Samsung Electro Mechanics ST GM42003N User Manual

Samsung Electro

CUSTOMER APPROVAL SHEET

Company Name

APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver.

CUSTOMER REMARK :

Issued By

IH Jo

Maetan

S-

TAG Datasheet(ST

Proprietary and Confidential

00

1.

Approved By

eon

-GM42003N)

MODEL

ST-GM42

3N

CUSTOMER

APPROVAL

□ □

Checked By

YB Lee JG Ryu

0 )

Samsung Electro-Mechanics

150, Maeyoung-ro(

REV 1.0

3-Dong), YoungTong-Gu, Suwon, Gy

Tel : 82-31-210-5114

-Mechanics

ggi-Do, Korea

1/21

Samsung Electro

Datasheet

Label (Electronic Label System)

general performance and specification

based on

S-

TAG Datasheet(ST

Proprietary and Confidential

for

The names of actual companies and products mentioned herein

may be the trademarks of their respective own

No part of this document may be reproduced, stored in a

retrieval system, or transmitted in any form or by any means

without the express written consent of Samsung Electro

This document is subject to change without notice.

-GM42003N)

S-TAG

S-

REV 1.0

Samsung Electro-Mechanics

2015-06-30

Summary

This datasheet presents the

Shelf Label) system, which is

IEEE 802.15.4.

s of S-Tag

S-Label ESL (Electronic

REV 1.0

Mechanics.

-Mechanics

ers.

-

2/21

Samsung Electro

................................

PECIFICATION

................................

PLAY

................................

CAUTIONS FOR TREATME

................................

TAG Datasheet(ST

Proprietary and Confidential

................................

Table of Contents

S-

-GM42003N)

1 GENERAL DESCRIPTION

1.1

F

1.2

1.3

EATURES

T

YPICAL APPLICATIONS

A

PPEARANCE

2 SPECIFICATION

2.1

P

RODUCT SPECIFICATION

2.2

R

ADIO

(RF) S

2.3

NFC S

PECIFICATION

2.4

M

2.5

2.6

ECHANICAL DRAWING

L

ABELS

B

ARCODE SCANNING

3 OPERATION TEST

4 ESL OPERATION BY DIS

................................................................

................................

................................................................

................................

..... 5

......................... 6

......... 6

...................... 6

.................. 7

....... 7

... 7

............. 8

......... 8

............................ 10

............ 12

.............. 13

........................... 15

5 PACKAGE

6

6.1

U

SAGE ENVIRONMENT

6.2

S

TORAGE AND USE

6.3

B

ATTERY REPLACEMENT

6.4

FCC

REV 1.0

................................

NT................................

................................

-Mechanics

........................... 18

............................. 19

.......... 19

.............. 19

........ 20

............................... 21

3/21

Samsung Electro

Initial release

TAG Datasheet(ST

Proprietary and Confidential

Document History

S-

-GM42003N)

Rev. Date

1.0 30 Jun15

Revision history

Page

-

REV 1.0

-Mechanics

4/21

Samsung Electro

Description

product is a part of

, Remote controller

displays price and other product information on

paper in places like retail markets.

receives product price/information updates from

is the product based on IEEE standard 802.15.4 for low power wirele

consists of RF transceiver, RF circuitry and

802.15.4 based network protocol and MAC protocol and other peripheral devices.

TAG Datasheet(ST

Proprietary and Confidential

Label (Electronic Shelf Label) system as well as S

Label system make up a system that electronically

Tags, which has been traditionally printed

changes

ARM Cortex M3

1

General

S-

-GM42003N)

This S-Tag

Gateway (S-Gate)

S-Tag

and other information.

S-Tag

applications. S-Tag

Samsung S-

(S-RC). S-

S-

S-Gate and updates or

-Label

or written on

its display of price

ss communication

MCU offering IEEE

Figure 1 ESL System

REV 1.0

-Mechanics

5/21

Samsung Electro

isplay

Display Color : Black, White

400

Communication : Wireless communication based on IEEE 802.15.4

Operating on 2.4GHz Un

Low Power Consumption

Wakeup

3

Working condition: Indoor where wireless communication is availabl

NFC(13.56MHz) Available

Applications

Retail industry with electronic display

Intelligently communicating, managing, and optimizing price and product informations.

TAG Datasheet(ST

Proprietary and Confidential

(2405 ~ 2480 MHz)

.

1.1 Features

-

Display : E-Paper D

S-

(EPD) (active type) (84.80 x 63.60 mm)

-GM42003N)

-

Display Resolution :

-

External Wakeup : RF

-

Outline Dimension : 10

-

Case Color : White

-

1.2 Typical

-

x 300 pixel (120dpi)

licensed ISM band for ZigBee

(using ISM Band[2.4GHz])

.5 mm x 87.5 mm x 14.5 mm

s, platforms, solutions and services

e.

1.3 Appearance

REV 1.0

Figure 2 Appearance

-Mechanics

6/21

Samsung Electro

Specification

Item

Size

Housing Color

Information display

Communication

Distance

Etc.

Specification

Transmit Power

Error Vector Magnitude

Tx Current

RX Receiver Sensitivity

TAG Datasheet(ST

Proprietary and Confidential

Description

103.5 mm

x 87.5 mm

x 1

4.5 mm

CR2450 Lithium Battery (3V,

3

PCS)

Electrical paper display (

active type

) (

84.80

x

63.60

White

Price, Unit,

Symbol

etc.

Wireless communication based on IEEE 802.15.4

Radius

20m ( Line of Sight)

No additional anti

-

theft locking structure : Rail Mounted only

SPEC

Condition

Min Typ Max

-

0.5 2.5 5

dBm

- 10 30 % When measured for 100

- 35 mA

Total current at max Tx Power

-90 - - dBm PER <

mm)

(2405 ~ 2480 MHz)

chips

1%

2 Specification

2.1

Product

S-

-GM42003N)

Battery

Display

Operation Temp.

2.2

Radio (RF)1

Item

Parameter

2.4 ~ 3.3Vdc (condition : In active status)

Display Resolution : 400 x 300 pixel

0 ~ 40 ℃ (@20~60% RH)

Unit

TX

1

Test Channel : 2480MHz

REV 1.0

-Mechanics

7/21

Samsung Electro

NFC Specification

Read/Write Distance

nical Drawing

TAG Datasheet(ST

Proprietary and Confidential

Condition

PCB status

TAG

2.3

S-

-GM42003N)

Items

NFC

2.4

Mecha

Parameter

2.4.1 Case Dimension

spec.

Min Typ Max

- 40 - mm

- 30 - mm

Units

status

REV 1.0

-Mechanics

8/21

Samsung Electro

TAG Datasheet(ST

Proprietary and Confidential

2.4.2 Exploded View

S-

Figure 3 Mechanical Dimension

-GM42003N)

REV 1.0

Figure 4 Exploded View

-Mechanics

9/21

Samsung Electro

nformation

Serial 1, 2 Code Value

G

③

Year : Last two digits of manufacturing year.

xample : 201

Month : Manufacturing m

②

(1 ~ 9, X(10), Y(11), Z(12))

Date : Manufacturing da

③

(1 ~ 9, A(10) ~ V(31))

Vendor : Manufacturing

④

: SEMTHAI, T : TSEM, etc

Line number : Manufactu

⑤

Revision : Product revisio

⑥

A : First, B : Second, C : Third, etc

: Last 3 characters

TAG Datasheet(ST

Proprietary and Confidential

2.5

Labels

S-

-GM42003N)

2.5.1 Serial Number I

14 3

①

(00 ~ 99, E

(S

②

S A A 2JW

④

⑤

⑥

⑦

4 is '14')

ndor

)

('A', 'B', 'C', etc)

(

ZigBee IC Lot Number⑦

REV 1.0

-Mechanics

)

10/21

Samsung Electro

Mac Label Drawi

Product information is indicated in a printed sticker label. The information consists of MODEL (model

name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark,

GM4200

42

MFD : (Month).(Date).(Year)

Serial Number Information

barcode number(hexadecimal 1

8 digits(1st ~ 8th)

2 digits(9th ~ 10th) :

1 digit(11th)

1 digit(12th)

S-

TAG Datasheet(ST

Proprietary and Confidential

-GM42003N)

2.5.2 Product and

ngs

Figure 5 Product and Mac Labels

FCC

ID and Manufacture (SEMCO).

1) FCC ID : E2X-ST-

2) Model Name : ST-GM

3)

4) S/N :

5) MAC : barcode &

-

3N

003N

ex) May.16.2015

2 digits)

: xxxxxxxx (Tag I.D.)

40 (Tag size & type)

: 3 (Panel & NFC type)

: x (Checksum)

REV 1.0

-Mechanics

11/21

Samsung Electro

Barcode Scanning

Barcode Scanning Condition

an distance is 8 ~ 9cm and angle is horizontality

(DS6708

(QUICKSCAN QD2430)

(MC3190

(MC17T

(MC4597

(NA8NWCNMH40078)

<Horizontality> <

TAG Datasheet(ST

Proprietary and Confidential

30

2.6

S-

-GM42003N)

2.6.1

Typically Sc

Example)

Item

Scanner

PDA

SYMBOL

DATALOGIC

Motorola

M3

MODEL Distance

-SR20007ZZR) 8~9cm 8~9cm

-SI2H04E0A) 8~9cm

-00) 6cm

-BAPBA0000) 8~9cm

8~9cm

Angle

Horizontality Horizontality Horizontality

30º

Horizontality

º

>

REV 1.0

-Mechanics

12/21

Samsung Electro

release

(S

Ready to Gateway(S

wake up Tag with R/C

Tag start to communicate wi

Tag display the numeric information received from Gateway

Check Tag(EPD display status & MAC address value)

Wake up Tag with R/C

Check Tag(EPD display(blank display))

both

see ‘Black’

Compare MAC address with that of label attached to

TAG Datasheet(ST

Proprietary and Confidential

or Back plane.

3 Operation Test

S-

-GM42003N)

It will be updated before 2nd

 Equipments : Gateway

 Target DUT : EPD TAG

. Below is just a sample.

-Gate), R/C (S-TAG), Jig for power supply

 Test Scenario

①

Install Tag on Jig

② ③ ④ ⑤ ⑥ ⑦ ⑧



Criterion

①

Good : You can

②

REV 1.0

(Below

Figure 6 Operation Test

-Gate) and R/C

th Gateway

two conditions should be all satisfied)

→

‘White’ display

Front

-Mechanics

13/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential



Position

① ②

Wake up

NFC

-GM42003N)

REV 1.0

-Mechanics

14/21

Samsung Electro

by display

release.

Display

S-

TAG Datasheet(ST

Proprietary and Confidential

State

User Action

STATE: 1

None

STATE: 1

To assign a tag using a PDA

A tag woken up by an RC

-GM42003N)

4 ESL Operation

It will be updated before 2nd

Below is just a sample.

Initial display when shipped from the manufacturer (Tag version, MAC address).

No change.

REV 1.0

STATE 1  2

Searching for GWs (Tag version, MAC address and triangle).

-Mechanics

15/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential

None

STATE 2

3

Woken up by an RC

STATE 4

6

None

-GM42003N)

STATE 2  4

A tag is connected to a GW and received price (Price)



A tag failed to locate a GW (Tag version, MAC address).

STATE 4  5

When a tag is connected to a GW, and woken up by an RC, Next page display predefined.

Display is end, tag wait 10 second wakeup signal by RC. When signal is detected in this time, immediately return first Page and Send Price Request to GW. No signal in this time, after 10 second return first Page and Same Operation.



Connection to a GW is lost (price and Rectangle on upper right corner)

REV 1.0

-Mechanics

16/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential

Woken up by an RC

To clear an ass

using a PDA

-GM42003N)

STATE 6  6

When connection is lost and woken up by an RC

(blinks with the price and

Rectangle)

Starts to search GWs.

STATE 4  1

Initial display

igned tag

(Tag version, MAC address)

REV 1.0

-Mechanics

17/21

Samsung Electro

TAG Datasheet(ST

Proprietary and Confidential

5 Package

S-

-GM42003N)

REV 1.0

-Mechanics

18/21

Samsung Electro

autions for Treat

Provisions should be made to protect against any damage to the product caused by improper handling.

It is highly recommended that the product should be installed within

. Recommended storage condition is in

This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,

therefore, may not be used for applicat

Usage Environment

when using this RF device in the vicinity of other electronic devices and appliances.

Most electronic devices and appliances use electromagnetic waves. Electromagnetic

RF device can affect other electronic devices and appliances.

If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.

Moisture and liquids can damage internal parts

Do not place or store the product on a sloped surface. The product may slide and fall off the

Use the product in temperatures ranging from

used or stored under temperature extremes.

The display panel needs extra care when handling.

Do not apply any impacts on outside since e

Continuous exposure to excessive moisture (over 60% RH) or UV makes display

Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.

Avoid areas with strong magnetism or subject to magnetism.

Contact between the device and a magnetic object can lead to malfunctions.

the product near heat

the vicinity of highly pressurized containers.

S-

TAG Datasheet(ST

Proprietary and Confidential

3 months from the date

60% RH environment.

ions where safety of human lives is concerned.

and circuit boards if allowed to enter into the device

. Parts and circuits m

producing kitchen appliances like a stove or a microwave or in

-GM42003N)

6 C

the logistics hub

6.1

Take extra cautions

ment

0-40 Celsius degree, 20-

of arrival in

waves emitted by this

6.2

Storage and Use



itself.



surface and damaged.



-

shortened.

-



 Do not place

REV 1.0

-

-Mechanics

0℃ to +40

-Paper display is fragile.

℃

ay be damaged if

lifetime

19/21

Samsung Electro

External impact to the product, such as from being dropped, can damage the

ting and bending the product can damage the exterior casing and the internal components.

If this product operates abnormally in eliminating battery vinyl or replacing battery, you should

discharge it by contacting battery terminal (+) and (

uses 2.4GHz frequency band for wireless communication network. Radio

communications can be limited or affected by other applications which share same frequency band,

such as WiFi, Bluetooth, Zigbee, etc.

communications, updates and screen renewal

Battery Replacement

Authorized persons with the following knowledge are allowed to replace the battery.

tronic assemblies like circuit board

Note : If not authorized person, it will not give any warranty.

need to replace the battery.

Risk of short circuit if battery is incorrectly

Keep attention that your hands are dry before you start with replacement

way batteries from children and infants.

t heat, charge, bend, drop, short

the used battery together with the new battery or different type of batteries.

Note : Battery rarely has a little stain or leak.

.

Put in the new batteries

Check the batteries direction.

S-

TAG Datasheet(ST

Proprietary and Confidential

reduce battery life time.

. Compliance of the instruction

lease contact authorized person and get instructions.)

Positive

Negative

-GM42003N)



casing can be separated.



Twis



This product



Frequent



6.3

Audience

- . Battery / -. Elec



※

(When

product or battery

-).

s may

/ -

P

Instructions

-

- Keep a

- Don’

- Don’t mix

※

Steps

①

Open the battery cover

②

Take out the batteries.

③ ④ ⑤

Put the battery cover.

installed/stored.

-circuit and disassemble battery.

■■■■

Battery directional

(+) (+)

(+)

.

[View] Top : (+)

Bottom : (-)

REV 1.0

-Mechanics

20/21

Samsung Electro

ay generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate this equipment if a

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

eceived, Including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonab

harmful interference in a residential installation This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

nications, However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the us

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit

Consult the dealer or an experienced radio/TV technician for help.

TAG Datasheet(ST

Proprietary and Confidential

er is encouraged to try to correct

different from that to which the receiver is connected.

Caution This device complies with FCC radiation exposure limits for an uncontrolled environment. Avoid operating this device at a distance less than 20cm form the user

6.4

FCC

FCC ID : E2X-ST-GM42003N

WARNING : This equipment m

or modification is made.

S-

-GM42003N)

n unauthorized change

r

interference to radio commu

-

le protection against

REV 1.0

-Mechanics

21/21