COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE
TELETEXT
WISE LINK
(OPTION)
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■ View of Your Television (depending on the model) ....................................... 5
■ Infrared Remote Control (depending on the model) ...................................... 7
■ Inserting the Batteries in the Remote Control................................................ 9
■ Connecting to an Aerial or Cable Television Network ................................... 9
■ Switching Your Television On and Off........................................................... 10
■ Placing Your Television in Standby Mode ..................................................... 10
■ Becoming Familiar with the Remote Control ................................................. 11
■ Plug & Play Feature....................................................................................... 12
■ Viewing the Demonstration............................................................................ 13
■ Choosing Your Language.............................................................................. 13
◆ SETTING THE CHANNELS
■ Storing Channels Automatically..................................................................... 14
■ Sorting the Stored Channels ......................................................................... 15
■ Storing Channels Manually............................................................................ 16
■ Skipping Unwanted Channels ....................................................................... 18
■ Assigning Names to Channels ...................................................................... 19
■ Fine Tuning Channel Reception.................................................................... 20
◆ USING YOUR TELEVISION
■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ...... 21
■ Changing the Picture Standard ..................................................................... 21
■ Adjusting the Picture Settings........................................................................ 22
■ Selecting the Colour Tone ............................................................................. 23
■ Selecting the Picture Size (depending on the model).................................... 23
■ Extra Picture Settings .................................................................................... 24
■ Setting the Blue Screen................................................................................. 25
■ Using the Tilt Control Feature........................................................................ 25
■ Freezing the Current Picture ......................................................................... 26
■ Changing the Sound Standard ...................................................................... 26
■ Adjusting the Sound Settings ........................................................................ 27
■ Extra Sound Settings (depending on the model)........................................... 28
■ Selecting the Melody ..................................................................................... 29
■ Selecting the Sound Mode (depending on the model) .................................. 30
■ Setting and Displaying the Current Time....................................................... 31
■ Setting the Sleep Timer ................................................................................. 32
■ Switching the Television On and Off Automatically ....................................... 33
■ Setting the Preferred Volume Level/Channel ................................................ 34
■ Viewing an External Signal Source/Edit Name (depending on the model).... 35
■ Viewing the Picture In Picture (PIP) (depending on the model) .................... 36
English - 3
Contents (continued)
◆ USING THE WISE LINK (DEPENDING ON THE MODEL)
■ Using Wise Link (depending on the model)................................................... 38
■ Switching to WISE LINK Mode (depending on the model)............................ 40
■
Selecting Image (JPEG) Files/Music (MP3) Files (depending on the model)
■ Picture (JPEG) Playback (depending on the model) ..................................... 42
■ Rotating the Picture (JPEG) (depending on the model) ................................ 43
■ Picture Zoom (JPEG) (depending on the model) .......................................... 43
■ Music File (MP3) Playback (depending on the model) .................................. 44
■ Playback All JPEG/MP3 Files (depending on the model).............................. 45
■ WISE LINK Menu Setup (depending on the model)...................................... 46
◆ USING THE TELETEXT FEATURE
■ Teletext Feature ............................................................................................ 48
■ Displaying the Teletext Information ............................................................... 48
■ Selecting a Page by Number......................................................................... 49
■ Using FLOF to Select a Page........................................................................ 50
■ Storing Teletext Pages .................................................................................. 50
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■ Connecting to the External Input/Outputs...................................................... 51
■ Connecting to the Audio Output .................................................................... 51
■ Connecting to the RCA Input......................................................................... 52
■ Connecting to the S-Video Input.................................................................... 52
■ Viewing Pictures From External Sources ...................................................... 53
........... 41
◆ RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Colour Patches....................................... 53
■ Troubleshooting: Before Contacting Service Personnel................................ 54
Symbols
Press Important Note
English - 4
☛
➢
View of Your Television (depending on the model)
1
2
3
4567
11
810 9
1
2
3
4
5
6
7
The actual configuration on your TV may be different, depending on
➢
your model.
Control Panels
1) Standby Indicator
2) Remote Control Sensor
3) Power On/Off
4) Channel Selection
W.LINK Mode
8) Move Button
9) Select Button
Using the WISE LINK Buttons
➢
◆ Memory Card Slot: Insert the memory card into the slot.
◆ EXIT: Used to move to the previous page.
◆ ENTER: Used to execute the selected item.
◆ MOVE: Used to move between items.
You can use the Volume button on the remote control to control the volume
☛
while in Wise Link mode. (You cannot control the volume on the front
control panel of TV)
5) Volume Adjustment
6) Menu Display
7) Input Source Selection
10) Previous Button
11) Memory Card Slot
English - 5
View of Your Television (depending on the model) (continued)
Connection Panels
Side of the TV
Audio Input (R, L)
Video Input
S-Video Input
Rear of the TV
SCART Audio/
Video Input/Output
Monitor Audio Output
75Ω Coaxial Connector for Aerial/Cable Network
English - 6
Infrared Remote Control (depending on the model)
TELEVISION STAND-BY
PICTURE SIZE SELECTION
SOUND MODE SELECTION
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
MENU DISPLAY
MOVE TO THE REQUIRED
ADJUST AN OPTION VALUE
MENU OPTION/
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
AUTOMATIC SWITCH-OFF
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
INFORMATION DISPLAY
SETUP MENU DISPLAY(W.LINK)
(depending on the model)
EXIT FROM ANY DISPLAY
RETURN TO PREVIOUS MENU(W.LINK)
(depending on the model)
CHANGE CONFIRMATION
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
DNIe ON/OFF/DEMO
➢
W.LINK FUNCTION:
- ROTATE
- ZOOM
- REWIND
- STOP
- PLAY/PAUSE
- FASR FORWARD
- W.LINK: TOGGLES BETWEEN WISE
LINK AND TV MODE.
The performance of the remote control may be affected by bright light.
(depending on the model)
English - 7
Infrared Remote Control (depending on the model) (continued)
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
TELETEXT SIZE SELECTION
AND THE NORMAL BROADCAST
TELETEXT SUB-PAGE
TELETEXT PAGE HOLD
SUB PICTURE(PIP)
NEXT CHANNEL
PIP ON/OFF
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
TELETEXT STORE
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT PREVIOUS PAGE
P
P
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS
CHANNEL
FASTEXT TOPIC SELECTION
SUB PICTURE(PIP)
SOURCE SELECTION
English - 8
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP)
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆-on the battery against -on the remote control
◆+on the battery against +on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically ” on page 14
◆ “Storing Channels Manually” on page 16
Rear of the TV
or
Cable Television
Network
English - 9
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
➢
and the frequency is 50 or 60Hz.
2
Press the “”button (On/Off) on the front of the television.
Result
: The Standby indicator on the front of the television
lights up.
3
Press the POWER ( ) button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
➢
appears. Refer to “Storing Channels Automatically” on page
14 or “Storing Channels Manually” on page 16.
4
To switch your television off, press the “”button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result
: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER ()
button again.
You can also switch on by pressing the P or button.
➢
Do not leave your television in Standby mode for long
☛
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
English - 10
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next
stored channel.
Used to display the previous
stored channel.
to Used to display the corresponding channels.
-/--
PRE-CH Press the PRE-CH button. The TV will switch to the last
MUTE Used to switch the sound off temporarily.
Used to select a channel numbered ten or over.
Press this button, and the “
Enter the two-digit channel number.
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the
alternate between them.
Used to increase the
volume.
Used to decrease the
volume.
To turn the sound back on, press this button again, or
➢
press the or button.
-
-
--
” symbol is displayed.
PRE-CH button to quickly
-
-
MENU Used to display the Used to return to the previous
EXIT
TV Used to switch the Used to exit from the menu
on-screen menu system. menu or normal viewing.
-
-
-
television on when it is system and return to normal
in Standby mode. viewing directly
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
Used to confirm your choice.
Used to exit from the menu
system and return to normal
viewing directly.
English - 11
Plug & Play Feature
Plug & Play
TV
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ППЛУИО¿
Move Skip
Check antenna input.
œœ √√
Language
âe‰tina
Srpski
Hrvatski
Român™
Magyar
Polski
кЫТТНЛИ
Å˙΄‡ÒÍË
Türkçe
Move Skip
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2
Select the appropriate language by pressing the ▼ or ▲ button.
Press the
Result
➢
3
Make sure that the antenna is connected to the TV.
Press the
Result
MENU ( ) button to enter the language.
: The message Check antenna input. is displayed.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
œ or √ button.
: The Auto Store menu is displayed with Country is
selected.
TV
Move
TV
Move
TV
Move
Auto Store
œœ
Country
Search : -/+
Clock -- : --
Sleep Timer : Off
On Timer -- : -- Off
Off Timer -- : -- Off
On Timer Volume : 0
On Timer Channel : P 1
Enjoy your watching.
Plug & Play
Language : English
Time
Blue Screen : Off
Melody : 0n
Demonstration
UK
œœ √√
Adjust Skip
Time
œœ √√
Adjust Skip
Setup
œœ √√
Enter Return
4
Select your country by pressing the œ or √ button. To search the
√√
channels, select
press the
Search by pressing the ▼ or ▲ button, and then
œ or √ button. Press the MENU ( ) button to stop the
search.
Result
: The Time menu is displayed with Clock is selected.
Refer to “Storing Channels Automatically” on page 14.
➢
5
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the
Refer to “Setting and Displaying the Current Time” on page
➢
31.
6
When you have finished, press the MENU ( ) button.
Result
: The message Enjoy your watching. is displayed,
▼ or ▲ button.
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1 Press the MENU ( ) button.
2 Press the ▼ or ▲ button to select Setup , and then press the
œ or √ button.
Result
: The Plug & Play is selected.
√√
√√
√√
3 Press the œ or √ button again.
Result
: This feature starts with the message Plug & Play
is displayed.
When you wish to exit from the Plug & Play, press
➢
the EXIT ( ) button on the remote control.
English - 12
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Demonstration.
5
Press the œ or √ button.
Result
: Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
➢
EXIT ( ) button on the remote control.
TV
Plug & Play
Language : English
Time
Blue Screen : Off
Melody : 0n
Demonstration
Move
Setup
œœ √√
Enter Return
√√
√√
√√
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Language.
5
Press the œ or √ button.
6
Select the appropriate language by pressing the ▼ or ▲ button
repeatedly.
TV
Plug & Play
LanguageœœEnglish
Time
Blue Screen : Off
Melody : 0n
Demonstration
Move
TV
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ППЛУИО¿
Move Return
Setup
œœ √√
Enter Return
Language
âe‰tina
Srpski
Hrvatski
Român™
Magyar
Polski
кЫТТНЛИ
Å˙΄‡ÒÍË
Türkçe
√√
√√
√√
√√
English - 13
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
More
Move
TV
Move
TV
œœ √√
Enter Return
Auto Store
Country
Search : -/+
œœ √√
Adjust Return
Auto Store
Country : UK
Search
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
Channel
œœ
UK
œœ
-/+
√√
√√
√√
√√
√√
√√
√√
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
Result
: The Auto Store is selected.
4
Press the œ or √ button again.
Result
: The options available in the Auto Store group are
displayed with
5
Select your country by pressing the œ or √ button. The countries
are displayed in the following order:
Deutschland-España-France-Italia-Nederland
Schweiz-Sverige-UK-Eastren Europe
Country is selected.
Others-Belgie
-
-
Move
P 1 C-- ----106 MHz 7 %
Return
TV
Move
œœ √√
Search Return
Sort
œœ
From
To : P-- -----
Store : ?
P 1 -----
œœ √√
Adjust Return
6
Press the ▼ or ▲ button to select Search.
7
Press the œ or √ button to start the search.
Result
: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢ To stop the search before it has finished, press the MENU
( ) button.
8
When searching and storing are complete, the Sort menu is
displayed.
◆
To sort the stored channels into the desired numerical order,
go to Step
on page 15.
◆
To exit from the channel store function without sorting the
channels, press the
√√
9
menus disappear.
When the channels have been stored, you can:
◆
Sort them in the order required (refer to page 15)
◆
Clear a channel (refer to page 18)
◆
Assign a name to the stored channels (refer to page 19)
◆
Fine tune channel reception if necessary (refer to page 20)
◆
Activate the Digital Noise Reduction feature (refer to page 24)
6 of the “Sorting the Stored Channels” procedure
MENU ( ) button repeatedly until the
English - 14
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Sort.
5
Press the œ or √ button.
Result
: The options available in the Sort group are displayed
with
From is selected.
6
Select the channel number that you wish to change by pressing
the
œ or √ button repeatedly.
7
Press the ▼ or ▲ button to select To. Select the new channel
number which you wish to identify by pressing the
repeatedly.
You can also select the channel number directly by pressing
➢
the numeric buttons (0~9).
œ or √ button
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
More
Move
TV
Move
TV
œœ √√
Enter Return
From
To : P-- -----
Store : ?
From : P 1 -----
To
Store : ?
œœ
œœ √√
Adjust Return
œœ
Channel
Sort
P 1 -----
Sort
P 3 -----
√√
√√
√√
√√
√√
√√
√√
8
Press the ▼ or ▲ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the
Result
:
The selected channel is exchanged with the one
œ or √ button.
previously stored to the chosen number.
9
For all the channels to move to the required channel numbers,
repeat steps
6 to 8 after selecting the From by pressing the ▼ or ▲
button.
Move
TV
Move
œœ √√
Adjust Return
From : P 3 -----
To : P 1 -----
Store
œœ
œœ √√
Adjust Return
Sort
OK
√√
English - 15
Storing Channels Manually
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
Move
TV
Programme
Colour System : AUTO
Sound System : DK
Search : 0MHz
Channel : C--
Store : ?
Move
TV
Programme : P 1-----
Colour System
Sound System : DK
Search : 0MHz
Channel : C--
Store : ?
Move
TV
Programme : P 1-----
Colour System : AUTO
Sound System
Search : 0MHz
Channel : C--
Store : ?
Move
Channel
More
œœ √√
Enter Return
Manual Store
œœ √√
Adjust Return
Manual Store
œœ √√
Adjust Return
Manual Store
œœ √√
Adjust Return
œœ
P 1-----
œœ
œœ
AUTO
DK
You can store up to 100 television channels, including those
received via cable networks.
√√
√√
√√
√√
√√
√√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Manual Store.
5
Press the œ or √ button.
Result
: The options available in the Manual Store group are
displayed with
√√
6
To assign a programme number to a channel, press the œ or √
Programme is selected.
button.
7
Press the ▼ or ▲ button to select Colour System. Indicate the
broadcasting standard required by pressing the
œ or √ button
repeatedly.
Result
: The colour standards are displayed in the following
order:
AUTO-PAL-SECAM-NT4.43.
8
Press the ▼ or ▲ button to select Sound System. Select the
√√
sound standard required by pressing the
Result
: The sound standards are displayed in the following
œ or √ button repeatedly.
order:
BG-DK-I-L.
English - 16
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
◆
Press the ▼ or ▲ button to select Channel.
◆
Press the √ button.
◆
Press the ▼ or ▲ button to select C (Air channel) or S (Cable
channel).
◆
Press the √ button.
◆
Press the ▼ or ▲ button to select indicate the required
number.
You can also select the channel number directly by
➢
pressing the numeric buttons (0~9).
If no sound or abnormal sound, re-select the sound standard
➢
required.
10
If you do not know the channel numbers, select Search by
pressing the
search.
Result
11
To store the channel and associated programme number, select
Store by pressing the ▼ or ▲ button. Press the œ or √ button to
select
12
Repeat Steps 9 to 11 for each channel to be stored.
▼ or ▲ button. Press the œ or √ button to start the
: The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
OK.
TV
Adjust
TV
Move
TV
Move
Manual Store
Programme : P 1-----
Colour System : AUTO
Sound System : DK
Search : 0MHz
Channel
Store : ?
œœ √√
Move Return
Manual Store
Programme : P 1-----
Colour System : AUTO
Sound System : DK
Search
Channel : C 1
Store : ?
œœ √√
Search Return
Manual Store
Programme : P 1-----
Colour System : AUTO
Sound System : DK
Search : 46MHz
Channel : C 1
Store
œœ √√
Adjust Return
œœ
œœ
œœ
C 1
46MHz
OK
√√
√√
√√
Channel mode
☛
◆ P (Programme mode):
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode):
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode):
entering the assigned number for each cable channel in this
mode.
When completing tuning, the
You can select a channel by
You can select a channel by
English - 17
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
Move
TV
P 1
P 2 : Added
P 3 : Added
P 4 : Added
Move
Skipping Unwanted Channels
Channel
More
œœ √√
Enter Return
Add/Delete
œœ
Added
œœ √√
Adjust Return
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
√√
√√
√√
√√
√√
√√
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Add/Delete.
5
Press the œ or √ button.
Result
:
The stored channels are displayed.
TV
P 1
P 2 : Added
P 3 : Added
P 4 : Added
Move
Add/Delete
œœ
Deleted
œœ √√
Adjust Return
6
Press the ▼ or ▲ button to select the channel to add or erase.
√√
If necessary, select
button.
7
Repeat Step 6 for each channel to be added or erased.
Added or Deleted by pressing the œ or √
English - 18
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Name.
5
Press the œ or √ button.
Result
: The current channels are displayed.
TV
Auto Store
Manual Store
Add/Delete
Sort
Name
††
Move
TV
P 1
P 2 : -----
P 3 : -----
P 4 : -----
Channel
More
œœ √√
Enter Return
Name
œœ
-----
√√
√√
√√
√√
√√
√√
6
If necessary, select the channel to be assigned to a new name by
pressing the
7
Press the œ or √ button.
8
Press the ▼ or ▲ button to select a letter (A~Z), a number (0~9) or
a symbol (
pressing the
9
Repeat Steps 6to 8for each channel to be assigned to a new
▼ or ▲ button.
-
, space). Move on the previous or next letter by
œ or √ button.
name.
Move
TV Name
Adjust
œœ √√
Adjust Return
œœ
P 1
P 2 : -----
P 3 : -----
P 4 : -----
A
œœ √√
Move Return
√√
English - 19
Fine Tuning Channel Reception
TV
……
Fine Tune
LNA : On
Move
Fine Tune P 1
Channel
More
œœ √√
Enter Return
Reset
Move Save
œœ √√
Adjust Return
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
√√
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
1
4
Press the ▼ or ▲ button to select Fine Tune.
5
Press the œ or √ button.
6
To obtain a sharp and clear picture and good sound quality, press
the
œ or √ button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or √ button.
7
To store the fine tuning setting in the TV’s memory, press the
ENTER ( ) button.
Result
: Channel indicator turns into Red.
8
To erase adjusted picture or sound, select Reset by pressing the
▼ or ▲ button. Press the ENTER ( ) button.
Result
: Channel indicator returns to its original colour.
English - 20
Using the LNA (Low Noise Amplifier) feature (depending on the model)
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
and that is memorized on current channel, additional.
1
Press the MENU
Result
: The main menu is displayed.
()
button.
TV
……
More
Fine Tune
LNA
Channel
√√
œœOn√√
2
Press the ▼ or ▲ button to select Channel.
Result
: The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select LNA.
5
To activate this feature, select On by pressing the œ or √ button.
Setting the LNA option to “On” may produce worse picture
➢
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Picture.
Result
:
The options available in the
displayed.
Picture
group are
Move
TV
Move
œœ √√
Adjust Return
Picture
Mode
Custom
Colour Tone : Normal
Size : Auto Wide
Scan Mode : Natural
††
More
œœ
œœ √√
Adjust Return
Dynamic
√√
√√
3
Press the œ or √ button.
Result
4
Select the required picture effect by pressing the œ or √ button
The
Mode
:
is selected.
repeatedly.
Result
: The following picture effects are available:
Dynamic-Standard-Movie-Custom.
You can also set these options simply by pressing the
➢
P.MODE
()
(Picture Mode) button.
English - 21
Adjusting the Picture Settings
TV
Mode : Dynamic
Custom
Colour Tone : Normal
Size : Auto Wide
Scan Mode : Natural
††
More
Move
TV
Contrast
Brightness : 55
Sharpness : 50
Colour : 50
Move
Contrast 70
Picture
œœ √√
Enter Return
Custom
œœ
70
œœ √√
Adjust Return
Your television has several settings which allow you to control
picture quality.
1
√√
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Picture.
Result
:
The options available in the
Picture
group are
displayed.
3
Press the œ or √ button.
4
√√
Press the ▼ or ▲ button to select Custom.
5
Press the œ or √ button.
Result
: The options available in the Custom group are
displayed.
6
Press the ▼ or ▲ button to select the option (Contrast,
Brightness, Sharpness, Colour or Tint -NTSC only) to be
adjusted. Press the
Result
: The horizontal bar is displayed. Move the horizontal
œ or √ button.
bar’s cursor left or right by pressing the
œ or √
button.
◆ If you make any changes to these settings, the picture
➢
standard is automatically switched to
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 53.)
Custom.
English - 22
Selecting the Colour Tone
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Picture.
Result
:
The options available in the
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Colour Tone.
Picture
group are
TV
Mode : Dynamic
Custom
Colour ToneœœNormal
Size : Auto Wide
Scan Mode : Natural
††
More
Move
Picture
œœ √√
Enter Return
√√
√√
5
Press the œ or √ button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or √
button. ( Warm 1 ~ Warm 10 - Normal - Cool 1 ~
Cool 10 ).
Selecting the Picture Size (depending on the model)
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE
Depending on the model, the following picture sizes are available:
◆ Normal, Zoom1 , Zoom2, 16:9
◆ 16:9, Panorama , Zoom1, Zoom2, 4:3, Auto Wide
Lifting is available in the Zoom1 or Zoom2 mode by
➢
pressing the
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
▼ or ▲ button.
()
” button.
Colour Tone Normal
TV
Mode : Dynamic
Custom
Colour Tone : Normal
Size
Scan Mode : Natural
††
More
Move
Picture
œœ
œœ √√
Adjust Return
Auto Wide
√√
√√
2
Press the ▼ or ▲ button to select Picture.
Result
:
The options available in the
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Size.
5
Press the œ or √ button to select the picture size.
Picture
group are
English - 23
Extra Picture Settings
TV
Mode : Dynamic
Custom
Colour Tone : Normal
Size : Auto Wide
Scan Mode
††
More
Move
TV
……
More
Digital NR
DNIe : On
Tilt : 0
PIP
Move
Picture
œœ
œœ √√
Adjust Return
Picture
œœ √√
Adjust Return
Natural
œœ
On
◆ Scan Mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
√√
changing the scan mode.
Natural, Digital and
Progressive modes are available.
√√
◆ Digital NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
◆ DNIe (Digital Natural Image engine )
√√
This feature bring you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and
√√
white enhancement. New image compensation Algorithm
gives brighter, clearer, much detailed image to you.
DNIeTMtechnology will fit every signals into your eyes.
TV
……
More
Digital NR : On
DNIe
Tilt : 0
PIP
Move
œœ √√
Adjust Return
Picture
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
œœ
On
√√
√√
Press the ▼ or ▲ button to select Picture.
Result
:
The options available in the
Picture
group are
displayed.
3
Press the œ or √ button.
4
Select the required option ( Scan Mode, Digital NR, or DNIe) by
pressing the
5
Press the œ or √ button to change the setting.
◆
Scan Mode : Natural, Digital or Progressive
◆
Digital NR : Off or On (activating)
◆
DNIe : Off, Demo or On (activating)
▼ or ▲ button.
You can also set these options simply by
➢
pressing the
DNIe button.
English - 24
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Blue Screen.
5
To activate this feature, select On by pressing the œ or √ button.
TV
Plug & Play
Language : English
Time
Blue Screen
Melody : On
Demonstration
Move
Setup
œœ √√
Adjust Return
√√
√√
œœ
√√
On
√√
Using the Tilt Control Feature
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Picture.
Result
:
The options available in the
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Tilt.
5
Press the œ or √ button to reach the required setting (-7 to +7).
Picture
group are
TV
……
Digital NR : On
DNIe : On
Tilt
PIP
Move
Picture
More
œœ √√
Adjust Return
œœ
√√
0
√√
English - 25
Freezing the Current Picture
Changing the Sound Standard
TV
Mode
Equalizer
Auto Volume : Off
Dolby Virtual : Off
Turbo Sound : Off
Pseudo Stereo : Off
Move
Sound
œœ
Custom
œœ √√
Adjust Return
You can freeze the picture when watching a television programme
simply by pressing the “STILL
To return to normal viewing, press this button again.
➢
You can select the type of special sound effect to be used when
watching a given broadcast.
√√
√√
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Sound.
Result
: The options available in the Sound group are
displayed.
()
” button.
English - 26
3
Press the œ or √ button.
Result
:
The
Mode
is selected.
4
Select the required sound effect by pressing the œ or √ button
repeatedly.
Result
: The following sound effects are available:
Standard-Music-Movie-Speech(SVE)-Custom.
◆
SVE : SAMSUNG Voice Enhancement Technic
You can also set these options simply by pressing the
➢
S.MODE
()
(Sound Mode) button.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Sound.
Result
: The options available in the Sound group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Equalizer.
5
Press the œ or √ button.
Result
: The options available in the Equalizer group are
displayed.
You can also display this group simply by pressing the
➢
S.MENU (Sound Menu) button.
6
Select the option to be adjusted by pressing the œ or √ button.
Press the
➢
▼ or ▲ button to reach the required setting.
If you make any changes to these settings, the sound
standard is automatically switched to
Custom.
TV
Mode : Custom
Equalizer
Auto Volume : Off
Dolby Virtual : Off
Turbo Sound : Off
Pseudo Stereo : Off
Move
Adjust
Sound
œœ √√
Enter Return
EqualizerTV
R
L
100 300 1K 3K 10K
œœ √√
Move Return
√√
English - 27
Extra Sound Settings (depending on the model)
TV
Mode : Custom
Equalizer
Auto Volume
Dolby Virtual : Off
Turbo Sound : Off
Pseudo Stereo : Off
Move
TV
Mode : Custom
Equalizer
Auto Volume : Off
Dolby Virtual
Turbo Sound : Off
Pseudo Stereo : Off
Move
TV
Mode : Custom
Equalizer
Auto Volume : Off
Dolby Virtual : Off
Turbo Sound
Pseudo Stereo : Off
Move
TV
Mode : Custom
Equalizer
Auto Volume : Off
Dolby Virtual : Off
Turbo Sound : Off
Pseudo Stereo
Move
Sound
œœ √√
Adjust Return
Sound
œœ √√
Adjust Return
Sound
œœ √√
Adjust Return
Sound
œœ √√
Adjust Return
◆ Auto Volume
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
√√
œœ
√√
On
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
◆ Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channel simply by pressing the
√√
œœ
√√
On
TURBO button.
◆ Pseudo Stereo / Dolby Virtual
Pseudo stereo feature converts a monaural sound signal
into two identical left and right channels.
Once the Pseudo Stereo or Dolby Virtual is set to On
or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech(SVE).
√√
1
œœ
√√
On
Press the MENU
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Sound.
Result
: The options available in the Sound group are
()
button.
displayed.
3
√√
Press the œ or √ button.
4
Select the required option (Auto Volume, Dolby Virtual,
Turbo Sound or Pseudo Stereo) by pressing the ▼ or ▲
œœ
√√
On
button.
5
To activate each feature, select On by pressing the œ or √ button.
English - 28
Manufactured under license from
➢
Dolby Laboratories.
“Dolby” and the double-D symbol
are trademarks of Dolby
Laboratories.
Selecting the Melody
The sound settings can be adjusted to suit your personal preferences.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Melody.
5
To activate this feature, select On by pressing the œ or √ button.
TV
Plug & Play
Language : English
Time
Blue Screen : On
Melody
Demonstration
Move
Setup
œœ √√
Adjust Return
√√
√√
œœ
√√
On
√√
English - 29
Selecting the Sound Mode (depending on the model)
The “DUAL
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “STEREO”, depending on
the current transmission.
NICAM
Stereo
A2
Stereo
I-II”
button displays/controls the processing and output
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
(Normal use)
MONO
MONO ↔ MONO
NICAM (Normal)
STEREO ↔ MONO
NICAM (Normal)
DUAL-I → DUAL-
NICAM NICAM (Normal)
→
MONO (Normal use)
DUAL-I↔ DUAL-
STEREO ↔ MONO
II
(Forced mono)
→ Mono
→
II
◆ If the receiving conditions deteriorate, listening will be
➢
easier if the mode is set to the
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the
DUAL
MONO.
I-II
MONO.
button.
English - 30
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO
you wish to use the automatic on or off timers.
When pressing the “” button (On/Off) on the front of
➢
the television, the clock setting will be reset.
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Time.
5
Press the œ or √ button.
Result
: The Clock is selected.
()
displayed.
” button. You must also set the time if
TV
Plug & Play
Language : English
Time
Blue Screen : On
Melody : On
Demonstration
Move
TV
Clock -- : --
Sleep Timer : Off
On Timer -- : -- Off
Off Timer -- : -- Off
On Timer Volume : 0
On Timer Channel : P 1
Move
Setup
œœ √√
Enter Return
Time
œœ √√
Adjust Return
√√
√√
√√
6
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the
7
When you have finished, press the EXIT ( ) button to exit.
8
Press the INFO ( ) button to display the channel information and
▼ or ▲ button.
the current time.
TV
Clock 11 : 00
Sleep Timer : Off
On Timer -- : -- Off
Off Timer -- : -- Off
On Timer Volume : 0
On Timer Channel : P 1
Adjust
Time
œœ √√
Move Return
English - 31
Setting the Sleep Timer
TV
Plug & Play
Language : English
Time
Blue Screen : On
Melody : On
Demonstration
Move
TV
Clock 11 : 00
Sleep Timer
On Timer -- : -- Off
Off Timer -- : -- Off
On Timer Volume : 0
On Timer Channel : P 1
Move
Setup
œœ √√
Enter Return
Time
œœ √√
Adjust Return
œœ 30√√
You can set your TV to automatically turn off after a preset
interval.
√√
√√
√√
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Time.
5
Press the œ or √ button.
Result
: The Clock is selected.
6
Press the ▼ or ▲ button to select Sleep Timer.
7
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the
œ or √ button.
You can select a time period of between 30 and 180 minutes
➢
after the television automatically switches to Standby mode
by pressing the
SLEEP ( ) button.
English - 32
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
The first step is to set the television’s clock (refer to
➢
“Setting and Displaying the Current Time” on the page
31). If you have not yet set the clock, the message
the clock first
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
is displayed.
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Time.
Set
TV
Plug & Play
Language : English
Time
Blue Screen : On
Melody : On
Demonstration
Move
TV
Adjust
œœ √√
Clock 11 : 00
Sleep Timer : 30
On Timer 06 : 00 On
Off Timer -- : -- Off
On Timer Volume : 0
On Timer Channel : P 1
œœ √√
Setup
√√
√√
√√
Enter Return
Time
Move Return
5
Press the œ or √ button.
Result
: The Clock is selected.
6
Press the ▼ or ▲ button to select On Timer. Set the time at which
you wish the television to be switched on automatically.
◆
Press the œ or √ button to move to the hour or minute.
Set these by pressing the
◆
Press the œ or √ button to move Off and then, press the ▼ or
▼ or ▲ button.
▲ button to select On.
7
Press the ▼ or ▲ button to select Off Timer. In the same above,
set the time at which you wish the television to be switched off
automatically.
Absent Power Off
➢
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On”
(when you are away on holiday, for example).
TV
Clock 11 : 00
Sleep Timer : 30
On Timer 06 : 00 On
Off Timer 11 : 00 On
On Timer Volume : 0
On Timer Channel : P 1
Adjust
Time
œœ √√
Move Return
English - 33
Setting the Preferred Volume Level/Channel
TV
Plug & Play
Language : English
Time
Blue Screen : On
Melody : On
Demonstration
Move
TV
Clock 11 : 00
Sleep Timer : 30
On Timer 06 : 00 On
Off Timer -- : -- Off
On Timer Volume
On Timer Channel : P 1
Move
TV
Clock 11 : 00
Sleep Timer : 30
On Timer 06 : 00 On
Off Timer 11 : 00 On
On Timer Volume : 10
On Timer Channel
Setup
œœ √√
Enter Return
Time
œœ √√
Adjust Return
Time
The preferred volume and channel can be set for when the timer
automatically turns on the TV.
√√
√√
√√
1
Press the MENU ( ) button.
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Time
5
Press the œ or √ button.
Result
œœ
√√
10
6
7
8
9
œœ
√√
P 1
: The Clock is selected.
Press the ▼ or ▲ button to select On Timer Volume.
Press the œ or √ button to adjust volume level.
Press the ▼ or ▲ button to select On Timer Channel.
Press the œ or √ button to select the channel.
Move
œœ √√
Adjust Return
English - 34
Viewing an External Signal Source/Edit Name (depending on the model)
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
1
Press the MENU
Result
: The main menu is displayed.
2
Press the œ or √ button to select Input.
Result
: The options available in the Input group are
()
button.
displayed.
3
Press the œ or √ button again to select Source List.
Result
: The options available in the Source List group are
displayed.
4
Press the ▼ or ▲ button to select signal source, then press the
œ or √ button.
When you connect equipment to the TV, you can choose
➢
between the following sets of jacks :
TV’s rear panel, and
You can also set these options simply by pressing the
➢
SOURCE ()
EXT3/S-Video on the TV’s side panel.
button. If you change the external
EXT1 or EXT2 on the
source while viewing, pictures might take a short period of
time to be switched.
TV
Source List : TV
Edit Name
Move
TV
TV
WISE LINK
EXT1 : -----EXT2 : -----EXT3/S-Video : ------
Move
TV
Source List : TV
Edit Name
Input
œœ √√
Enter Return
Source List
œœ √√
Enter Return
Input
√√
√√
√√
√√
Edit Name
1
Press the MENU
Result
: The main menu is displayed.
2
Press the œ or √ button to select Input.
Result
: The options available in the Input group are
()
button.
displayed.
3
Press the ▼ or ▲ button to select Edit Name . Press the œ or √
button.
Result
: The options available in the Edit Name group are
displayed.
4
Press the ▼ or ▲ button to select external device :
EXT1-EXT2-EXT3-S-Video.
5
Press the œ or √ button.
6
Select the name by pressing the ➛or ❿ button.
7
Set other signal sources (EXT1, EXT2 , EXT3, S-Video) using the
same method as listed above.
Move
TV
Move
TV
Move
œœ √√
Enter Return
EXT1
EXT2 : -----EXT3 : -----S-Video : ------
œœ √√
Adjust Return
EXT1
EXT2 : -----EXT3 : -----S-Video : ------
œœ √√
Adjust Return
Edit Name
œœ
------
Edit Name
œœ
DVD
√√
√√
English - 35
TV
……
Digital NR : On
DNIe : On
Tilt : 0
PIP
Move
TV
PIP
Move
TV
PIP : On
Source
Swap
Size : Large
Position :
Programme : P 1
Move
TV
PIP : On
Source : TV
Swap
Size : Large
Position :
Programme : P 1
Move
Picture
More
œœ √√
Enter Return
œœ √√
Adjust Return
œœ √√
Adjust Return
œœ √√
Enter Return
Viewing the Picture In Picture (PIP) (depending on the model)
You can display a sub picture within the main picture of TV program
or external A/V devices such as VCR or DVD. In this way you can
watch TV program or monitor the video input from any connected
devices while watching TV or other video input.
()
button.
displayed.
TV-EXT1-EXT2-EXT3/S-Video
PIP
PIP
1
√√
PIP
œœ
Off
√√
Press the MENU
Result
: The main menu is displayed.
2
Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select PIP. Press the œ or √ button.
5
Press the ➛or ❿ button to On .
Result
: The options available in the PIP group are displayed.
You can also activate the PIP simply by pressing the PIP
➢
button. To deactivate, press it again.
6
œœ
TV
√√
√√
Press the ▼ or ▲ button to select Source.
7
Press the ➛or ❿ button to select a source of sub picture.
Result
: The sources are displayed in the following order:
In some PIP TV models, the PIP function will not operate if
➢
the same source to the main picture is selected for the subpicture. When a TV channel is viewed on the main picture,
PIP is not available for TV channels. If a TV source is
selected, the message "Not available" will appear on the
screen. The PIP picture can be viewed only when a source
√√
different from the main picture's is selected in the PIP
window.
You can also set these options simply by pressing the
➢
SOURCE button.
8
Press the ▼ or ▲ button to select Swap.
English - 36
9
Press the ➛or ❿ button.
Result
: The main picture and the sub picture are
You can also interchange the main picture and the sub
➢
picture simply by pressing the
interchanged.
SWAP
()
button.
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
10
Press the ▼ or ▲ button to select Size.
11
Select a size of sub picture by pressing the ➛or ❿ button.
Result
: The sizes are displayed in the following order:
Large-Small-Double Window-16 PIP.
◆
➢
16 PIP : You can view up to 16 memorized channels
on the sub picture spontaneously.
◆
On the condition of 16 PIP, it is impossible to execute
Swap, STILL and Position.
You can select these options simply by pressing the SIZE
➢
button.
12
Press the ▼ or ▲ button to select Position.
13
Press the œ or √ button.
Result
: The positions available are displayed.
---
You can select these options simply by pressing the
➢
Position ( ) button.
14
Press the † or … button to select Programme. You can select the
channel that you want to view through sub picture by pressing the
œ or √ button.
◆ When the Source is set to TV, you can select the
➢
channel of sub picture.
◆ You can select the channel of the sub picture simply by
pressing the
† or … button.
Easy functions of remote control
Buttons Feature
PIP Used to activate or deactivate the PIP function directly.
TV
PIP : On
Source : TV
Swap
Size
Position :
Programme : P 1
Move
TV
PIP : On
Source : TV
Swap
Size : Large
Position
Programme : P 1
Move
TV
PIP : On
Source : TV
Swap
Size : Large
Position :
Programme
Move
PIP
œœ
Large
œœ √√
Adjust Return
PIP
œœ
œœ √√
Adjust Return
PIP
œœ
P 1
œœ √√
Adjust Return
√√
√√
√√
√√
√√
√√
SWAP Used to interchange the main picture and the sub picture.
When the main picture is in the Video mode and the
➢
sub picture is in the TV mode, you might not hear the
sound of main picture when pressing the
SWAP
()
button after changing the sub picture channel. At this
time, reselect the channel of main picture.
SOURCE Used to assign a source of sub picture (TV, EXT1, EXT2 or
EXT3/S-Video).
SIZE Used to select a size of sub picture (Large , Small,
Double Window or 16 PIP).
POSITION( ) Used to move the sub picture counterclockwise.
P/ Used to select the channel of sub picture.
English - 37
Using Wise Link (depending on the model)
Wise Link is used to play JPEG files (*.jpg) and MP3 files (*.MP3) stored in the memory card on the TV.
◆ What is a Memory Card?
A memory card is an auxiliary storage device used in AV equipment to exchange data between
devices. It is mainly used in digital cameras, digital camcorders, MP3 players, notebooks and
PDAs.
◆ Memory Cards Available in WISE LINK
You can use CF (Compact Flash), SMC (Smart Media Card), SD (Secure Digital), MMC (Multi
Media Card), and MS (Memory Stick) in the four WISE LINK slots. Confirm the card type and
proper insertion direction before you insert a memory card. The correct card type is listed for
each slot.
Compact Flash I Multimedia Card (MMC) Memory Stick Secure Digital Memory Card
(SD Memory Card)
Memory Stick Pro and Memory Stick Duo are not supported.
➢
There are different slot configurations for Compact Flash Type I and II. This product supports
CF Type I.
◆ How to Insert a Memory Card
➢
◆ Cautions on Memory Card Use
Gently push the memory card into the slot. If the card is not inserted completely, it will not
work. Insert the card in the direction indicated on the memory card.
Note: Do not apply excessive force while inserting the card.
◆ How to Eject a Memory Card
Holding the tip of the card, gently pull it out.
- Data can be damaged when a memory card is used in the presence of static electricity and/or
electronic noise.
- Data can be damaged when a memory card is repeatedly inserted and ejected.
- Play speed may differ depending on the card type.
- Do not attach anything but a label in the proper place.
- Be careful to attach the label only within the proper space.
- Be careful not to make contact between the memory card terminal and metal objects.
- Do not strike, bend or drop the memory card.
- Do not dismantle or tinker with the memory card.
- Be careful to keep the memory card dry.
- Do not insert any objects other than Memory Card into the Memory Card Slot.
Smart Media Card
English - 38
Using Wise Link (depending on the model) (continued)
◆ Cautions on using WISE LINK Mode
- Do not insert foreign objects into the slot.
- Insert the memory card in the proper direction
- Do not remove the memory card when it is in use.
- The manufacturer’s responsibility does not include damaged data. (Be careful not to corrupt
data and be sure to back up files.)
- Use the slot cover so that dust and foreign objects cannot enter the slot when WISE LINK is
not in use.
◆ Initialization of WISE LINK Mode
Errors can occur in WISE LINK mode because of the various memory card types, the various
manufacturers and the type of data stored. When an error occurs, please initialize WISE LINK
as follows:
- Press the W.LINK button on the transmitter for about 2 seconds to initialize WISE LINK.
During Initialization, there will be no display for about 3 seconds.
- After pressing the W.LINK button to switch into TV mode, press the W.LINK button again to
return to Wise LINK mode. Initialization is now finished.
◆ Files supported by WISE LINK
File Type
File Size
Compatibility
Supported
Memory Card
Sizes
Data Copying
Formatting
the Memory
Card
Unsupported
and
Erroneous
Files
MP3 Files (*.mp3)JPEG Image (*.jpg)
JPEG images are classified into
standard JPEG and progressive JPEG.
• Standard JPEG: Files with less than 5
million pixels.
• Progressive JPEG: Files with less than
2 million pixels.
Still Image Files with (*.jpg) Extension Music Files with the (*.mp3) Extension
• CF: 512MBytes
• MS: 128MBytes
• MMC&SD: 512MBytes
• SMC: 128Mbytes
An error can take place if a higher capacity memory card is used.
When you use a memory card reader to copy data on your home computer, follow
the normal procedures. If you do not follow the proper procedures and erroneously
copy data, the data will not run in WISE LINK.
If you format the memory card on your computer, an error can occur in other digital
devices with the formatted card. You should only format the memory card in the
digital equipment using the memory card.
The file manager may show other files in addition to JPEG/MP3 files, but they
cannot be run. Do not rename unsupported files with file extensions that are
supported. It may cause errors.
No limit to file sizes.
MP3 files may not play depending on
the data transfer rate.
• Data Transfer Rate: Files with less
than 192 Kbps will run.
English - 39
Switching to WISE LINK Mode (depending on the model)
TV
Move
Source List
TV
WISE LINK
EXT1 : -----EXT2 : -----EXT3/S-Video : ------
œœ √√
Enter Return
1
Press the MENU
Result
: The main menu is displayed.
2
Press the œ or √ button to select Input.
Result
: The options available in the Input group are
()
button.
displayed.
3
Press the œ or √ button again to select Source List.
Result
: The options available in the Source List group are
displayed.
4
Press the ▼ or ▲ button to select WISE LINK and then Press the
œ or √ button.
Result
: The WISE LINK menu is displayed.
You can also select these options simply by pressing the
➢
W.LINK button. WISE LINK mode is activated. If you
press the button again, it switches back to TV mode.
English - 40
Selecting Image (JPEG) Files/Music (MP3) Files (depending on the model)
1
Press the W.LINK button.
2
Press the ▼ or ▲ button to select which memory card to run and
then press the
3
Press the œ or √ button to select the file type to run and then
press the
4
Press the ▼ or ▲ button to select the file to run and then press
the
ENTER ( ) button.
◆ While making a selection, information about the
➢
◆ When no card is inserted, “Please Insert Cards.” will
◆ When any card other than the memory card currently
◆ A maximum of one thousand files can be displayed.
◆ JPEG/MP3 file names are displayed in Korean and
◆ Images edited by JPEG editors (for example:
ENTER ( ) button.
ENTER ( ) button.
selected file is displayed on the right side of the
screen.
be displayed. When a new card is inserted or the
inserted card is loose, the memory card selecting
screen will automatically open.
in use becomes loose, ( ) will be displayed at the
top of the screen.
English only.
Photoshop or Paintshop) may not appear normal.
Move Enter Exit
JPEG : 0007 Files
Move Enter Return
Setup
Move Enter Return
English - 41
Picture (JPEG) Playback (depending on the model)
JPEG file format is supported.
➢
8
1
7
2
Move Enter Return
345
1) Press the (œ √▼▲) button to move
to the desired file and select it. Press
the Selection button and a full page
image will be displayed.
2) Press the (
the previous page.
3) The current page number out of the
total pages is displayed.
4) Press the (
the next page.
5) Press the EXIT
to the previous menu.
◆ When a JPEG file is displayed full page, the right / left and/or upper / lower parts of the
➢
image may appear black or the image may not be located in the center in the following
situations:
1) When the picture is smaller than 640 x 480
2) When the width : length proportion of the picture is not 4:3.
3) When those same parts of the original picture are black
◆ When a JPEG file is displayed full page or enlarged, the four edges may not be displayed.
This is because the picture tube display of the TV does not expose the four edges of any
image as to reduce the viewer’s inconvenience during a screen fluctuation caused by
power supply or signal changes.
◆ The small pictures in the list of JPEG files may appear slightly different from the full-page
pictures.
◆ If you press the MOVE button before all the pictures are displayed, the icon ( ) appears.
◆ When viewing still images or pausing a slide show, a screen saver will become active after
a set period of time.
œœœœ
) button to move to
√√√√
) button to move to
() button to move
Setup
6) Press the INFO
to the WISE LINK Setup Menu.
(Refer to page 46.)
7) The title, resolution, creation date
and number (current file number /
total file number) for the selected
image file will be displayed.
8) The selected memory card type is
displayed.
Press the PLAY/PAUSE (
to start the slide show beginning
with the selected image.
6
()button to move
√√
■■
) button
English - 42
Rotating the Picture (JPEG) (depending on the model)
1
Press the
image.
Result
2
Press the œ or √ button to select Rotate and then press the
ENTER ( ) button.
ENTER ()
: The
HELP menu is displayed in the lower part of the
screen.
button while viewing the full page
➜➜
Rotate Zoom Close
90 degrees 180 degrees 270 degrees
You can also select these options simply by pressing the
➢
ROTATE button. Press the ROTATE button to rotate
images 90, 180, 270 and 360 degrees clockwise.
◆
In order to display the full image on the screen, the picture
➢
size will automatically change depending on the rotational
angles (90 and 270 degrees)
◆ When rotating the picture, the rotated image will be displayed in
the JPEG file list.
◆ An enlarged image cannot be rotated.
Picture Zoom (JPEG)
1
Press the
image.
Result: The HELP menu is displayed in the lower part of the
2
Press the œ or √ button to select Zoom and then press the
ENTER ( ) button.
ENTER ()
screen.
Rotate Zoom Close
Rotate Zoom Close
(depending on the model)
button while viewing the full page
➜➜
Rotate Zoom Close
(Enlarge 1)(Enlarge 2)(Normal)
You can also select these options simply by pressing the
➢
ZOOM button. When you press the ZOOM button
Enlarge1
be selected in sequence.
◆
You can use the
➢
picture.
◆ When you move the enlarged picture, the edges of the original
picture may not be displayed.
( ), Enlarge2 ( ) and Normal ( ) will
Rotate Zoom Close
(œ √▼▲)
Rotate Zoom Close
button to move the enlarged
English - 43
Music File (MP3) Playback (depending on the model)
MP3 file format is supported.
➢
8
1
7
2
Move
1) Press the ▼ or ▲ button to move to
a desired file and it will
automatically play.
2) Press the
the previous page.
3) The active page is displayed.
4) Press the
the next page.
5) Press the EXIT
to the previous menu.
6) Press the INFO
to the WISE LINK setup menu.
(Refer to page 46.)
◆ Play time and total running time of VBR MP3 files will not be displayed.
➢
◆ The screen saver will become active after a set period of time whether the music is playing
or paused.
œœœœ
(
)
button to move to
√√√√
(
)
button to move to
()button to move
()button to move
√
II Play/Pause Return
34 5
Setup
7) The elapsed time, total playback
time, creation date and number
(current file number / total file
number) for the selected file will be
displayed.
8) The selected memory card type is
displayed.
Press the PLAY/PAUSE (
to play or pause the file.
6
√√
■■
) button
English - 44
Playback All JPEG/MP3 Files (depending on the model)
JPEG/MP3 files are displayed.
➢
8
1
7
2
Move
1) Please see pages 41 and 44 on how
to playback JPEG & MP3 files.
2) Press the
the previous page.
3) The active page is displayed.
4) Press the
the next page.
5) Press the EXIT
to the previous menu.
◆ The file manager may show other files in addition to JPEG/MP3 files, but they cannot
➢
be run.
◆ You cannot select “Music Repeat” in the file list. When a piece of music is finished,
it stops.
œœœœ
(
)
button to move to
√√√√
(
)
button to move to
()button to move
√
II Play/Pause Return
345
Setup
6) Press the INFO
to the WISE LINK Setup Menu. (See
page 46.)
7) The information for the current file
is displayed.
8) The selected memory card type is
displayed.
()button to move
6
English - 45
WISE LINK Menu Setup (depending on the model)
Setup
Music Slide Show
Slide Show Speed : Normal
Slide Show Effect : Full Screen
Music Repeat : Off
Screen Saver : 5min
Move Enter Exit
You can set various functions in WISE LINK mode.
1
Press the INFO ()button while in WISE LINK SETUP mode.
WISE LINK SETUP mode is displayed.
2
Press the ▼ or ▲ button to select the desired sub-menu and then
press the
3
Press the ▼ or ▲ button to select the desired item and then press
the
4
Press the EXIT ( ) button to exit the menu.
➢
√√
√√
√√
√√
ENTER ( ) button.
ENTER ( ) button.
Turning off the TV set or switching to another mode during
setup will cancel your settings. The Wise Link settings will
revert to the previously memorized settings.
Setup
Music Slide Show
Slide Show Speed : Normal
Slide Show Effect : Full Screen
Music Repeat : Off
Screen Saver : 5min
Move Enter Exit
Fast
Normal
Slow
√√
√√
√√
√√
English - 46
WISE LINK Menu Setup (depending on the model) (continued)
◆
Music Slide Show
Slide Show Speed
Slide Show Effects
Setup
Music Slide Show
Slide Show Speed : Normal
Slide Show Effect : Full Screen
Music Repeat : Off
Screen Saver : 5min
Move Enter Exit
Setup
Music Slide Show
Slide Show Speed : Normal
Slide Show Effect : Full Screen
Music Repeat : Off
Screen Saver : 5min
Move Enter Exit
Music Slide Show
Slide Show Speed : Normal
Slide Show Effect : Full Screen
Music Repeat : Off
Screen Saver : 5min
Move Enter Exit
Fast
Normal
Slow
Dynamic
Full Screen
Setup
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
√√
Music plays while the pictures are displayed in
sequence.
◆
Music Slide Show does not work in either Card
Selection mode or File Type Selection mode.
◆
If there are no JPEG files or MP3 files in the folder,
Music Slide Show will not run.
◆
During the Music Slide Show, only the Play / Pause /
Exit / Stop buttons are available.
◆
Only the files in the same folder can be played when
you run a file from the JPEG/MP3 file folder.
◆
You can set the Time per Picture when the slide
show starts.
-
Fast: Pictures change every three seconds.
-
Normal: Pictures change every five seconds.
-
Slow: Pictures change every ten seconds.
◆
During the slide show, you can select the Slide Show
Effects to display using the remote control.
-
Dynamic: Pictures appear from various directions.
-
Full Screen: Stops the Slide Show Effects.
Music Repeat
Screen Saver
◆ When Music Repeat is set to OFF, the Music Slide Show repeats all the music.
➢
◆ The Pause button will toggle between the following (during Music Slide Show):
◆ When Music Slide Show is on, Picture Pause and Picture/Music Pause will be
◆ VBR (Variable Bit Rate) MP3 files will not be played in order to ensure the stable
◆
You can set the music to repeat.
-
Off: MP3 files stop one by one after playing.
-
All: All the files within the folder play in sequence
and repeat.
-
One: The file currently playing repeats.
◆
A screen saver is provided to prologue the life of the
Screen.
-
Off: Stops the screen saver.
-
5min: The screen saver automatically turns
on if no button is pressed within five minutes.
-
10min: The screen saver automatically turns
on if no button is pressed within ten minutes.
Music Slide Show
Slide Show Speed : Normal
Slide Show Effect : Full Screen
Music Repeat : Off
Screen Saver : 5min
Move Enter Exit
Music Slide Show
Slide Show Speed : Normal
Slide Show Effect : Full Screen
Music Repeat : Off
Screen Saver : 5min
Move Enter Exit
Picture Pause
Setup
√√
√√
Off
All
√√
One
√√
Setup
√√
√√
Off
√√
5min
√√
10min
→ Picture/Music Pause → Release Pause (Play)
released after five minutes in order to protect the CRT.
operation of the slide show.
English - 47
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
This information is divided into numbered pages (see diagram).
◆
Television programme times
◆
News bulletins and weather forecasts
◆
Sports results
◆
Travel information
Part Contents
A Selected page number.
B Broadcasting channel identity.
C Current page number or search indications.
D Date and time.
E Text.
F Status information.
➢
➢
FASTEXT information.
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly,
☛
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the or
button.
2
Press the TTX/MIX ( ) button to activate the teletext mode.
:
The contents page is displayed. It can be redisplayed
at any time by pressing the (index) button.
English - 48
Result
3
If you wish to display the actual broadcast at the same time as
the teletext page, press the
4
Press the TV ( ) button to exit from the teletext display.
TTX/MIX ( ) button again.
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result
: The current page counter is incremented and the
page is then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the (hold). Press the (hold) again to
resume.
Using the various display options:
To display... Press the...
◆ Both teletext information and TTX/MIX ()
the normal broadcast twice
◆ Hidden text (reveal)
(answers to quiz games, for example)
◆ The normal screen (reveal) again
◆ A secondary page, (sub-page)
by entering its 4-digit number
◆ The next page (page up)
◆ The previous page (page down)
◆ Double-size letters in the: (size)
• Upper half of the screen • Once
• Lower half of the screen • Twice
◆ Normal screen • Three times
English - 49
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded,
and can be selected by pressing the coloured buttons on the remote
control.
1
Display the teletext contents page by pressing the TTX/MIX
( ) button.
2
Press the coloured button corresponding to the topic that you
wish to select;the available topics are given on the status line.
Result
:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆
Press the (sub-page) button.
Result
: The available subpages appear.
◆
Select the required sub-page. Sub-pages can be scrolled by
using the
TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the button.
Result
➢
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2and 3for each page to be stored, using a
different coloured button each time.
5
Press the (store) button until the corresponding blocks blink.
: Four 3-digit numbers are displayed in different
colours.
The button is used to switch between the LIST and
FLOF (or FASTEXT) modes.
English - 50
Connecting to the External Input/Outputs
1
2121212
1
RGB
2
1
MONITOR
AUDIO OUT
L
R
➢
“” is used for the equipment with an RGB output,
such as video game devices or video disc players.
VCR
②
Rear of the TV
or
①
This end can be fitted with:
◆ A SCART connector
◆ Three RCA connectors (Video + Audio-L and R)
②
If you have a second VCR and wish to copy cassettes tape, connect the
source VCR to
redirect the signal from
③
If you have a decoder, connect the decoder to the VCR and the VCR to the
television.
➃
When you wish to record a programme, connect the receiver to
and the VCR to
“”
.
“”
and the target VCR to
“”
“”
so that you can redirect the signal from
to
“”
.
“”
so that you can
①
“”
“”
to
DVD
③
Decoder /
Video game device
Video disc player
Satellite receiver
➃
Connecting to the Audio Output
➢
The “MONITOR AUDIO OUT” (RCA) connectors are used for equipment, such as an audio system
(to take full advantage of the Surround sound effect).
Rear of the TV
Audio system
English - 51
Connecting to the RCA Input
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Side of the TV
Connecting to the S-Video Input
Camcorder
Video game device
Video disc player
➢
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Side of the TV
and
①
To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
Whenever you connect an audio or video system to your
☛
television, ensure that all
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
①
elements are switched off.
Camcorder
VCR
English - 52
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
Check that all the necessary connections have been made.
2
Switch your television on, then press the SOURCE
repeatedly.
Result
: The input sources are displayed in the following
order:
EXT1-EXT2-EXT3/S-Video (Option)
Depending on the source selected, the pictures may appear
➢
automatically.
To watch television programmes again, press the TV ()
➢
button and select the number of the channel required.
()
button
Automatic Degaussing to Remove Colour Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and colour patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “
POWER( )” button on the remote control.
☛ If your television will be left unattended, press the “” (On/Off) button to turn your
television off.
English - 53
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions
Image or Music Files do not play back.
The image appears in mosaic at first.
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE ( ) button on the remote control has
been pressed.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
◆ Please check the original files.
◆ There may be errors in the original files.
◆ It is typical for a Progressive JPEG.
◆ It will automatically become normal after a short period of time.
Each picture or slide has a different
running time.
The memory card is not recognized.
The volume changes while music is
played.
There is a blank screen when switching
to WISE LINK.
English - 54
◆ The processing time may be different depending on the memory
card type or the picture size.
◆ Check if it is supported in WISE LINK mode.
◆ Check if the card is inserted all the way.
◆ The reading time may differ depending on the card capacity and
type. Please give it a moment.
◆ Check if the memory card is normal. A memory card which has
been formatted on a computer may not work in AV devices.
◆ Check the original file. The manufacturers may randomly set the
volume when they create MP3 files.
◆ Check if the inserted memory card is normal.
Memo
English - 55
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-03304A-01
Loading...