Sanan SA-1844P, SA-1563P User Manual

Ultra Wide Dynamic Camera

User's Manual

(IR Waterproof)

SA series Ultra

1.Overview

WDR cameras are new, CCTV cameras which adopt Pixim's

innovative “SEAWOLF” image sensor chip based on Digital Pixel System ®

technology. The resolution is up to 690TVL-E and the industry-leading wide

dynamic range is up to 120dB. This WDR ensures brilliant image quality under any

lighting environment. The image and color quality is also excellent in low

illumination environments. This camera series is a ultra wide dynamic range camera

in the real sense using digital sampling which can't be paralleled by average wide

dynamic range cameras using older generation CCD imagers. The application of 3D

digital noise reduction technology ensures higher S/N, which efficiently reduces the

digital storage and transmission data saving system cost. Fashionable and

professional exterior design and special all-in-one all directional bracket, makes

round-the-clock surveillance easy and convenient.

A C DB

2.Notice

1. Use the appropriate power supply

The input power will be DC12V. Be sure to connect it to theappropriate power.

Wrong connection may cause malfunction and/or damage tothe camera.

2. Do not attempt to disassemble the camera.

To avoid electric shock, do not remove screws or camera housing. There are no

user serviceable parts inside. Ask a qualified service person for servicing.

3. Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged

by improper handling or storage.

4. Do note use strong or abrasive detergents when cleaning the camera body.

Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to remove,

use a mild detergent and wipe gently.

5.Do not attempt to aim the camera at the sun.

Do not attempt to aim the camera at the sun or other extremely bright objects that

cause smear to appear irrespective of whether the camera is operating or not. This

could damage the .DPS Sensor

3.Features

Ultra Wide Dynamic Range

The captured wide dynamic range is 102dB typical and can reach 120dB maximum.

OSD Menu*

Powerful OSD menu operation function, allows for setting of various paramters and
pre-sets.

Comparison of Wide Dynamic Range camera and average camera

Average camera with BLC off Average camera with BLC on Ultra Wide Dynamic Range camera

All directional bracket

All directional bracket, easy control.

Notice the function with * ,different type different function.

High Effective Resolution

Image resolution as high as 690TVL-E, offering enhanced horizontal and vertical
resolution useable in existing as well as new CCTV systems.

Lower Illumination Working Capability

0.1Lux low illumination (IR OFF)

Long-effective IR Light Source Design

IR Sensnsitivity

1yr 2yr 3yr 4yr

Service Life

Other brands

3D Noise Eliminating Technology

Adopts Pixim fully digitalized 3D noise reduction technology to minimize noise,
extending DVR storage by 30%+.

Long-life IR Light Source Design

Adopts high performance IR LED and heat
balance design, effectively extends the service
life of LED.

This camera adopts innovative DPS(Digital Pixel System) image sensor and image
processing technology. The sensor picks up details from each pixel based on
hundreds of samples per video frame. vs CCD's limited exposures, to ensure wider
dynamic range than is possible with analog CCD. The image quality is even
brilliant under extreme lighting conditions.changeable lighting condition.

SEAWOLF Image Sensor

*

120mm

80.0mm

9.0mm

1 Subpanle 2 Base
3 Dome Body 4 Video Line
5 Power Line 6 Base Screw Hole

1 Use screws to fix the bracket to the wall where camera should be installed.

2 Loose horizontally adjusting screws and vertically adjustingscrews to adjust the

camera to an angle you need.Tighten the screws.

3 Use FOCUSor ZOOM Button to set the focal length .

4 Use MENU button to change menu settings.

Dimensions (Unit: mm)

1 Sun Shade Cover 2 IR LEDS 3 Lens
4 Horizontally Adjusting Screws 5 Vertically Adjusting Screws
6 Bracket Installing Screw Hole 7 Bracket 8 Menu Button

5.Dimentions (Unit: mm)

Camera Installation

Camera Installation

4.Parts Instruction

Parts Instructions

A

C

94.0mm

70.0mm

5.0mm

11

22

33

44

55

66

66

88

1 Subpanel 2 Base
3 Dome Body 4 Video Line
5 Power Line 6 Zoom
7 Focus 8 Base Screw Hole

B

1 Please use the allen wrench in the accessory bag to loose the fixed screws in the subpanel.
2 Seperate the base from the subpanel.
3 Fix the base to the position you need with screws.
4 Then put the dome body and subpanelin place and tighten the screws.
5 Adjust Lens focal length(SW-515).

11

22

33

44

55

77

11

22

33

44

55

66 77

Vertically Rotation 50

Horizontally Rotation 355

Menu

Right

Left

Up

Down

88

A

B

C

1.Select the place where camera needs to be installed, use screws to fix bracket sub

panel.

2.Loose the horizontal and vertical screws, adjust the angle, then screw

down the screws.

Dimension(Unit: mm)

1 Sun Shade Cover 2 IR LEDs 3 Lens
4 Vertically Adjusting Screw 5 Level Adjustment Circle 6 Bracekt

Camera Installation

Parts Instructions

D

11

22

33

44

55

6 6

Vertically Rotation180

D

165

70

66

81

Horizontally Rotation355

OSD Menu Setup

Menu button for choice

Move Up And Down By Up And Down Button
Move Horizontally Or Modify Parameter By

Left And Right Button

6. OSD Menu Operation

Menu

Right

Left

Up

Down

ATW

MEDIUM

OFF

NORMAL

OFF

DC

AUTO

ENGLISH

DEFAULT

WDR CONTROL

BLC
WHITE BALANCE

LENS SELECT

D/N CONTROL

LANGAGE SELECT

AGC

FLUORESCENT

SAVE

(ATW/AWB)

(LOW/NORMAL/MEDIUM/HIGH)
(OFF/ON)

(LOW/NORMAL/HIGH)

(OFF/CRR/CRR2)

(MANUAL/DC)

(OFF/AUTO/GPIO)

(ENGLISH/CHINESE)

(CANCEL)

CAMERA SETUP

WD NROMAL

SAVE

PRESETS
PRE

WDR ZONE SELECT:

NORMAL METER PRESETS

WD NROMAL/SAFE AREA/ATM/LOW 1/3

CANCEL

*Specialists press "Left, Right, Left, Right, Down" button enter superior menu.

WDR Control:

Press Enter to show the menu, move the cursor to WDR Control, set MEDIUM,

NORMAL, LOW, HIGH by left and right button; choose the setting for WDR in

accordance with the lighting condition, set High in strong lighting contrast to realize

higher quality image.

WDR ZONE SELECT:WD NROMAL/SAFE AREA/ATM/LOW 1/3.

BLC:

move to BLC by Up and Down button, set BLC by Left and Right button: On and Off.

WHITE BALANCE:

Move to White Balance by Up and Down button, set White balance by Left and Right

button: AWB: Auto White Balance; ATW: Auto Tracking White Balance. The color's

temperature are different in different lighting condition, The color's temperature

changes in different lighting condition, so the white color in video image changes if

the lighting condition changes. AWB means cameras can compensate color

temperature automatically. In some special environment, in order to keep the same

color temperature , ATW setting can keep a fixed color temperature

AGC:

Move cursor to AGC by Up and Down button, set AGC by Left and Right Button as :

NORMAL, LOW and HIGH. Setting AGC is better for cameras to work in wider

lighting range, if the illumination is low, can set AGC high to rise the sensitivity of

cameras.

LENS SELECT:

Move cursor to LENS SELECT, set LENS SELECT by Right and Left button as :

MANUAL,DC:DC Automatically. MANUAL FOR MANUAL IRIS LENS, DC for

AUTO IRIS LENS.

FLUORESCENT:

Move cursor to FLUORESCENT by Up and Down button, set by Left and Right button

as: OFF, CRR2: Color Rolling Restrain. Cameras output color rolling image under

fluorescent lamp, CRR can restrain colorrolling, keep the image stable.

D/N Control:

Move cursor to D/N Control by Up and Down button, set D/N by Left and Right button

as: OFF; Auto;GPIO: External Control; On. The illumination is very low at night, so

we need to rise the sensitivity and improveimaging quality, then we can get better

image quality. Set D/N in accordance with different actual need.

SAVE&EXIT:

Move cursor to SAVE&EXIT by Up and Down button, set by Left and Right button

as : SAVE&EXIT;DEFAULT,CANCEL.

LANGAGE SELECT:

Move cursor to LANGAGE SELECT by Up and Down button, set by Left and Right

button as : ENGLISH;CHINESE.

D

C

B

A

Specifications

165( L)*81(H)*66(W)

228(L) * 182(H) * 88(W)

7 Specifications

120( L)*80(H)

1000g

*Specifications subject to change without notice. SW-512 without menu function;SW-515's menu function is
optional)

3.6 or 6mm

94(L) * 70(H)

570g

Model

Sensor

Video Format

SYNC Mode

Resolution

S/N Ratio

Mini illumination

AGC

White
Balance

BLC

WDR control

Voltage

Current

Lens

Working Temperature

IR Range

Size

Weight

Mode

Range

1/3 DPS Sensor

PAL/NTSC

INTERNAL

690HTVL-E

normal, low, high

ON, OFF

medium, normal, low, high

DC12V

>50dB AGC OFF

Automatic Tracking White Balance (ATW)

(Auto White Balance)

2200~10000 K

-10 C ~50 C

D/N

OFF, External Control, Auto; ON

Sensor

Menu Control

Power

<250mA

30m

<350mA

0Lux ;(IR-ON )

4-9mm Auto iris

20m

500g

3.6 or 6mm

1200g

Model

Sensor

Video Format

SYNC Mode

Resolution

S/N Ratio

Mini illumination

AGC

White

Balance

BLC

WDR control

Voltage

Current

Lens

Working Temperature

IR Range

Size

Weight

Mode

Range

1/3 DPS Sensor

PAL/NTSC

INTERNAL

690HTVL-E

normal, low, high

ON, OFF

medium, normal, low, high

DC12V

>50dB AGC OFF

Automatic Tracking White Balance (ATW)

(Auto White Balance)

2200~10000 K

-10 C ~50 C

D/N

OFF, External Control, Auto; ON

Sensor

Menu Control

Power

<400mA

30m

<250mA

0Lux ;(IR-ON )

4-9mm Auto iris

40m

*Specifications subject to change without notice. SW-34 without menu function)