
1
This chapter provides you the safety tips and cleaning
®
instructions for your SanDisk Sansa
Safety Tips & Cleaning
Instructions
Read the safety instructions carefully before using your Sansa® player.
1. Read this entire manual to ensure proper usage.
2. Keep this User’s Manual for future reference.
3. Do not use Headphones/Earphones while driving, cycling, or operating any motorized
vehicle. This may create a traffic hazard and may be illegal in some areas. It can also be
dangerous to play your music with Headphones/Earphones at high volume while walk ing,
or engaged in other activities. You should exercise extreme caution and discontinue use in
potentially hazardous situations.
4. Avoid using Headphones/Earphones at high volume. Hearing expert’s advise against
continuous loud and extended music play. Keep the volume at a moderate level, so that
you are better able to hear outside sound, and to be considerate of the people around you.
5. Keep your player away from sinks, drinks, bathtubs, showers, rain, and other sources of
moisture. Moisture can cause electric shocks with any electronic device.
6. Follow these tips to keep your player working well for a long time:
• Clean your player with a soft lint-free cloth used on glass lenses.
• Do not allow young children to use your player unsupervised.
• Never force any connector into the ports of your player or your computer. Make
sure your connectors are the identical shape and size before you connect.
• Do not disassemble, crush, short-circuit or incinerate battery as it may cause fire,
injury, burns or other hazards.
Clip player.
Disposal Instructions
Do not dispose of this device with unsorted waste. Improper disposal may be harmful to the
environment and human health. Please refer to your local waste authority for information on
return and collection systems in your area.
Safety Tips & Cleaning Instructions
2
2
This chapter helps you familiarize yourself with the
®
features and functionality of your Sansa
Sansa® Clip Overview
Congratulations on your purchase of a SanDisk Sansa® Clip MP3 player!
Sansa
microphone, a FM radio and a 1.0” display screen. You can listen to FM radio broadcast (if
applicable). Additionally, you can enjoy a built-in microphone for recording voice. The
Sansa
Features
®
Clip is a sleek and wearable MP3 player with a removable clip. It also has a built-in
®
Clip comes with a built-in rechargeable battery will last up to 15 hours.
•Digital Audio Player – supports MP3, WAV, WMA, secure WMA, and Audiobook
files.
•FM Radio (if applicable) – includes an integrated FM radio for listening to live-
broadcast FM radio programs.
• Voice Recorder – supports voice recording function with built-in microphone.
• EQ effect – you are able to select an EQ mode to personalize your music experience.
• Internal Memory – allows users to store data on the internal memory.
• Works with most subscription services using WMDRM10.
Clip player.
Minimum System Requirements
• Windows XP SP2
• Windows Media Player v10
• Intel Pentium class PC or higher
• CD-ROM drive
• USB 2.0 port for hi-speed transfers and charging
Sansa® Clip Overview
3
Package Contents
Please unpack your Sansa® Clip and check that the following were included:
• Sansa
• Earphones
• USB 2.0 Cable
• Quick Start Guide
Sansa® Clip at a Glance
®
Clip player
1 Display window Display the information and status here
2 Left/Previous/Rewind Press for previous track, rewind, or move left
3 Select Button Press to select the item
4 Down/Submenu Press to move down or to options menu
5 Right/Forward Press for next track, fast forward, or move right
6 Up/Pause/Resume Press to move up one item, pause, or resume
7 Menu Return to the Main Menu
8 MIC Built-in microphone
9 Earphone Port Connect earphones here to listen
10 Volume Up Turns up the volume
11 Volume Down Turns down the volume
12 Hold/Lock
Factory sets to locked position (shows orange color). Slide to
center position for controls. When locked, all controls are
disabled to prevent accidental activation of controls.
13 Power/Reset• Slide up to turn on the player
Sansa® Clip Overview
4
• Slide up and hold for 2 seconds to turn off the player
• Slide up and hold for 15 seconds to reset your player
14 USB Port Plug USB cable here to connect to the computer
15 Clip The removable clip accessory
Hold Switch
The Hold Switch is located on the left side of the player, and is used to prevent any
accidental operation. All function keys will be disabled once the Hold Switch is moved to the
lock position (Orange Color visible). All the buttons on the Sansa
when the Hold Switch is active (Orange Color visible).
The following message will appear on the display screen if any buttons is pressed while the
device is in the Locked position. The music should continue to play even
locked.
®
Clip will not operate
if the device is
Main Menu Options
Music – browse and listen to music, audio
books, or recordings
Voice – record voice using built-in
microphone
Playback Screen
Radio (if applicable) – listen to FM broadcast
radio and save presets
Settings – view or customize the Sansa
player features
Sansa® Clip Overview
5
1 Shuffle Indicate that the Shuffle function is enabled
2 Repeat Indicate that the Repeat function is enabled
3 Current/Total Tracks
4 Battery Indicator Display the battery status
5 Artist Name Display the artist name
6 Title/Album Display the song title and album name
7 Play Time Display the elapsed time
8 Progress Bar Display the progress of the current track
9 Play/Pause Display the music or recording files playback status
Display the current track number and the total number of
tracks
Battery
The Sansa® Clip player comes with an internal rechargeable battery. To use the player for
the very first time, remember to fully charge the battery. You can charge your Sansa
player through the USB port of your computer, a car adapter (not included) USB port, or AC
adapter (not included) USB port.
Charging
To charge the battery, please follow these steps:
1. Connect the larger end of the USB cable into an available USB port on the
computer.
2. Connect the smaller end of the USB cable into the Sansa
3. The computer must be on for most USB ports to charge your battery. Your
Sansa
The battery level indicator will blink while charging. You will not be able to
play while connected to the computer USB.
4. To stop recharging, simply disconnect the cable.
The battery can also be charged using an AC adapter (not included) or a car adapter
(not included) and you will be able to play your device while charging with one of the
adapters.
®
will show connected and the yellow charging indicator w ill appear.
®
Clip player.
®
NOTE: Some low-power USB ports maynotbe able to provide enough charge
power. Also note that the rechargeable batteries are not replaceable.
Sansa® Clip Overview
6
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.