Sandia 3-Gallon Spot Extractor User Manual
3-Gallon Spot-XTract
By Sandia Products
Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
Please ll out the following information:
Model No:
Serial No:
Distributor Name:
Distributor Phone No:
Date of Purchase:
100 CFM, 804 Watt Motor
REGISTER
YOUR
MACHINE
ONLINE!
3-Gallon Spot-XTract
Model No. 50-1002
15571 Container Lane, Huntington Beach, CA 92649
Phone: 714-901-8400 | Toll Free: 800-983-5834 | Fax: 714-901-8404
info@sandiaplastics.com | www.sandiaplastics.com
© 2012 Copy Rights Reserved Sandia Products, Inc.
Important Information and Safety Instructions
Register your Machine at www.sandiaplastics.com/registration.aspx
Serial No:
© 2012 Copy Rights Reserved Sandia Products, Inc.
Reliable Power
Fastest Pick-Up
Safe & Easy to Use
Innovative Design
Super Lightweight
Patented Features
Dear Valued Customer,
Congratulations on the purchase of your 3-Gallon Spot Extractor carpet and upholstery
machine! The world of carpet cleaning is becoming more high-tech and competitive and
we strive to provide you with the most innovative products. Our Spot Extractor is yet
another example of this, bringing a new dimension to carpet and upholstery cleaning with
its cutting-edge features, quality and value.
Please review this manual, paying careful attention to the Safety Instructions section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will void
your warranty. You can be condent that simple maintenance will ensure that your Spot
Extractor provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering parts,
please call an authorized distributor.
Before you begin using your Spot Extractor, thoroughly review the Owner’s Manual.
Again, congratulations on the purchase of your 3-Gallon Spot Extractor carpet and
upholstery machine!
8.0 Machine Parts List
Drawing No. Item ID Item Description Qty. Needed
1 SP-3-ST-BLKGRAN Black Granite 3-Gallon Solution Tank 1.00
2 SP-3-R-GRYGRAN Grey Granite 3-Gallon Recovery Tank 1.00
3 10-0383 6-32 x 1/4” Phil Pan Screw 6.00
4 10-0400-D Latch for Sniper 1.00
5 10-0412 C-Channel for Spotter Handle 2.00
6 10-0414 Rivet for Spotter Handle 4.00
7 10-0384 .125 Thick Nylon Washer 4.00
8 10-0385 .06 Thick Nylon Washer 4.00
9 10-0074 Flat Washer #8 SAE 5.00
10 10-0216 Allen Head Screw for Backpack 4.00
11 10-0379 8-32 x 3/8” Screw 4.00
12 10-0405 1-1/2” PVC SCH40 Slip Thread 1.00
13 10-0302-A Hatch Cover Gasket for Spotter 1.00
14 10-0416-A 1-1/2” Black ABS Stand Pipe 0.60
15 10-0304 Spotter Cap and Float Assembly 1.00
16 10-0419 Screw for Spotter Hatch 6.00
17 SP-3-H-BLK 3-Gallon Spotter Black Handle 1.00
18 10-0406 Nylon Barb 90 1/8” NPT 1/4” 2.00
19 80-0017-2 Bulk Head tting for Spotter 1.00
20 10-0403 1/8” Brass Female Coupler 1.00
21 10-0402 1/8” Male QD 1.00
22 10-0434 Threaded Hose for Spotter 2.50
23 10-0407 1/8” Strait Nylon Barb NPT 4.00
24 10-0845-2 1/8” Strainer for Spotter 1.00
25 10-0300 55 psi Pump for Spotter 1.00
26 10-0301 L Bracket for Spotter 1.00
27 10-0435 Oetiker Clamp 4.00
28 10-0303 Roller Blade Wheel for Spotter 2.00
29 10-0387 5/16” x 1” Spotter Wheel Bolt 2.00
30 10-0022 Shoulder and Waist Belt Screw 1.00
31 10-0017 Deector Screw 1.00
32 10-1028 Bottom Base Plate for Spotter 1.00
33 10-0492 Screw for Plates on Spotter 2.00
34 10-0014 Motor Screw 2.00
35 10-0380 10-32 x 3/8” Screw 2.00
36 10-1024 Motor Mount Plate for Spotter 1.00
37 10-0354 3-Gallon Spotter Motor 1.00
38 10-0386 Stamped Motor Screen 1.00
39 10-1030 Spotter Motor Gasket 1.00
40 10-0027-A Strain Relief Nut 1.00
41 10-1026 Switch Plate for 3-Gallon w/ Heat 1.00
42 10-0027 Pigtail Strain Relief 1.00
43 10-0448 20-Foot Spotter Cord 1.00
44 10-0025 On/Off Switch 2.00
45 10-0400-C Keeper Latch for Spotter 1.00
(2) 3-Gallon Spot Extractor 3-Gallon Spot Extractor (11)
Loading...