Samsung YP-60 User Manual 2

Connecting the USB cable

1

Connect a USB cable to the USB port on the computer.

2

Connect the opposite end of the USB cable to the
USB cable port on the right side of the yepp.

● If you disconnect the USB cable from your PC while

implementing a command or initializing during
USB driver installation, your PC may not function correctly.

3

The USB driver is installed with a message saying that it
is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed.

4

Upon installation of the USB driver
"SAMSUNG YP-60”

will appear in the

[Start] → [Settings] → [Control Panel] →
[System Properties] → [Device Manager].

➤ Before connecting the yepp to PC, make sure to install yepp Studio.

Location of Controls

Turning Power On and Off

Playing Music Pausing Music

21

YP-60 Quick Guide

ENC/NAVI.

Button

Move to Track/

Speed Search Button

Volume Button

MENU/
Loop Repeating Button

Sports Function Button

Play/Stop/Pause
On/Off Button

Display

Hold Switch

Reset Hole

USB Cable
Connection Port

ENC Jack

Earphone JackHeart Rate Measurement Sensor

● Power On : Press and hold the button to turn on the power.

● Power Off : Press and hold the button to turn off the power.

Press the button.

● Playback starts.

Press the button to pause playback.

● While in Pause mode, briefly press again to resume playback.

● If the device won’t respond even after pressing the buttons,

reboot it by pressing the Reset Hole with a pin.

USB connect cable

Downloading files

1

Turn on the yepp and connect it to your PC.

2

Select the file you wish to download from the Play List Window or File List Window.

● If the Play List Window is empty, use the [Open Files] button on the main window or

drag-and-drop the desired files from the File List Window to the Play List Window.

3

Drag-and-drop the selected files to the Music folder in the yepp window or
click the [Transmit to yepp] button to move the files.

NNNNoooottttee

ee

● Refer to Help for more detailed information about using yepp Studio.

● When running the yepp Studio for the first time, input the serial number listed on the back of the yepp when the

Product Number Registration Window appears.

● You cannot use yepp Studio while Fitness Manager is running.

Viewing Help on yepp Studio

3 4

AH68-01563A (Rev 0.0)

: [Open Files] button

: [Transmit to yepp]

button

Run yepp Studio and press F1.

● Help will appear.

Move the arrow to the top of yepp Studio and right click on the
mouse. The following selection window will appear.

● Click on Help and the Help window will appear.

N