The product images may differ from actual product appearance.
Manual
This manual describes how to use computer as well as information
on Windows, Internet, Upgrade, and Troubleshooting.
The photographs used in this user manual may be somewhat different in shape and
color to those of your computer depending on the model of your computer.
Contents
1. Getting Started
Introducing the Computer ..........................................................................1-2
Turning the Computer On and Off..............................................................1-5
To use the serial port, you must first connect the supplied dongle cable to the serial port
and then connect the serial device to the dongle cable.
Some serial devices may not be supported.
CD Drive
(Optional, P. 3-2)
Left View
Serial Port (Optional)
DC-In Port
Monitor
Port
Microphone Jack
Fan Vents
Network(LAN) Port
IEEE 1394 Port (4Pin)
Modem Port (Optional, P. 4-3)
(P. 4-4)
Headphone Jack /
S/PDIF Jack (Optical, P. 3-7)
Chapter 1. Getting Started
PC Card Slot
(P. 3-11)
1-3
Rear View
Bottom View
Battery Latches
Battery (P. 5-4)
Security Lock Port (P. 5-10)
Docking Connector
(Optional)
1-4
Manual
CCCCaaaauuuuttttiiiioooonn
Memory Compartment
(P. 5-8)
HDD Compartment
Removing or disassembling the hard disk drive will void your warranty. To replace
nn
the hard disk drive, please contact your nearest Samsung Service Centre.
Turning the Computer On and Off
Turning On
1. Insert the battery and connect the power according to the supplied Installation
Guide.
2. Lift up the LCD while pressing the LCD button.
3. Press and then release the power button to turn the system on.
Power Button
Turning Off
1. Click the Start button on the Taskbar.
2. Select Turn Off Computer.
3. Click Turn Off from the [Turn Off Computer] window.
nn
CCCCaaaauuuuttttiiiioooonn
If the computer has not turned off properly due to a system error, press and hold
the power button for more than 4 seconds to turn the system off. After doing so,
when you turn the system on, the system examination program is executed
automatically.
Chapter 1. Getting Started
1-5
Creating and Changing User Accounts
Multiple users can be registered in a single system so that each user may
use their own customized working environment. Procedures to register
and change user accounts are provided below.
■ Registering a new user
1. Click Start > Control Panel.
2. Click User Accounts > Create a new account.
3. Type a name for the new account, and click Next.
4. Select the account type and click Create Account.
The new user account has been created.
To login with an Administrator Account To delete a user account
NNNNooootttteeee
■ Changing users
1. Click on a user account to delete and click Delete the account.
2. Select either Keep Files or Delete Files, and then click Delete Account.
1. Click Start > Log Off.
2. Click Switch User.
1-6
3. In the [Windows Log On] window, select the desired user name.
Manual
Touchpad
Movement of the pointer (arrow) on the screen will correspond to
movement made with a finger on the touchpad.
Touchpad
the two buttons below the touchpad
provide identical functions to buttons
NNNNooootttteeee
Touchpad buttons
of a mouse.
Locking the touchpad
You can lock the touchpad and use only the keyboard and mouse. To lock the
touchpad function, press the <Fn>+<F9> key combination.
■ Click (Select Function)
Place a finger on the touchpad, move the pointer on the screen to the icon or
item to select, and tap the touchpad once. The click operation is also used to
move the ‘cursor’ during document operations.
■ Double-click (Run Function)
Place a finger on the touchpad, move the pointer on the screen to the item to
run, and quickly tap your finger on the touchpad twice.
Or double-click the left touchpad button.
Chapter 1. Getting Started
1-7
■ Drag (Move / Select)
Drag and drop a part to the required
place.
This button is held down
Place the touchpad pointer on the title bar of the
window.
■ Using the Touchpad Scroll Function
The touchpad has a scroll function, which can be used like the wheel dial of a
wheel mouse. Move up and down along the right edge of the touch pad
(scrolling up and down) or left and right along the bottom edge of the touch pad
(scrolling left and right) to scroll the screen. However, this may not apply to some
programs.
1-8
Manual
CCCCaaaauuuuttttiiiioooonn
NNNNooootttteeee
Please use the touchpad only with your finger. Using sharp devices may damage
nn
the touchpad.
Operating the touchpad or touchpad button while starting your system may
increase the time required for starting Windows.
To utilize the touchpad buttons for other more diverse functions, please refer to the
Mouse icon in the Control Panel.
Using the Keyboard
Function Keys
<Fn> Key
<Fn> Key
Numeric Keypad
Screen Brightness and Volume
Adjustment / Direction Keys
■ Special Function Keys: The <Fn> key activates special functions
pressed in combination with other keys.
Key Combinations
Key
Name
Standby
Gauge
Euro
CRT/LCD
Backlit
Mute
SRS
Touchpad
Etiquette
Mode
Function
Places the computer into standby mode. To resume from standby
mode, press the power button.
Shows the current power source and the remaining battery charge.
Used to type the symbol for Euro currency.
Switches the display between the LCD and an external display
device when an external display device is connected. (P. 6-8)
Turns the LCD on and off.
Turns the audio output on and off.
This feature enables you to experience more stereophonic sound. You
can select one of the following modes by pressing the button.
WOW XT Mode: Select to listen to music.
CCCCaaaauuuuttttiiiioooonn
TRUSURROUND Mode: Select to watch a movie.
SRS OFF Mode: Switches off the SRS function.
The SRS function is only supported through the built-in
speaker of the computer and the headphones. It is not
supported through the S/PDIF port.
In low-noise mode, the operational speed of a pro-
nn
gram may be slowed down because the CPU operates
at minimum speed, and the system may overheat
because the fan is rotating only at low speed.
NNNNooootttteeee
Turns the touchpad function on and off.
You can select Etiquette Mode when you require a quiet operating
environment.
when
Chapter 1. Getting Started
1-9
Key Combinations
Key
Name
Num Lock
Scroll Lock
Volume Up
Volume
Down
Brightness
Up
Brightness
Down
Function
Makes the keypad in the middle of keyboard available.
Scrolls the screen up and down while the cursor position
does not change in some applications.
Increases the audio volume.
Decreases the audio volume.
Turns the LCD screen brighter.
Turns the LCD screen dimmer.
Key
Function
Screen Control Key
Moves to the screen above or below, or moves the cursor to the beginning or end
of the sentence.
Windows key
Display start menu.
Application Key
Provides the right button function of the touchpad.
1-10
Manual
Status
Indicators
Shows the operating status of the computer.
DescriptionNameIcon
Num Lock
Caps Lock
Scroll Lock
Hard Disk Drive /
CD Drive
Wireless LAN
Charger
Power
Turns on when the numeric keypad is activated.
Turns on when all alphabet characters you type will be
in upper case.
Turns on when it is set to scroll the screen up and down
while the cursor position does not change in some applications.
Blinks when the hard disk drive or CD drive is in operation.
Turns on when wireless LAN function is enabled.
(This light does not operate for the models without wireless LAN.)
Green- When the computer is operating on AC power and
the battery is fully charged
Amber - When the computer is operating on AC power and
the battery is being charged.
Off - When the computer is operating on battery power.
Turns on- when the computer is turned on.
Blinks- when the computer is in Standby mode.
Chapter 1. Getting Started
1-11
Adjusting LCD Brightness
There are 8 levels of LCD brightness (1:Dimmest~8:Brightest).
■
To adjust using keyboard
Press <Fn>+<> or <Fn>+<> keys from the keyboard to adjust LCD
brightness.
Whenever you turn the system on or change the power source the brightness
level changes according to the settings.
when operating on AC power: Brightness Level 8
when operating on battery power: Brightness Level 1
■
Adjusting the brightness using the Battery Manager
You can adjust the screen brightness using the Battery Manager. (P. 5-6)
Maintaining your LCD brightness settings after turning the system
NNNNooootttteeee
off and on
1. Turn the system on. When the Samsung Logo appears, press the <F2> key
to enter Setup.
2. In the Boot menu, change the Bright Mode Control option to UserControl.
3. Save the settings and exit Setup.
When using the Battery Manager, only the screen brightness set in 'Custom
Mode' is maintained.
To save the battery charge
When your computer is operating on battery power, adjusting the LCD
brightness level to dimmer diminishes the battery power consumption.
Bad pixels in the LCD
The limits of the LCD manufacturing technology allow a maximum of 10
abnormal or bad pixels, which do not affect system performance. This system
may have the same level of abnormal or bad pixels as any other company’s
products.
1-12
Manual
CCCCaaaauuuuttttiiiioooonn
Maintenance Instructions
nn
When cleaning the LCD panel, use only computer specific cleaners on a soft
cloth, and lightly wipe in one direction.
Adjusting the Volume
■
To adjust using keyboard
Press <Fn>+<> or <Fn>+<> from the keyboard.
■ Using the Volume Control Program
On the taskbar, click the Volume () icon, and adjust the slide bars.
For advanced volume control options, double-click the Volume () icon, and
adjust the settings in the [Master Volume] dialog.
CCCCaaaauuuuttttiiiioooonn
When you turn the system on, a booting noise may occur.
nn
Chapter 1. Getting Started
1-13
Proper Seating Posture During Computer Use
The proper seating posture during computer use is provided here.
Maintaining proper posture during computer use enhances performance
and prevents physical bodily harm.
If necessary, use a footrest to raise the level of your knees
and ease the pressure on the thighs.
Seating Posture
- Position the chair so that the eyes are slightly higher than the display
panel.
- Straighten the neck and back.
- Place the legs naturally.
- If necessary, use a cushion to provide extra back support.
- Avoid working postures that require twisting the body or neck.
1-14
Lighting
- Soft, indirect lighting is recommended.
- Position the display panel so that external light does not reflect off the
screen. Use curtains, if necessary.
Work Habits
- Take periodic breaks and stretch out stiff muscles regularly.
- Look outside the window or at distant objects frequently to relieve strain
on the eyes.
Manual
Chapter 2
Chapter 2
Introducing Windows
This chapter provides basic
information on using
the computer’s main
operating system
Windows.
SAMSUNG P10
Windows XP Basics
Windows is the computer’s main operating system, which needs to be
familiarized with in order for efficiently computer use.
Windows XP Tour
A tour of the elementary functions provided by Windows XP.
Click Start > Tour Windows XP.
Or click Start > All Programs > Accessories > Tour Windows XP.
Click on the topics to find out about important functions of Windows XP.
Click the Title.
2-2
An explanation will appear
on the lower part of the screen.
Manual
Desktop Icons
You can directly
launch a program.
Start Menu
Start Button
Understanding the Desktop
The Desktop is the working area on the computer. It consists of the large workspace,
which is more or less the entire the screen and a Taskbar at the bottom.
Recycle Bin
Language Bar
Taskbar
Start ButtonOpens the Start Menu.
System Tray with Clock
Taskbar
Displays programs that are currently running.
Frequently used icons can be placed here.
Recycle BinDeleted files or folders end up here.
Language Bar
Enables switching between English/other languages
text inputs and provides other text input services.
Chapter 2. Introducing Windows
2-3
Understanding the Start Menu
The Start Menu includes everything that is required to start Windows.
From the Start Menu it is possible to run a program, open a file, assign system users
with the Control Panel, receive support by clicking Help and Support, and search
desired items from computer or Internet by clicking Search.
Fixed Items
Internet Browser
Electronic Mail Program
List of Programs Last Used
The program item and location
may be changed.
Click This Button
to View the Start Menu
My Computer
Control Panel
Help and Support
Search
Run
This Folder Stores
Personal Documents
My Computer
Control Panel
Help and Support
Includes All Programs
Displays the contents of the hard disk, the CD-ROM
drive, the network drive, and floppy disks. It can
also be used to search and open files and folders.
Enables users to configure settings on the
computer.
Provides on-line help, information on Windows
and troubleshooting.
Enables users to search for information in files
or the Internet.
Runs programs or documents.
2-4
Manual
Title Bar
Menu Bar
Tool Bar
Quick Task Window
Understanding a Window
A window is the basic component in working with the computer. The My Computer
window, which is a window for the computer’s hard drive, will be used as an example here to show the basic composition of a window.
Click Start > My Computer.
Folder Icon
Close Window Button
Maximize Button
Minimize Button
Folders
Files
Double-click a shared
document or a local disk
to view the folders and
files in it.
Double-click the hard drive (local disk) to view internal folders and files stored in it. If
the contents do not appear, click Show Contents.
What is a Drive?A storage device in which files and folders are
NNNNooootttteeee
saved in, and read from.
What is a Folder?A folder is used to group and manage files
systematically, and may include files in sub-folders.
It is similar to a bookshelf.
What is a File?A file is a document or various kinds of material
that is generated as a result of program operation.
It is also called data.
To view the entire structure of the drive
Click the Folder Icon in the Toolbar to view the entire structure. Click again to
return to the Quick Task Window.
Chapter 2. Introducing Windows
2-5
Related help information
appears when a search
keyword is entered.
Help Topics
Help and Support Center
Help and Support Center provides references and troubleshooting information
regarding computer use.
Please refer to help and support centre before calling the Samsung helpline.
Click Start > Help and Support.
Displays Help Index
Connect to Support Center.
The computer has to be
connected to the Internet
Computer information
can be viewed and
the problem can be
diagnosed.
2-6
Troubleshooting Information
Manual
Document Operations
To create documents, WordPad or NotePad, which is included in
Windows, or a separate specialized word processor program can be
used, such as MS Word.
Instructions for creating documents using WordPad is provided here.
■ Creating a New Document
1. Click Start > All Programs > Accessories> WordPad
2. Create and edit your document. For more information about WordPad,
refer to on-line Help.
■ Saving a Document
1. Select File from the Menu, and click Save.
2. Click on the Save in field to specify a folder to save the file in, enter the name
of the file in the File Name field, and click Save.
Save Location
Enter File Name
Chapter 2. Introducing Windows
2-7
■ Opening a Document
1. Click Start > All programs > Accessories > WordPad.
2. Select File From the Menu, and click Open.
3. Click on the Look in field and specify the folder in which the file is saved.
4. Select the file to open and click Open.
■ Printing a Document
To print a document, connect a printer to the computer.
For more information about connecting and configuring a printer, please refer to
the printer manual.
To print a WordPad document
1. Turn on the printer, and insert paper.
2. Open the WordPad file to print.
3. Select File from the Menu and select Print.
4. Click Properties, adjust the printer options accordingly, and click OK.
5. In Print window, click OK to print the document.
2-8
Manual
Chapter 3
Chapter 3
Using The Computer
This chapter investigates various
different functions of the computer
and provides information
on using the related application
programs for them.
Using the CD-ROM Drive
This computer has one of the following CD drives.
- CD-ROM Drive Reads CDs.
- DVD-ROM Drive Reads CDs/DVDs.
- RW-Combo DriveRead a CD/DVD, and writes data onto a CD.
- DVD Super Multi Drive
A CD-ROM drive is optional. For more detailed product specifications, refer to the
NNNNooootttteeee
1. Press the eject button on right side of the CD drive.
2. When the tray slides out, place a CD onto it and push down until it clicks.
product catalog.
Reads CD/DVDs and writes data to CD/DVDs.
Supported DVD types include DVD±R, DVD±RW and
DVD-RAM.
3-2
Manual
3. Push the CD tray in gently. The CD will run automatically.
To eject a CD when the CD drive is out of order or the system is turned off, unfold
NNNNooootttteeee
CCCCaaaauuuuttttiiiioooonn
a paper clip, and insert the unfolded end of the clip into the hole () and
press until the CD tray opens.
To clean a CD or DVD title, clean the disc with a soft clean cloth by wiping from the
nn
center outwards.
Do not eject the CD while the Status Indicator is on.
Emergency Eject Hole
Eject Button
Status Indicator
Features
Using the Windows Media Player
Window Media Player enables you to play and manage audio and video files.
Click Start > Windows Media Player.
Or click Start > All Programs > Accessories > Entertainment > WindowsMedia Player.
Running the program the first time displays the set up screen. Define the settings
according to the instructions displayed on the screen.
When you complete the settings, the following screen appears.
Playlist pane
Playback Controls area
NNNNooootttteeee
To view detailed information on how to use Windows Media Player:
Run Windows Media Player and right-click over the Function Taskbar and select
Help > Windows Media Player Help
Chapter 3.Using The Computer
3-3
To Play an Audio CD
1. Insert an audio CD into the CD drive, and a list of all available players is
displayed automatically.
2. Select Windows Media Player, and click OK to play the audio CD.
To Play a Video CD
1. Insert a video CD into the CD drive.
2. When a video window appears, double-click the MPEGAV folder.
3. Double-click the DAT file.
4. When a warning window appears, click the Open with button.
5. In the new window, click Select Program from List and click OK.
6. Select the Windows Media Player, and click OK.
The video will start playing.
3-4
Manual
Loading...
+ 129 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.