Samsung Electro Mechanics ST GM42001 User Manual

Samsung Electro

CUSTOMER APPROVAL SHEET

Company Name

APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver.

CUSTOMER REMARK :

Issued By

IH Jo

Maetan

S-

TAG Datasheet(ST

Proprietary and Confidential

00

1.0

Approved By

eon

-GM42001)

Preliminary

MODEL

CUSTOMER

APPROVAL

ST-GM42

1

□ □

150, Maeyoung-ro(

Checked By

GY Byun JG Ryu

Samsung Electro-Mechanics

3-Dong), YoungTong-Gu, Suwon, Gy

Tel : 82-31-210-5114

)

ggi-Do, Korea

REV 1.0

-Mechanics

1/21

Samsung Electro

Datasheet

Label (Electronic Label System)

general performance and specifications of

based on

S-

TAG Datasheet(ST

Proprietary and Confidential

for

and products mentioned herein

may be the trademarks of their respective owners.

No part of this document may be reproduced, stored in a

retrieval system, or transmitted in any form or by any means

without the express written consent of Samsung Electro

This document is subject to change without notice.

-GM42001)

Preliminary

S-TAG

S-

REV 1.0

Samsung Electro-Mechanics

2014-12-16

Summary

This datasheet presents the

S-Tag

S-Label ESL (Electronic

Shelf Label) system, which is

IEEE 802.15.4.

The names of actual companies

Mechanics.

-

REV 1.0

-Mechanics

2/21

Samsung Electro

................................

PECIFICATION

................................

PLAY

................................

CAUTIONS FOR TREATME

................................

S-

TAG Datasheet(ST

Proprietary and Confidential

................................

-GM42001)

Preliminary

Table of Contents

1 GENERAL DESCRIPTION

1.1

F

EATURES

1.2

T

YPICAL APPLICATIONS

1.3

A

PPEARANCE

2 SPECIFICATION

2.1

P

RODUCT SPECIFICATION

2.2

R

ADIO

2.3

M

2.4

L

ABELS

2.5

B

ARCODE SCANNING

(RF) S

ECHANICAL DRAWING

................................................................

................................

................................................................

................................

..... 5

......................... 6

......... 6

...................... 7

.................. 8

....... 8

... 8

......... 9

............................ 11

............ 13

3 OPERATION TEST

4 ESL OPERATION BY DIS

5 PACKAGE

6

6.1

U

6.2

6.3

SAGE ENVIRONMENT

S

TORAGE AND USE

FCC

................................

NT................................

................................

.............. 14

........................... 15

........................... 18

............................. 19

.......... 19

.............. 19

............................... 20

REV 1.0

-Mechanics

3/21

Samsung Electro

Initial release

S-

TAG Datasheet(ST

Proprietary and Confidential

-GM42001)

Preliminary

Document History

Rev. Date

1.0 16 Dec 014

Revision history

Page

-

REV 1.0

-Mechanics

4/21

Samsung Electro

Description

product is a part of Samsung S

, Remote controller

displays price and other product information on

paper in places like retail markets.

receives product price/information updates from

is the product based on IEEE standard 802.15.4

consists of RF transceiver, RF circuitry and

802.15.4 based network protocol and MAC protocol and other peripheral devices.

S-

TAG Datasheet(ST

Proprietary and Confidential

Label (Electronic Shelf Label) system as well as S

Label system make up a system that electronically

traditionally printed or written on

changes

for low power wireless communication

ARM Cortex M3

-GM42001)

Preliminary

1

General

This S-Tag

Gateway (S-Gate)

S-Tag

and other information.

S-Tag

applications. S-Tag

(S-RC). S-

-

S-Tags, which has been

S-Gate and updates or

-Label

its display of price

MCU offering IEEE

Figure 1 ESL System

REV 1.0

-Mechanics

5/21

Samsung Electro

isplay

400

Communication : Wireless communication based

Operating on 2.4GHz Unlicensed ISM band for ZigBee

Low Power Consumption

Magnetic Wakeup (using Reed switch)

3

Working condition: Indoor where wireless communication is

Applications

Retail industry with electronic display

Intelligently communicating, managing, and optimizing price and product informations.

S-

TAG Datasheet(ST

Proprietary and Confidential

.

-GM42001)

Preliminary

1.1 Features

-

Display : E-Paper D

-

Display Resolution :

-

External Wakeup :

-

Outline Dimension : 10

-

1.2 Typical

-

(EPD) (active type) (84.80 x 63.60 mm)

x 300 pixel (120dpi)

on IEEE 802.15.4

.46 mm x 87.43 mm x 14.5 mm

available.

s, platforms, solutions and services

REV 1.0

-Mechanics

6/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential

-GM42001)

Preliminary

1.3

Appearance

Figure 2 Appearance

REV 1.0

-Mechanics

7/21

Samsung Electro

Specification

Item

Size

Housing Color

Information display

Communication

Distance

Etc.

Specification

Transmit Power

Error Vector Magnitude

Tx Current

RX Receiver Sensitivity

S-

TAG Datasheet(ST

Proprietary and Confidential

Description

103.46 mm x 87.43 mm x 1

4.5 mm

CR2450 Lithium Battery (3V,

3

PCS)

Electrical paper display (

active type

) (

84.80

x

63.60

White

Price, Unit,

Symbol

etc.

Wireless communication based on IEEE 802.15.4

Radius

20m ( Line of Sight)

No additional anti

-

theft locking structure : Rail Mounted only

SPEC

Condition

Min Typ Max

-4 1 6

dBm

- 10 30 % When measured for 100 chips

- 35 mA

Total current at max Tx Power

-90 - - dBm PER <

mm)

1%

-GM42001)

Preliminary

2 Specification

2.1

Product

Battery

Display

2.4 ~ 3.3Vdc (condition : In active status)

Display Resolution : 400 x 300 pixel

Operation Temp.

2.2

Radio (RF)1

Item

TX

1

Test Channel : 2480MHz

REV 1.0

Parameter

0 ~ 40 ℃ (@20~60% RH)

-Mechanics

Unit

8/21

Samsung Electro

Mechanical Drawing

S-

TAG Datasheet(ST

Proprietary and Confidential

-GM42001)

Preliminary

2.3

2.3.1 Case Dimension

REV 1.0

Figure 3 Mechanical Dimension

-Mechanics

9/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential

-GM42001)

Preliminary

2.3.2 Exploded View

REV 1.0

Figure 4 Exploded View

-Mechanics

10/21

Samsung Electro

nformation

Serial 1, 2 Code Value

G

③

Year : Last two digits of manufacturing year.

xample : 201

Month : Manufacturing m

②

(1 ~ 9, X(10), Y(11), Z(12))

Date : Manufacturing da

③

(1 ~ 9, A(10) ~ V(31))

Vendor : Manufacturing

④

: SEMTHAI, T : TSEM, etc

Line number : Manufactu

⑤

Revision : Product revision number

A : First, B : Second, C : Third, etc

: Last 3 characters

S-

TAG Datasheet(ST

Proprietary and Confidential

-GM42001)

Preliminary

2.4

Labels

2.4.1 Serial Number I

14 3

①

(00 ~ 99, E

②

S A A 2JW

④

⑤

⑥

⑦

4 is '14')

(S

('A', 'B', 'C', etc)

⑥

(

ZigBee IC Lot Number⑦

)

REV 1.0

-Mechanics

11/21

Samsung Electro

Mac Label Drawing

Product information is indicated in a printed sticker label. The information consists of MODEL (model

name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark,

42

MFD : (Month).(Date).(Year)

Serial Number Information

barcode number(hexadecimal 1

6 digits (1st ~ 6th) : xxxxxx (Company code)

digits (7th ~ 1

th ~ 1

S-

TAG Datasheet(ST

Proprietary and Confidential

(Increasing number : 000000 ~ FFFFFF)

-GM42001)

Preliminary

2.4.2 Product and

s

Figure 5 Product and Mac Labels

ID and Manufacture (SEMCO).

1) Model Name : ST-GM

2)

3) S/N :

4) MAC : barcode &

-

- 6

- 4 digits (13

001

ex) May.16.2014

2th) : xxxxxx

6th) : 4201

FCC

6 digits)

REV 1.0

-Mechanics

12/21

Samsung Electro

Barcode Scanning

Barcode Scanning Condition

Typically Scan distance is 8 ~ 9cm and angle is horizontality

(DS6708

(QUICKSCAN QD2430)

(MC3190

(MC17T

(MC4597

(NA8NWCNMH40078)

<Horizontality> <

S-

TAG Datasheet(ST

Proprietary and Confidential

30

-GM42001)

Preliminary

2.5

2.5.1

Example)

Item

Scanner

PDA

SYMBOL

DATALOGIC

Motorola

M3

MODEL Distance

-SR20007ZZR) 8~9cm 8~9cm

-SI2H04E0A) 8~9cm

-00) 6cm

-BAPBA0000) 8~9cm

8~9cm

Angle

Horizontality Horizontality Horizontality

30º

Horizontality

º

>

REV 1.0

-Mechanics

13/21

Samsung Electro

release. Below is just a sample.

(S

Ready to Gateway(S

wake up Tag with R/C

Tag start to communicate with Gateway

Tag display the numeric information received from Gateway

Check Tag(EPD display

Wake up Tag with R/C

Check Tag(EPD display(blank display))

both

You can see ‘Black’

Compare MAC address with that of label attached to

S-

TAG Datasheet(ST

Proprietary and Confidential

or Back plane.

-GM42001)

Preliminary

3 Operation Test

It will be updated before 2nd

 Equipments : Gateway

 Target DUT : EPD TAG

-Gate), R/C (S-TAG), Jig for power supply

 Test Scenario

①

Install Tag on Jig

② ③ ④ ⑤ ⑥ ⑦ ⑧



Criterion

①

Good :

②

(Below

Figure 6 Operation Test

-Gate) and R/C

status & MAC address value)

two conditions should be all satisfied)

→

‘White’ display

Front

REV 1.0

-Mechanics

14/21

Samsung Electro

by display

release.

Display

S-

TAG Datasheet(ST

Proprietary and Confidential

State

User Action

STATE: 1

None

STATE: 1

To assign a tag

A tag woken up by an RC

STATE 2

4

None

using a PDA

-GM42001)

Preliminary

4 ESL Operation

It will be updated before 2nd

Below is just a sample.

Initial display when shipped from the manufacturer (Blank display).

No change.

REV 1.0

STATE 1  2

Searching for GWs (MAC address, tag version and triangle).



A tag is connected to a GW and received price (Price)

-Mechanics

15/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential

STATE 2

3

Woken up by an RC

None

Woken up by an RC

-GM42001)

Preliminary



A tag failed to locate a GW (blank).

STATE 4  5

When a tag is connected to a GW, and woken up by an RC, Next page display predefined.

Display is end, tag wait 10 second wakeup signal by RC. When signal is detected in this time, immediately return first Page and Send Price Request to GW. No signal in this time, after 10 second return first Page and Same Operation.

REV 1.0

STATE 4  6

Connection to a GW is lost (price and Rectangle on upper right corner)

STATE 6  6

When connection is lost and woken up by an RC

(blinks with the price and

Rectangle)

Starts to search GWs.

-Mechanics

16/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential

To clear an assigned tag

using a PDA

-GM42001)

Preliminary

STATE 4  1

Initial display

(Blank display).

REV 1.0

-Mechanics

17/21

Samsung Electro

S-

TAG Datasheet(ST

Proprietary and Confidential

-GM42001)

Preliminary

5 Package

REV 1.0

-Mechanics

18/21

Samsung Electro

autions for Treat

Provisions should be made to protect against any damage to the product caused by improper handling.

It is highly recommended that the product should be installed within

. Recommended storage conditio

This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,

therefore, may not be used for applications where safety of human lives is concerned.

Environment

when using this RF device in the vicinity of other electronic devices and appliances.

Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this

ronic devices and appliances.

If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.

Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the devic

Do not place or store the product on a sloped surface. The product may slide and fall off the

Use the product in temperatures ranging from

used or stored under temperature extremes.

The display panel needs extra care when handling.

Do not apply any impacts on outside since e

Continuous exposure to excessive moisture (over 60% RH) or UV makes display lifetime

Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.

Avoid areas with strong magnetism or subject to magnetism.

Contact between the device and a magnetic object can lead to malfunctions.

Do not place the product

S-

TAG Datasheet(ST

Proprietary and Confidential

3 months from the date of

60% RH environment.

. Parts and circuits may

producing kitchen appliances like a stove or a microwave or in

-GM42001)

Preliminary

6 C

the logistics hub

6.1

Usage

Take extra cautions

RF device can affect other elect

ment

n is in 0-40 Celsius degree, 20-

arrival in

6.2

Storage and Use



itself.



surface and damaged.



-

shortened.

-



near heat-

0℃ to +40

-Paper display is fragile.

℃

e

be damaged if

REV 1.0

-Mechanics

19/21

Samsung Electro

the vicinity of highly pressurized containers.

External impact to the product, such as from being dropped, can damage the

ing the product can damage the exterior casing and the internal components.

If this product operates abnormally in eliminating battery vinyl or replacing battery, you should

discharge it by contacting battery terminal (+) and (

This product uses 2.4GHz frequency band for wireless communication network. Radio

communications can be limited or affected by other applications which share same frequency band,

such as WiFi, Bluetooth, Zigbee, etc.

communications, updates and sc

This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate th

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept a

received, Including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to

harmful interference in a residential installation This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

ce to radio communications, However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o

the interference by one or more of the following measures:

S-

TAG Datasheet(ST

Proprietary and Confidential

reduce battery life time.

is equipment if an unauthorized change

provide reasonable protection against

ff and on, the user is encouraged to try to correct

-GM42001)

Preliminary



casing can be separated.



Twisting and bend



Frequent

6.3

FCC

FCC ID : E2X-ST-GM42001

reen renewals may

product or battery

-).

WARNING :

or modification is made.

interferen

ny interference

REV 1.0

-Mechanics

20/21

Samsung Electro

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an ou

Consult the dealer or an experienced radio/TV technician for help.

S-

TAG Datasheet(ST

Proprietary and Confidential

tlet on a circuit different from that to which the receiver is connected.

Caution This device complies with FCC radiation exposure limits for an uncontrolled environment. Avoid operating this device at a distance less than 20cm form the user.

-GM42001)

Preliminary

-

REV 1.0

-Mechanics

21/21