Sandia 80-2500, 80-3500, 80-2500-H, 80-3500-H Safety, Operation And Maintenance Manual With Parts List
Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
500 PSI, Dual 2-Stage and 3-Stage MotoRS
Heated and Non-Heated Units
SNIPER 12-Gallon Carpet Extractor
Heated and Non-Heated Units
Copyright © 2016 Ultimate Solutions | Sandia Products
ACTIVATE
YOUR
WARRANTY!
Important Information and Safety Instructions
Register your Machine Online or Return your Machine Warranty Card!
Serial No:
Another Innovative
Product from
Manufactured with
Pride in the U.S.A.
Make a copy of this card for future reference.
Copyright © 2016 Ultimate Solutions | Sandia Products. All Rights Reserved.
Ultimate Solutions Corporate Oce
15571 Container Lane, Huntington Beach, CA 92649
Phone: 800-983-5834 | Fax: 714-901-8404
www.us-group.com | www.sandiaplastics.com
New Equipment Warranty
Limited Warranty
Sandia Products warrants new equipment against defects in material and
workmanship under normal use and service to the original purchaser. Any statutory
implied warranties, including any warranty of merchantability or tness for a
particular purpose, are expressly limited to the duration of this written warranty.
Sandia Products will not be liable for any other damages, including but not limited
to indirect or special consequential damages arising out of or in connection with the
furnishing, performance, use or inability to use the machine. This remedy shall be the
exclusive remedy of the purchaser. The warranty period is subject to the conditions
stated below.
Lifetime Warranty on Body, 2-Years on Vacuum Motors, 1-Year on
500 PSI Pump, 90-Days on Tools and Accessories
Sandia Products warrants the roto-molded body to be free from defects in material
and workmanship, under normal use and service for a lifetime. Sandia Products
warrants the motors to be free from defects in material and workmanship, under
normal use and service for two (2) years from the original date of sale and the pump
and the electrical parts for one (1) year. Parts replaced or repaired under this warranty
are warranted for the remainder of the original warranty period. Service labor
charges are covered for one (1) year from the date of purchase, when performed by
a manufacturer-authorized service provider.
Labor is only provided by authorized service centers. If an authorized service
center is not near you, it is the purchaser’s responsibility to take their machine to an
authorized service center.
Normal wear items such as capacitors, cords, nishes or switches will be warranted
for manufacturing defects for ninety (90) days from the purchase date.
All warranties of motors and associated components will be voided: if the machine
is serviced by anyone other than an authorized service provider; if the machine is
mechanically modied; if the machine is operated when not operating properly; or if
the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from Sandia
Products subject to proof of purchase. The Machine Registration Card must be
completed and returned immediately at the time of purchase. Registration may
also be performed online at: www.sandiaplastics.com/registration.aspx. If proof of
purchase cannot be identied, the warranty start date is ninety (90) days after the
inventory stocking date at the distributor’s warehouse.
Models:
80-2500
80-2500-H
80-3500
80-3500-H
(2) Sniper 12-Gallon, 500 PSI Carpet Extractor
Dear Valued Client,
Congratulations on the purchase of your 12-Gallon Carpet Extractor! The world of
carpet cleaning is becoming more high-tech and competitive and we strive to provide
you with the most innovative products. Our Carpet Extractor is yet another example of
this, bringing a new dimension to restoration and carpet cleaning.
Please review this manual, paying careful attention to the Safety Instructions Section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will void
your warranty. You can be condent that simple maintenance will ensure that your
Carpet Extractor provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering
parts, please call an authorized distributor.
Before you begin using your Carpet Extractor, thoroughly review the Owner’s Manual.
Again, congratulations on the purchase of your 12-Gallon Carpet Extractor!
Equipment Videos
Machine Training: www.sandiaplastics.com/equipmentVideos.aspx
Machine Features and Benets:
www.sandiaplastics.com/featuresVideos.aspx
Questions or Comments?
Phone: 714-901-8400
Toll Free: 800-983-5834
Fax: 714-901-8404
Ultimate Solutions Corporate Oces:
15571 Container Lane, Huntington Beach, CA 92649
Visit our website at: www.sandiaplastics.com
Register your machine online at: www.sandiaplastics.com/registration.aspx
Mail to:
Ultimate Solutions Corporate Oces
15571 Container Lane
Huntington Beach, CA 92649
See reverse side for Warranty Information.
Make a copy of this card for future reference.
Copyright © 2016 Ultimate Solutions | Sandia Products. All Rights Reserved.
ACTIVATE YOUR WARRANTY!
Please take a moment to register your machine. Fill out the
information below and mail back to Sandia Products immediately.
The warranty starts on the purchase date by the original purchaser subject to proof
of purchase. This Machine Registration Card must be completed and returned
immediately at the time of purchase. If proof of purchase cannot be identied,
the warranty start date is ninety (90) days after the inventory stocking date at the
distributor’s warehouse.
Your machine may also be registered online at:
www.sandiaplastics.com/registration.aspx
Machine Model Purchase Date
Motor Type Serial No.
Place of Purchase
Shipped To
Your Name Phone
E-mail Fax
Address Line 1
Address Line 2
City State Zip
Comments:
Sniper 12-Gallon, 500 PSI Carpet Extractor (3)
Table of Contents
Returned Material Authorization (RMA) Procedure ......................................................................3
New Equipment Warranty ......................................................................................................................4
1.0 Safety Instructions ............................................................................................................................5
2.0 Grounding Instructions ...................................................................................................................6
3.0 Care of your Carpet Extractor .......................................................................................................7
4.0 Set-Up and Operation .....................................................................................................................7
5.0 Maintenance .......................................................................................................................................8
6.0 Shutdown Procedures .................................................................................................................. 12
7.0 Storing your Carpet Extractor .................................................................................................... 13
8.0 Trouble Shooting Guide .............................................................................................................. 14
9.0 Machine Wiring Diagrams ........................................................................................................... 15
10.0 Machine Schematic Drawing - No Heater ........................................................................... 16
11.0 Machine Parts List - No Heater ................................................................................................ 17
12.0 Machine Schematic Drawing - Heated Unit ....................................................................... 19
13.0 Machine Parts List - Heated Unit ............................................................................................ 20
Please ll out the following information:
Model No:
Serial No:
Distributor Name:
Distributor Phone No:
Date of Purchase:
Sniper 12-Gallon Carpet Extractor
By Ultimate Solutions | Sandia Products
Copyright © 2016 Ultimate Solutions | Sandia Products
Ultimate Solutions
Our Family of Companies
TOGETHER WE’RE BETTER!
Ultimate Carpet Solutions
www.sandiaplastics.com
Ultimate Hard Floor Solutions
www.mercuryoormachines.com
Ultimate Cleaning Solutions
www.ultimatesolutionsinc.net
(4) Sniper 12-Gallon, 500 PSI Carpet Extractor Sniper 12-Gallon, 500 PSI Carpet Extractor (21)
New Equipment Warranty
Lifetime on body, 2-years on vacuum motors, 1-year on 500 PSI pump and all electrical
components, 90-days on tools and accessories.
Warranty Policy
All equipment is inspected and tested before shipping from the manufacturer. All parts are
warranted to be new and free from defects in workmanship and material, under normal use to the
original retail purchaser. This warranty limits manufacturer’s liability for defects in workmanship
or materials for replacement of defective parts only. The manufacturer accepts no liability for
incidental or consequential damages arisen from the use of any equipment, defective or not. This
warranty is in lieu of all expressed or implied warranties and is extended only to the original retail
purchaser. Manufacturer sales and service representatives are not authorized to waive or alter
the terms of this warranty, or to increase the obligations of the manufacturer under the warranty.
Parts replaced or repaired under this warranty are warranted for the remainder of the original
warranty period.
Labor is only provided by authorized service centers. If an authorized service center is not near
you, it is the purchaser’s responsibility to take their machine to an authorized service center.
The manufacturer covers up to one (1) year (365 days) of service labor at the manufacturer’s
calculated hourly labor rate/repair time when performed by a manufacturer-authorized service
provider. Ultimately, labor reimbursement costs are at the discretion of the manufacturer. At no
time is the manufacturer responsible for travel time to complete on-call repairs. After one (1) year,
the original retail purchaser is responsible for all labor costs with no manufacturer reimbursement.
The original purchaser must contact the manufacturer to follow correct RMA/warranty procedures.
They must include a copy of the RMA Sheet enclosed in the box with the returned item. No returns
shall be authorized unless the proper RMA procedures are followed. It is the responsibility of the
distributor to repair the client’s equipment as soon as possible.
The manufacturer charges a 25% restocking fee for any items that are being returned to stock.
Items must be new, unused, free of damage and are only good for up to 30 days. After 30 days, the
manufacturer does not accept the return of any items for a store credit.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of
any other parts will void warranty. The manufacturer does not reimburse for parts used by client
that were not supplied directly for the machine under warranty.
The client must contact the manufacturer prior to working on or changing out of any parts, etc.
The manufacturer must issue an RMA Sheet containing approved labor time and replacement
parts. Do not send parts or equipment back to the manufacturer without an RMA Number and
approval. No labor will be paid for, nor parts cost paid for or reimbursed, that have not previously
been approved by the manufacturer. All warranty work must be approved and authorized to
qualify, and appropriate warranty procedures must be followed.
The warranty starts on the purchase date by the original purchaser from an authorized distributor,
subject to proof of purchase. The Machine Registration Form must be completed and sent to
the original manufacturer at the time of purchase. If proof of purchase cannot be identied, the
warranty start date is ninety (90) days after the date of sale to an authorized distributor.
Activate your Warranty: www.sandiaplastics.com/registration.aspx
13.0 Machine Parts List – Heated Unit Continued
Drawing No. Item ID Item Description Qty.
50
10-0835-N Nut for Pump Bolt on Extractor 8.00
51 10-0808 Caster 2.00
52 10-0816 Caster Bolt 1/4-20 x 1/2 Hex Bolt 12.00
53 80-0040 3000 PSI Hose for Inside Extractor 4.75
54 80-0040 3000 PSI Hose for Inside Extractor 4.75
55 80-0040 3000 PSI Hose for Inside Extractor 4.75
56
10-0835-N Nut for Pump Bolt on Extractor 4.00
57 Pump Fitting Part of 80-0016 Pump 1.00
58 Pump Fitting Part of 80-0016 Pump 1.00
59 80-0015 500 PSI Pump Mount Plate 1.00
60 10-0833 Motor Manifold Bolts 4.00
61 Pump Hose A
Part of 80-0016 Pump 1.00
62 Pump Fitting
Part of 80-0016 Pump 1.00
63 Pump Hose B
Part of 80-0016 Pump 4.00
64 10-0881
1/4” MNPT x 3/8” JIC 90 Degree 1.00
65 80-0016 500 PSI Pump 4.00
66 10-0835-B Pump Bolt 200 PSI Extractor 4.00
67 10-0400-D Keeper for Extractor Latch 1.00
68 10-0832 S/R Strap Bolts 4.00
69 10-0843 3/8” Black Hose 6.00
70 80-0019 1/4 MNPT x 1/2 BARB 90 Degree 1.00
71 80-0017 Bulk Head Fitting 3.00
72 10-0379 8-32 x 3/8 Screw 8.00
73 10-0400-C Latch 1.00
74 10-0868 1/4” Female QD 1.00
75 10-0831 S/R Bracket 2.00
76 10-0801-I 90 FPT 1.00
77 10-0878-B 1/4” MPT x 3/8” MJIC 1.00
78
10-0814-B Manual Sensor for Heater 2.00
79 10-0852 1/4” 90 Degree Brass Elbow 1.00
80 10-1500-A Heater Element 1000 Watt 2.00
81 10-0814 Sensor for Extractor Heater 4.00
82 10-0921 Aluminum Box for Dual Rod Heater 1.00
83 10-0901-A 600 PSI Relief Valve for Heater 1.00
84 10-0920 Dual Rod SS Heat Exchanger Tube 1.00
Not Shown 80-0280-C2100H/3100H Extractor Wiring Harness 1.00
Loading...