Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
Do not expose to extreme
temperatures (above 95°F or
below 23°F). Do not expose to
moisture.
Do not place heavy objects on top
of the device.
Do not expose to direct sunlight
or heat sources.
4
Do not apply excessive pressure
to the device.
Do not expose to chemicals such
as benzene and thinners.
Do not store in dusty areas.Do not try to disassemble and
Do not let any foreign matter spill
into the device.
Remove batteries when the
device is left unused for a long
period of time.
repair the device yourself.
Earphones
Follow Traffic Safety Instructions
● Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
● It may cause an accident if you turn up the volume of the earphones while walking down the street,
especially crossing at intersections.
Protect your ears
● Do not turn up the volume too high.
Doctors warn against prolonged exposure to high volume.
● Stop using the device or turn the volume down if you have ringing in your ears.
Ambient operating conditions
● Ambient temperature:
Humidity : 10 ~ 75%
5°C ~ 35°C (41°F ~ 95°F)
Environmental Information
● Follow local guidelines for waste disposal when discarding packages, batteries, and old
electronic appliances.
● Yepp packages use cardboard, polyethylene etc., and do not use any unnecessary materials.
5
Page 4
Miniature Design
SRS
WOW
Convenient small and light design
Removable Storage Device
You can easily copy and paste files to the yepp player using
Windows Explorer
Upgradable
You can upgrade the built-in programs if available.
ex) Add functions, CODEC, etc.
Please check the yepp home page (http://www.samsungyepp.com)
for upgrades.
MP3 & WMA Playback
MP3 is an MPEG1 Layer3 audio format.
WMA is an Microsoft Windows Media audio format.
15-Hour Continuous Play
This unit uses one AAA/LR03 alkaline battery. Operation can last up to 15 hours.
Actual playing time may vary according to the type and capacity of the battery.
Featuring 3D Sound
The 3D feature adds spaciousness to the sound.
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc.
Page 5
Voice Recording Function
Suitable for recording lectures, meetings.
Components
Backlight
Attractive Blue-Color Backlight
Sound
You can adjust the equalizer manually.
Belt Clip
User manual
AH68-01283B
Earphones
AH30-00056B
Player
Model
Built-in memory
● The capacity of the useable built-in memory is less than indicated as the internal
firmware uses a part of the memory as well.
● Design of accessories is subject to change for improvement without notice.
One Battery
(1.5V AAA/LR03 type)
4301-000115
YP-35 S
64MB
AH39-00498A
Neck Strap
AH61-01370A
YP-35 H
128MB
USB Cable
AH61-01411A
installation CD
AH80-00051C
9
Page 6
Location of Controls (yepp)
Microphone
Earphone Jack
Display
Play/Stop/Pause/
Forward/Backward
Button
MENU/Loop Repeating/
Mode/Volume Button
SRS Button
Neck strap
Hook
Hold Switch
➡
USB Cable
Connection Port
Battery Cover
10
Display
Equalizer, SRS indicator
Music/Voice/
Rec mode indicator
Play mode indicator
Inserting a Battery
➡
➪
Track Number indicator
Volume indicator
Loop Repeating indicator
Remaining Battery
Power indicator
Playtime indicator
Title (track & artist) indicator
Slide the cover in the direction
1
of the arrow to open.
Insert a battery to the right poles ,
2
and push-close the cover in the direction
the arrow as indicated.
11
Page 7
Connecting yepp to PC
System Requirements.
● Pentium 133MHz or greater
● Windows 98 SE/ME/2000/XP
● 20MB of available hard disk space
● CD-ROM drive
(double speed or greater)
● USB port (1.1) supported
● VGA graphic
NNoottee ::
● Install the operating system in
Administrator Account mode for Windows
2000 or XP. Otherwise, installation will not
be completed.
● Windows ME, 2000 and XP can
recognize the driver without installing the
provided program. However, you must
install the program in order to format yepp
and upgrade firmware.
●
If the YP-35 program has not been
installed in Windows 98, then it will not
communicate with your removable disk.
You must install the USB driver file
first.
12
Before connecting yepp to PC, make sure to install
USB driver. If “Add New Hardware Wizard” appears, pressthe [Cancel] button and install USB driver.
Installing software
Insert the Installation CD into CD-ROM drive.
The picture shown below appears.
1
Select [USB Driver Install].
Click [Next] in the series of windows
2
that appear.
When installation is completed,
connect yepp to PC and use it
as shown on the next page.
Continued...
13
Page 8
Connecting yepp to PC with USB cable
Plug one end of the USB cable into the USB
port on the back of the PC.
3
●
The yepp will automatically turn on.
Connect the opposite end of the USB cable to the
4
USB cable port on the bottom of the yepp.
● If you disconnect the USB cable from your PC while
implementing a command or initializing during USB driver
installation, your PC may not function correctly.
USB driver is installed with a message saying that it
is searching for a new device. You may not see the
5
display screen during installation.
Go to the device manager to check that installation
has been successfully completed.
Upon installation of the USB driver
"SAMSUNG YP-35”
6
[System Properties] ➝ [Device Manager].
will appear in the
USB connect cable
:
NNoottee :
How to check USB driver
How to check USB driver
Windows 98:
Control Panel ➝ System ➝ Device Manager ➝
Universal Serial Bus controllers/SCSI and RAID controllers
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝
Device Manager ➝
USB Mass Storage Device
Windows XP:
Control Panel ➝ System ➝ Hardware ➝
Device Manager ➝
USB Mass Storage Device
NNoottee ::
If the YP-35 program has not been installed in Windows 98, then it will not
communicate with you’re your solid disk. You must install the USB driver file first.
When USB driver is not Installed automatically,
refer to next page.
7
NNoottee ::
For WinXP, the following window will appear whenever
you connect the USB cable to your YP-35.
Universal Serial Bus controllers
Universal Serial Bus controllers
➝
➝
1514
Page 9
Manual Installation of USB Driver
Go to “Downloading/Uploading files” on page 20 if the USB driver is in place.
Follow these steps if the USB driver is not in place :
Check the device manager.
1
Windows 98,ME:
Control Panel ➝ System ➝ Device Manager
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
Windows XP:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
Check if there is a device listed with
an exclamation point or a question
2
mark (displayed as unknown device
or USB device).
Double click on the device listed with an
3
exclamation point or a question mark.
NNoottee ::
● If you are using Windows 2000 and your version of Windows does not recognize the USB driver,
please download and install the latest service pack from windowsupdate.microsoft.com
●
The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
●
If errors occur continuously when you install the USB driver, reconnect the USB cable
after rebooting your system.
After selecting the driver, click on [Update Driver].
4
Select a compatible driver, click on [Next] to finish.
5
For Windows 98, refer to page 18.
Continued...
16
17
Page 10
In Windows 98
Click [Next] button in the series of windows that appear.
USB driver location
[CD ROM]\setup\Drivers
● To complete the installation
process, reboot the system.
1918
Page 11
Using the removable storage
Downloading/Uploading files
Turn on the yepp and connect yepp to PC.
1
Open Windows Explorer on PC.
2
Select the file to save and drag-and-drop it into the removable disk icon.
The saved files will be played in the order of file name.
3
If you want to change the order, please change the file name.
(In numerical, alphabetical order)
NNoottiiccee ::
● The “WRITING/READING” message will appear during
● Files within a user created folder can only be played in
● The order of music files is not relative to the replay order
20
file download or upload. Disconnecting the USB cable
while “WRITING/READING” is displayed may cause
malfunction of the unit.
Music Mode.
when you select a Solid Disk in Windows Explorer.
Disconnecting the USB cable
After completing the file transmission, you must disconnect the cable in the following way:
Double-click on the green arrow
in the taskbar on the bottom
1
right of the window. Disconnect
the USB cable.
Select the USB device, and then
press the [Stop] button.
2
Continued...
21
Page 12
Formatting
Select the removable disk icon
and click the right mouse button
1
to select [Format].
Press the [Start] button.
● All saved files will be formatted.
2
● You can change the name of
removable disk by selecting
[Volume label].
Installing yepp studio
Insert the Installation CD into CD-ROM drive.
Select [yepp studio].
1
NNoottiiccee ::
● You must format YP-35 with the provided formatting program only . The device cannot
● Care must be taken as formatted files can not be recovered.
● By formatting, all previously preset menus will be initialized.
NNoottee ::
● You can format by executing "YP-35 Format" located under [Start] ➔ [All Programs]
read data if you attempt to format without the YP-35 program. (The ‘Please Reformat’ message will
appear on the main body.) Format only after you have installed the YP-35 program.
Select language
2
Continued...
2322
Page 13
Click [Next] in the series of windows that appear.
● Please refer to Help for more information on how to use Yepp Studio.
3
To View Help on yepp Studio:
Run Yepp Studio and press F1.
●
Help will appear.
Move the arrow to the top of yepp Studio and right click on the
mouse. The following selection window will appear.
●
Click on Help and the Help window will appear.
➪
NNoottee ::
● Music recognition technology and related data are provided by Gracenote and Gracenote CDDB®
Music Recognition Service
● CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote
CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are trademarks of
Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
SM
.
2524
Page 14
Connecting yepp to Macintosh
System Requirements.
● 20MB of available hard disk space
● System Memory 64MB or greater
● CD-ROM drive
(double speed or greater)
● USB(1.1) port supported
● Macintosh OS 9.X ~ 10.2.6
NNoottee ::
● The driver can be recognized by
Machintosh without installing an extra
program. The appropriate program
however must be installed to format and
upgrade the firmware.
● You cannot install softwares for YP-35 in
Macintosh OS 10.0 - 10.2.5.
26
Installing software
Insert the Installation CD into CD-ROM drive.
The picture shown below appears.
1
Select [Samsung YP-35 Installer].
❈ When you install a program in Macintosh OS X, it
may check the user login information.
After installation is complete, click on the OK button.
2
Continued...
27
Page 15
Using the removable storage
Connecting yepp to Macintosh with USB cable
Plug one end of the USB cable into the
USB port on the back of the Macintosh.
3
Connect the opposite end of the USB cable to
4
the USB cable port on the bottom of the yepp.
●
The yepp will automatically turn on.
●
A untitled or unlabelled portable disc is created.
USB connect cable
Downloading/Uploading files
Turn on the yepp and connect yepp to Macintosh.
1
A untitled or unlabelled portable disc will appear on the
Macintosh screen.
2
Select the file to save and drag-and-drop it into the removable disk icon.
3
NNoottiiccee ::
● The “WRITING/READING” message will appear during file
● Make sure to empty the trash after deleting a file from the
download or upload. Disconnecting the USB cable while
“WRITING/READING” is displayed may cause malfunction
of the unit.
portable disc in order to free up space to download
additional files.
Continued...
2928
Page 16
Disconnecting the USB cable
After completing the file transmission, you must disconnect the cable in the following way:
Drag and drop the portable disc to the trash.
1
Formatting
Click on Application Program and
select [Samsung YP-35 Formatter].
1
Press the [Start] button.
● All saved files will be formatted.
2
● You can change the name of
removable disk by selecting
[Volume label].
Disconnect the USB cable.
● Disconnecting without deleting the portable disc may cause a malfunction.
2
NNoottiiccee ::
● If you format yepp in the Macintosh without installing the provided program, it may not read the data.
● Care must be taken as formatted files can not be recovered.
● By formatting, all previously preset menus will be initialized.
3130
Page 17
Listening to Music with yepp
First, insert the battery and connect the earphones to the player.
Playing Music
(Power On)
When you press the button, the
yepp logo appears and a music/voice
file is played.
: ● WMA files can only be played at bit rates between 48Kbps and 192Kbps.
NNoottee :
32
[supplied by Windows Media Player (Ver 8.0)] WMAfiles less than 48Kbps may not be played.
● Power off time can be set in the MENU mode.
When you press the button while playing,
the music stops. If no buttons are pressed within
10 seconds (changes depending on settings), the
yepp automatically powers off.
●
Stopping Music
(Power Off)
You can also turn off the power by pressing and
holding the button on the main body.
Setting up Volume/Hold Functions
Adjusting the Volume
Press thebutton on the side of the
yepp player to adjust the volume while playing.
NNoottee ::
● Volume ranges from 00 to 30.
● Press to adjust the volume by one level.
Press and hold to increase
or decrease the volume in greater increments.
HOLD Function
Under Hold mode, buttons will not work.
Slide the HOLD switch on the player in the
direction of the arrow.
❈Buttons on the yepp player will not work.
❈When a button is pressed, “ HOLD!” message
will appear on the display.
33
Page 18
Changing Modes
Recording Voice
Press the button briefly while the player is stopped.
1
Move to the mode you want by using the button, and then
press the button.
2
Music Mode
Voice Mode
Record Mode
: ● You will exit from the Mode Switching function if no action is taken for 10 seconds or if
NNoottee :
34
another button is pressed during mode switching.
To Record Voice
Recording will begin when Recording
1
Mode is selected in Mode Switching.
Recording will pause when the button
2
is pressed. Press the button once again to
recommence recording.
When the Mode button is pressed, recording
3
will stop, a voice file will be created, and you
will be switched to Voice Mode.
NNoottee ::
● The number of saved voice files and hours available for
recording will be displayed when Record Mode is
selected while the player is stopped.
● Recording is done in the order of V001,V002..…
● When memory is full, recording stops automatically.
● The Recording function only activates when the player is stopped.
● The LCD will not illuminate during Voice Recording.
35
Page 19
Searching for Music/Voice Files
:
NNoottee :
● VBR(Variable Bit Rate) file:
MP3 file whose compression rate
changes when played.
● With VBR files, pressing the
button within 5 seconds from the
start of the track may not result in
the previous track playing.
● With VBR files, the actual running
time may differ from that of the
player display.
● This player may not play back
MPEG1 LAYER1 files.
36
Searching for Specific Parts in PLAY Mode
● Press and hold the button while playing to find
the part you want to listen to.
● Release the button to resume playing.
Searching for Music Files in
PLAY Mode.
● Press the button briefly to play the
next track.
● Press the button briefly within 5
seconds from the start of the track to play
the previous track. Press the button
briefly after 5 seconds from the start of the
track to play from the beginning of the
current track.
Searching for Music Files
in STOP Mode.
● Press the button in STOP mode
to skip to the previous or next track.
37
Page 20
Loop Repeating
Loop Function
Starting Point
Ending Point
Setting up SRS (Sound Retrieval System)
Press the SRS button while in Music Mode.
1
Press and hold the SRS button briefly to select the mode you want.
2
While playing music files, press the
button briefly at the
beginning of the loop you want to set.
blinks in the display.
:
NNoottee :
● Press the button briefly to cancel the loop.
● Set “A” section and move to B section with
38
button to set “B” section
Press the button briefly
again to set the end of the loop.
appears in the display.
The loop is played repeatedly.
● SRS : You will hear 3D Stereo sound.
● TRUBASS: This is a bass boost feature that adds fullness to the sound.
● WOW : This feature allows you to enjoy the SRS and Trubass features simultaneously.
● EQ : Plays at the last EQ setting you made.
:
NNoottee :
● Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
● This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz..
39
Page 21
Setting up MENU
To switch to Menu Mode, press and hold the button while in
Music/Voice Mode.
Press the button briefly to select the menu you want.
To exit from Menu Mode, press and hold the button once again.
● PLAY MODE : To select track repeating mode.
● EQUALIZER : To use equalizer function.
● FILE : To delete or format music files.
● SETTING : To change the basic setup options of the display.
● EXIT : To exit MENU.
:
NNoottee :
● In MENU mode, no input for 10 seconds will cancel the MENU mode.
● Menu mode will be released if any button other than the Volume +/- button is pressed.
Repeating Tracks
Track Repeating Function
In MENU, select PLAY MODE. (refer to “Setting up MENU”)
1
In PLAY MODE, use the button to move to the mode you
want and press the button to select.
2
● INTRO: To play the first 10 seconds of each track.
● NORMAL: To play all the tracks in order one time.
● REPEAT ONE: To repeat one track.
● REPEAT ALL: To repeat all tracks.
● SHUFFLE: To play tracks at random.
● EXIT: To move to the upper menu.
40
41
Page 22
Setting up EQ
EQ Function
In MENU, select EQUALIZER. (refer to “Setting up MENU”)
1
In EQ, use the button to move to the setting you
want (out of the 4 settings) and press the button to select.
2
● Select the DBB Mode if you want to fine-tune the sound.
If you want to manually adjust the equalizer, select User and Bass/Treble.
3
● The adjustment range of Bass/Treble is 0 to 10.
:
NNoottee :
● DBB is for Dynamic Bass Booster, which enhances bass response.
42
Managing Files
Deleting
In MENU, select FILE. (refer to “Setting up MENU”)
1
In FILE, select DELETE and the mode (Music or Voice)
2
the target file is in.
Move the Volume button to the file you want to delete, and then press the
3
Mode button. Select CANCEL to cancel.
Continued...
43
Page 23
Customizing Options (Display)
Formatting
In MENU, select FILE. (refer to “Setting up MENU”)
1
In File, select FORMAT.
2
CONFIRM CANCEL
:
NNoottee :
● All files will be deleted when formatting the built-in memory.
Setting Function
In MENU, select SETTING. (refer to “Setting up MENU”)
1
In SETTING, use the button to move to the function you
want to change and select the function by using the button.
2
Continued...
4544
Page 24
DISPLAY
BEEP
● PLAYTIME: displays current play time
● REMAIN TIME: displays remaining play time
● USED SIZE: displays using memory
● FREE SIZE: displays remaining memory
BACK LIGHT
● Use the button to set the
Backlight “ON” time.
●
The setting range of backlight-on time is 0 to 10
seconds.
✽ The backlight does not illuminate when the
residual battery level is insufficient.
● Use the button to set the
BEEP mode.
● BEEP ON: A beep sounds each time a
● BEEP OFF: No beep sounds when a
NNoottee :
●
No beep sounds while playing or recording of a
music/voice file even when set to ‘BEEP ON’.
button is pressed.
button is pressed.
:
CONTRAST
● Use the button to set the Contrast.
● The setting range of the contrast, which
adjusts the brightness of the screen, is
0 to 10.
Continued...
4746
Page 25
SCROLL SPEED
DEFAULT VOLUME
● Use the button to set the Scroll Speed.
● The setting range of the scroll speed, which
adjusts the speed of the track title flow,
is 0 to 10.
POWER OFF TIME
● Use the button to set the
Power Off Time.
●
The setting is
0 to 25 seconds.
set time if no button is pressed when the
playback ends.
NNoottee :
●
When ‘0 second’ is set, the power will not turn off but
will remain in Standby Mode.
5 different levels ranging from
The power will turn off after the
:
● Use the button to set the
Default Volume.
●
The default volume setting range of the unit is
0 to 25. If the Volume is above 25(26-30) when
you turn the device off, it will default to 25 when the
device is turned back on.
●
If the Volume is set to 25 or lower when you turn the device
off, it will return to that setting when it is turned back on.
WOW LEVEL
● The levels of SRS and TRUBASS can be adjusted.
●
Select the mode you want by using the button.
●
The level for SRS and TRUBASS can each be set within the range of 0 to 10.
Continued...
4948
Page 26
Description of Buttons (yepp player)
BUTTON
STATUS
Power Off
Play
Intro Play
Play
Play
Stop
MENU Mode
PRESSING LENGTH
Longer than 2 Seconds
Short
Short
Short
Longer than 2 Seconds
RESPONSE
Power On, and play
Pause(When no button is
pressed for 10 seconds, yepp
powers off automatically)
Press and hold the 2 seconds
Power Off.
Cancels Intro, returns to Play mode
Play the next track
Fast forward search in PLAY mode
Skip to the next track
Play the next trackPause
Cancel MENU
Volume
Mode
Play
Play
Stop
Pause
Play or Stop Mode
MENU Mode
Play
During Loop Setting
Loop Mode
Stop
Play or Stop Mode
MENU Mode
Short
Play the beginning of the current track.
Longer than 2 Seconds
Short
Short
Short
Short
Longer than 2 Seconds
Set the starting point for loop function
Within 5 seconds from the start:
Play the previous track
After 5 seconds from the start:
Fast reverse search in
PLAY mode
Skip to the previous track
Play the previous track
Volume increase/decrease
Move MENU
Loop mode
Cancel loop mode
Changing modes
(music ↔ voice↔ Recording)
Enter MENU
Selection/Exiting MENU
50
51
Page 27
MENU Table
VOICE
EXIT
MUSIC
SRS LEVEL
Tru Bass LEVEL
EXIT
MENU
PLAY MODE
SETTING
EXIT
EQUALIZER
INTRO
NORMAL
REPEAT ONE
REPEAT ALL
SHUFFLE
EXIT
NORMAL
CANCEL
CONFIRM
TREBLE
EXIT
BASS
CLASS
JAZZ
ROCK
USER
DBB
EXIT
FILE
DELETE
FORMAT
EXIT
DISPLAY
BACK LIGHT
BEEP
CONTRAST
SCROLL SPEED
POWER OFF TIME
DEFAULT VOL
WOW LEVEL
PLAY TIME
REMAIN TIME
USED SIZE
FREE SIZE
EXIT
EXIT
● Select with the button and move.
52
53
Page 28
Troubleshooting
yepp does not work and the LCD displays nothing.
● Check the battery capacity
● Check to see if the battery is inserted to the right poles ( , )
In PLAYmode, music is not played after pressing the button
● Check to see if MP3 or WMA files are saved in the built-in memory.
● Check to see if the HOLD switch is locked.
● Check if the memory is full.
Files cannot be downloaded.
● Check to see if the driver is installed correctly in the computer.
● Check the connection between yepp and computer.
● Check and/or replace the battery, turn on the yepp's power.
● The Windows98 operating system limits the number of files you can save.
Please save your music files by creating a subfolder.
Backlight does not work.
● Check the backlight setup.
● When the battery power is low, the backlight will go out.
54
The buttons do not work.
● Check setting of Hold switch.
● When the message "Please Reformat" is displayed, please format your YP-35
by installing the software using Windows Explorer.
yepp keeps being turned off.
● In Stop mode, the power is automatically turned off after ten seconds
(changes depending on settings).
● Check to see if there are files saved in it.
Something’s wrong with play time displayed during Play mode.
● Check if it plays a VBR (Variable Bit Rate) file.
The time display of a VBR file is inconsistent.
● The time may be incorrect for high compressed (bps) files.
LCD window is dark
● Check Contrast
55
Page 29
Specifications
Memo
Model
Built-in Memory capacity
Voltage
Playing time
Dimensions/Weight
Case
Noise Ratio
Earphones Jack Output Power
Output Frequency Range
Operating Temperature Range
56
YP-35
64MB(YP-35 S) / 128MB(YP-35 H)
1.5V ✕ 1 (AAA/LR03 size alkaline battery)
lasts up to 15hours (Alkaline battery, MP3 128Kbps, Vol level 20)
2.62 ✕ 1.77 ✕ 0.65 inches / 1.04 oz (without battery)
Plastic / Aluminum
80dB with 20kHz LPF (1KHz 0dB)
5mW(Max 10mW)/CH (16 Ω)
20Hz ~ 20kHz
-5 ~ +35˚C (23 ~ 95F)
57
Page 30
Safety Information
FCC Part 15: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, this notice is not a guarantee that
interference will not occur in a particular installaion. If this
equipment does cause harmful
interference to radio or television reception, which can be
detemined by turning the equipment off and on, the user is
encouraged to try one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the distance between the equipment and receiver.
● Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician.
●
58
Modifications
Any changes or modifications not expressly
approved by the grantee of this device could
void the user’s authority to operate the device.
Compliance
This product conforms to the following
Council Directive:
● Directive 89/336/EEC, 92/31/EEC(EMC)
Declaration of Conformity
Name: Samsung Electronics Co., Ltd
Address: 416, Maetan-3Dong, Paldal-Gu, Suwon
City, Kyungki-Do, Korea 442-742
declares under its sole responsibility that the product
Trade Name: Samsung Electronics Co., Ltd
Model Number: YP-35
has been tested according to the FCC/CISPR22/95
requirements for Class B devices and found
compliant with the following standards
EMI/EMC: AnSI C63.4 1992, FCC Part 15 Subpart B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesirable operation.
Party Responsible for Product Compliance
Samsung Electronics America
QA Lab.
3351 Michelson Dr. Suite #290
Irvine, CA92612
59
Page 31
Warranty
Samsung warrants this product as free of
defects in material, design and workmanship
for the period of twelve(12) months from the
original date of purchase.
If during the period of warranty this product
proves defective under normal use and service,
you should return the product to the retailer from
whom it was originally purchased. The liability of
Samsung and its appointed maintenance
company is limited to the cost of repair and/or
replacement of the unit under warranty.
Return of the product for defective reasons
should be to the original purchaser, however
Samsung Authorized Dealers and Authorized
Service Centers will comply with the warranty on
the terms issued to purchasers in the country
concerned, for further information relating to the
Authorized Service Centers contact.
1-800-SAMSUNG (1-800-726-7864)
www.samsungyepp.com
60
WARRANTY CONDITIONS:
1. The warranty is only valid when the warranty card is
properly completed, and upon presentation of the proof of
purchase consisting of original invoice or sales slip
confirmation, indicating the date of purchase, dealers
name, model, serial No. and product number.
Samsung reserves the right to refuse warranty service if
this information has been removed or changed after the
original purchase of the product from the dealer.
2. Samsung's obligations are to the repair of the defective
part, and at its discretion, replacement of the product
(service exchange unit).
3.Warranty repairs must be carried out by an Authorized
Samsung Dealer/Service Center. No reimbursement will
be made for repairs carried out by non Samsung Centers,
and warranty coverage will not be valid for any repairs or
damage caused by such repairs.
4. Repair or replacement under the terms of this warranty
does not give right to extension to or a new starting of the
period of warranty. Repair or direct replacement under the
terms of this warranty may be fulfilled with functionally
equivalent service exchange units.
5. The warranty is not applicable in cases other than
defects in material, design and workmanship. The
warranty does not cover the following:
◆ Periodic checks, maintenance, repair and replacement
of parts due to normal wear and tear.
◆ Abuse or misuse, including but not solely limited to the
failure to use this product for its normal purposed or in
accordance with Samsung's instructions usage and
maintenance.
◆ The product has been used in conjunction with
accessories not approved by Samsung for use with this
product.
◆ Failure of the product arising from incorrect installation
or use not consistent with technical or safety standards
in current force, or failure to comply with product
manual instructions.
◆ Accidents, Acts of God or any cause beyond the control
of Samsung caused by lightning, water, fire, public
disturbances and improper
ventilation.
◆ Unauthorized modifications carried out for the product
to comply with local or national technical standards in
countries for which the Samsung product was not
originally designed.
◆ Repairs performed by non-authorized service centers
such as opening of the product by a non-authorized
person.
◆ The model, serial No. and product number on the
product has been altered, deleted, removed or made
illegible.
6. This warranty does not affect the consumers statutory
rights nor the consumers rights against the dealer from
their purchase/sales agreement.
61
Page 32
THERE ARE NO EXPRESS WARRANTIES OTHER
THAN THOSE LISTED AND DESCRIBED ABOVE, AND
NO WARRANTIES WHETHER EXPRESS OR
IMPLIED,INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITYOR
FITNESS FOR APARTICULAR PURPOSE, SHALL
APPLYAFTER THE EXPRESS WARRANTYPERIODS
STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON,
FIRM OR CORPORATION WITH RESPECTTO THIS
PRODUCT SHALL BE BINDING ON SAMSUNG,
SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF
REVENUE OR PROFITS,FAILURE TO REALIZE
SAVINGS OR OTHER BENEFITS, OR ANY OTHER
SPECIAL, INCIDENTALOR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE OR
INABILITY TO USE THIS PRODUCT, REGARDLESS OF
THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. NOR
SHALL RECOVERY OF ANY KIND AGAINST
SAMSUNG BE GREATER IN AMOUNT THAN THE
PURCHASE PRICE OF THE PRODUCT SOLD BY
SAMSUNG AND CAUSING THE ALLEGED DAMAGE.
WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS,
DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTYAND TO OTHERS AND
THEIR PROPERTYARISING OUT OF THE USE,
MISUSE OR INABILITY TO USE THIS PRODUCTSOLD
BY SAMSUNG NOT CAUSED DIRECTLYBY THE
NEGLIGENCE OF SAMSUNG. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT, IS NONTRANSFERABLE AND STATES
YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation
of incidental or consequential damages, so the
above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights,
and you may also have other rights which vary from
state to state.
This product is for personal use only, and is only for
use in compliance with the limitations of copyright
and other laws.
To obtain warranty service, please contact
SAMSUNG at:
Samsung Electronics America, Inc.
400 Valley Road, Suite 201 Mount Arlington, NJ
07856
Tel: (973) 601-6000, Fax: (973) 601-6001
1-800-SAMSUNG (1-800-726-7864)
www.samsungyepp.com
081299
6362
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.