Samsung WM-202 User Manual

WM-202

DAB/FM WiFi Internet Radio with MP3/WMA Media Streaming

with Enhanced User Interface

Sound for Generations

ROBERTS

Please read this manual before use

Contents

Your radio ......................................................................................... 2-8

WM-202 Internet Radio and Media Player features ......................... 2

Before you can use this product ....................................................... 3

About this instruction manual ........................................................... 4

Controls and connections .............................................................. 5-6

Battery operation ..............................................................................7

Navigation controls ........................................................................... 8

Network conﬁ guration .................................................................. 9-16

Connecting your radio to your computer network ........................ 9-13

Entering your network details manually ..................................... 14-16

Internet Radio mode .................................................................... 17-30

Internet Radio - the basics ............................................................. 17

Operating your radio - Internet Radio mode .............................. 18-26

Selecting a radio station by location ............................................... 18

Selecting a radio station by genre ..................................................20

Searching for a radio station by name ............................................ 21

Selecting a new or popular station ................................................. 22

Selecting a podcast / BBC Listen Again ......................................... 23

Presetting stations - Internet Radio ................................................24

Last Listened ..................................................................................25

Display modes - Internet Radio .................................................25-26

Customising your radio ................................................................... 27

Conﬁ guring My Favourite Stations ................................................. 28

Conﬁ guring My Added Stations ...................................................... 28

Selecting favourite stations ............................................................ 29

Selecting your added stations ........................................................ 30

Media Player mode ...................................................................... 31-40

Using Windows Shares .................................................................. 31

Locate the shared audio ﬁ les using the radio ............................ 32-33

Setup a windows PC via UPnP server ........................................... 34

Connecting the radio using UPnP .................................................. 35

Locating and playing media ﬁ les using UPnP ........................... 36-37

Media selection ......................................................................... 38-39

Controlling playback .......................................................................39

Display mode - Media Player ......................................................... 40

DAB mode .................................................................................... 41-48

Selecting a station - DAB ............................................................... 42

Secondary services - DAB ............................................................. 42

Display modes - DAB ...............................................................43-44

Finding new stations - DAB ...........................................................45

Manual Tuning - DAB ....................................................................46

Dynamic Range Control settings - DAB ........................................ 47

Station order setup - DAB ............................................................. 48

FM mode ....................................................................................... 49-54

Manual tuning - FM ....................................................................... 50

Display modes - FM ....................................................................... 51

Scan setting - FM .......................................................................... 52

Stereo / Mono switching - FM ........................................................ 53

Presetting stations - DAB and FM ................................................. 54

Clock and Alarms ....................................................................... 55-63

Automatically updating the clock ....................................................55

Setting the clock format ................................................................. 56

Manually setting the clock .........................................................57-58

Setting the alarm clock .............................................................59-61

Disabling alarms ............................................................................ 62

Snooze timer ................................................................................. 62

Sleep timer .................................................................................... 63

Display and Audio ....................................................................... 64-66

Brightness control ........................................................................... 64

Contrast / viewing angle control ..................................................... 65

Headphone socket ......................................................................... 66

Auxiliary input socket ...................................................................... 66

Information ................................................................................... 67-72

Factory reset .................................................................................. 67

Software update ............................................................................. 68

Network proﬁ les .............................................................................. 69

Troubleshooting ......................................................................... 69-70

Software version display ................................................................ 71

Audio FAQ ...................................................................................... 71

Cautions / Speciﬁ cations ................................................................ 72

Guarantee ...................................................................................... 74

WM-202 Internet Radio and Media Player features

The Roberts WM-202 provides the following features in an attractive compact unit:-

Your radio

● Listen to local, regional, national and international broadcasts using FM, DAB and Internet radio

● Listen to over 1000 radio stations from around the country, and over 10,000 from around the world via the internet without using your PC.

● Listen to previously broadcast material from the BBC (using Listen Again)

● Listen to podcasts from a wide range of broadcasters.

● 15 radio station presets (5 Internet Radio, 5 DAB and 5 FM).

● Use the Media Player to play your music collection from your computer.

● The Media Player can connect to Windows Shares or UPnP servers (e.g. Windows Media Player 11). Connection to Apple and Linux based computers is also possible.

● MP3, WMA and Real Audio formats are supported.

● The WM-202 connects to your home computer network, either using WiFi or via a wired Ethernet connection.

● All radio station presets, network conﬁ guration details and user settings are retained in the event of a power failure.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

● Large clock display with time and date when in Stand-by.

● Two alarm timers with snooze feature to wake you to either buzzer or

● Adjustable sleep timer, can be set to turn the radio off between 15

● Easy-to-read graphic display.

● Adjustable display backlight.

● Auxiliary input for playing audio from MP3 players or other audio

● A standard 3.5mm headphone socket for private listening.

● High quality full-range, stereo speakers (2 x 3W).

● Mains or battery power (requires 6 x D cells for use away from the

radio alarm.

and 120 minutes.

equipment.

mains supply).

Before you can use this product

Before you can use your Internet radio, you must have the following:

● A broadband Internet connection (not required for DAB, FM or Media player functions).

● A wireless access point (WiFi) or a wired Ethernet connection connected to your broadband Internet Service Provider, preferably via a router. In many cases the broadband modem, router and wireless access point will be a single combined unit supplied by your Internet Service Provider or bought from a computer store.

● If your wireless network is conﬁ gured to use Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA/WPA2) data encryption then you need to know the WEP or WPA key used for encryption so you can get the Internet radio to communicate with the network.

If connecting using WiFi, the Internet radio will typically work within a 10-20 metre radius from your wireless access point. The actual range achieved will depend upon the building type, other nearby wireless networks, and possible interference sources. DAB and FM radio functions can operate wherever the radio is able to receive a suitable broadcast signal.

IMPORTANT: Before you continue, make sure that your wireless access point or router is powered up and working with your broadband Internet service (use your computer to verify this). To get this part of the system working you must read the instructions supplied with the wireless access point or router.

About this instruction manual

This instruction manual is split into sections for each of the different operating modes of your Roberts WM-202 radio. There are four main sections - Internet Radio, Media Player (streaming ﬁ les from a stored library), DAB radio and FM radio. Each section is clearly identiﬁ ed by the shaded heading in the top right hand corner of each pair of pages.

Before using the Internet Radio and Media Player functions, you will need to connect your radio to your computer network using either the WiFi or Ethernet connection. This is covered in the section titled Conﬁ guration.

The Internet Radio section describes how to ﬁ nd radio stations to listen to. These can be radio stations that you already know and listen to conventionally, or new stations you may search for. You may set up stations that you like as Favourites so that they are more readily accessible.

The section for the Media Player describes the two methods by which the radio can access music ﬁ les that you may have stored on a computer connected to your network. The use of Shared Folders, or Shared Media (using UPnP) is explained.

The two sections for DAB Radio and FM Radio describe how to use the radio to listen to conventional radio broadcasts.

The section titled Clock and Alarms describes the different ways by which the clock in the radio may be set, as well as explaining the use of the alarms, snooze and sleep timer features.

The Display and Audio section shows how to adjust the display and to connect your radio to other equipment.

The Information section includes troubleshooting, speciﬁ cations and warranty information.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Conﬁ guration

Internet Radio

Media Player

DAB Radio

FM Radio

Clock and Alarms

Display and Audio

Information

Your radio

(page 9)

(page 17)

(page 31)

(page 41)

(page 49)

(page 55)

(page 64)

(page 67)

Controls and connections

(Top)

1. On / Off button

2. LCD display

3. Telescopic aerial

4. Preset button 3

5. Preset 1 / Rewind button

6. Mode button

7. Preset 2 / Fast forward button

8. Menu button

9. Back button

10. Forward button

11. Tuning / Select / Snooze control

12. Volume Up button

411

67 8910

141516

13. Volume Down button

14. Info button

15. Preset 5 / Play button

16. Preset 4 / Pause button

Controls and connections

(Rear)

Your radio

Aux In

17. Battery compartment

18. Ethernet socket (RJ-45)

19. USB socket

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

19 20 21

20. Auxiliary input socket

21. Headphone socket

22. DC input socket

Battery operation

1. Remove the battery cover on the rear of the unit by pushing the battery door in slightly and then downwards in the direction of the arrows in the diagram.

2. Insert six LR20 (D size) alkaline batteries into the battery compartment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment. Replace the battery cover.

3. Short running time, reduced power, a dim display, and audio distortion are all signs that the batteries may need replacing.

4. If the radio is not to be used on battery power for an extended period of time it is recommended that the batteries are removed from the radio.

We recommend for economy that the WM-202 is used with the AC adaptor whenever possible with battery operation for occasional or stand-by use only. Inserting the adaptor plug into the DC IN socket will disconnect the batteries.

If using batteries, only alkaline types should normally be used. Battery life will vary according to the use of the radio, but between 35 and 50 hours should be possible. WiFi use takes more power than DAB listening, for example.

Rechargeable Nickel Metal Hydride (NiMH) cells can be used in the radio but must be charged outside the radio using an external charger. Note that commercially available D size NiMH cells have a capacity which is only a small fraction of that of D size Alkaline cells and so they will power the radio for only a few hours before needing recharging.

Never mix batteries of different types, capacities or brands in the radio.

IMPORTANT: The batteries should not be exposed to excessive heat such as sunshine, ﬁ re or the like. After use, disposable batteries should if possible be taken to a suitable recycling centre. On no account should batteries be disposed of by incineration.

Navigation controls

This page describes the basic means of controlling your WM-202 radio. Instructions for each of the operational modes are given in the later sections of this book.

1. Pressing the On/Off button brings your radio out of Stand-by mode if running from the mains or switches it on if using batteries.

Pressing On/Off while the radio is in use will put it into Stand-by mode when

running from the mains, or will switch it off after a short delay when running on batteries (alarms cannot be used when running on batteries).

2. Pressing the Mode button gives you access to each of the operating modes in sequence - Internet Radio, Music Player, DAB radio and FM radio.

3. Pressing the Menu button will access the menu system.

4. Many operations require the user to make a selection from the menu. This is done using the Tuning/Select control. Turn the control clockwise or anti-clockwise to highlight the desired menu item then press the control to select that item.

If there are more than ﬁ ve items in a menu, then the display will automatically scroll

up or down so that the additional items become visible. A sliding bar on the right will give an indication showing the current portion of the menu that is displayed.

If there are many items in a menu, then the radio allows the menu to 'wrap around'

in either direction. This can make it easier to reach items at the end of a long menu, such as a list of countries or Internet radio stations.

5. The Forward button may also be used to make selections from the displayed menu or to select the next character in text entry screens.

6. If an error is made when navigating the menus, it is generally possible to go back to a higher level menu by pressing the Back button.

Note: In this instruction booklet, press always means press and release.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Your radio

Connecting your radio to your computer network

1. Place your radio on a ﬂ at surface and plug the cable from the mains adaptor into the DC input socket located on the rear of your radio (marked 'DC in') ensuring that the plug is pushed fully into the socket.

2. If you wish to use a wired network connection, plug the Ethernet cable into the RJ-45 socket at the back of the radio.

3. Plug the mains adaptor into a wall socket and switch on the socket.

IMPORTANT: The mains adaptor is used as the means of connecting

the radio to the mains supply. The mains socket used for the radio must remain accessible during normal use. In order to disconnect the radio from the mains completely, the mains adaptor should be removed from the mains socket outlet completely.

4. When you apply power, the display on the radio will light up and say: 'ROBERTS' and 'STARTING' with a progress indicator. The ﬁ rst time that you use your radio (or after a Factory Reset) after a few seconds the display will show a default date and time of 00/00/0000 and 00:00.

5. Press the On/Off button to take your radio out of stand-by. You should see the main mode menu. Use the rotary Tuning/Select control to point to "Internet Radio" and then select this function by pressing the control.

If no network connection is yet conﬁ gured, the radio will enter the

Network Settings Wizard and will display 'Scanning...'. After a short while the display will show a list of the available WiFi networks. If you are intending to use the WiFi connection, go to step 6.

To use the Ethernet connection to your router with automatic

conﬁ guration, rotate the Tuning/Select control to point to the '[Wired]' menu item. Press the control and the radio will attempt to connect.

Aux In

If your network allows automatic conﬁ guration the radio will acquire

a network address, and will then enter the main Internet Radio menu (paragraph 13 overleaf).

There are two indicator lights incorporated into the RJ-45 connector.

If you have problems with your wired connection, they may help you to identify the possible cause of the problem.

Green ON = Link established; OFF = no connection

Yellow Flashing = Data transfer

If your network does not support automatic conﬁ guration or if you wish

to set it up manually then you should select '[Manual conﬁ g]' instead of selecting '[Wired]' in the Network Wizard (see page 14 for more information).

6. If you wish to use a WiFi connection, you will ﬁ rst need to identify your network in the list of network names presented by the Network Wizard. If the radio cannot ﬁ nd any networks then you will have to get your wireless router working (please see the instructions supplied with it) or you may be too far from the router.

When the radio ﬁ nds your wireless network, it displays the Network

Name (SSID) for the wireless access point on the screen. This is a name that is allocated to the access point in your router by the person who set up the network - for example: 'Jones family' or 'Paul's network'.

It is possible, and in some locations highly likely, that your radio will

ﬁ nd more than one wireless network, in which case you should choose which one you need to connect to.

7. Rotate the Select control to see the SSID for each wireless network that the radio has found. If your network is shown proceed to step 9 on the next page. If it is not shown then proceed to step 8.

If you make a mistake at any point, use the Back option to go back to

the previous screen.

Conﬁ guration

5,7

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Connecting to your computer network - cont.

8. If your network is not found, it is possible that it is conﬁ gured such that the SSID is not broadcast (sometimes referred to as hidden). If this is the case then the name will not be visible in the list (there may be a blank entry). You will then need to use the Tuning/Select control to point to the '[Manual conﬁ g]' option, and then you should press the control to enter manual conﬁ guration. This procedure is described in the 'Network Conﬁ guration Menu', see page 14, 'Entering the network name manually'.

If you know that your network name is not hidden, and it was not found,

then try re-scanning (press the Back button), and if necessary try moving your radio to a location closer to your access point / router.

9. When the SSID for the wireless network you wish to connect to is highlighted on the screen, press the Tuning/Select control.

10. If your network is conﬁ gured without an encryption code, the screen should say 'Connecting...', and then show the main Internet Radio menu.

If this is the case then you have successfully connected your radio to

your network, so please proceed to paragraph 13 on the next page.

11. If the screen displays 'Key:' , it is because the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You therefore need to enter the correct WEP or WPA key into the radio to allow it to communicate with your wireless network.

If you do not have the WEP or WPA key, then you should obtain it

from the person who set up your network. Some wireless routers may come with an encryption key already set up by the supplier, in which case you should refer to the user documentation provided with it.

8-9

WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some

wireless routers can also use pass-phrases for WEP but these do not conform to a deﬁ ned standard and are not supported. WPA keys are usually set up using a pass-phrase of between 8 and 63 characters. Your Internet radio can accept pass-phrases for WPA keys.

12. To enter the WEP or WPA key, characters are selected and entered using the Tuning/Select control. As you rotate the control, the radio scrolls through the available characters as well as the three controls on the right. The character currently highlighted will be entered when you press the Tuning/Select control.

Do this as needed until the complete key has been entered. Remember,

WEP keys only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper and lower case characters. You must enter the key

exactly or the radio will not connect to the network.

The three controls on the right-hand side of the screen have special

functions. You can quickly access these by pressing the Info button and then use the Tuning/Select control as needed:

select ' select ' select '

If a WEP or WPA key has previously been entered for the selected

SSID then the display will show 'Key: [Set]'. If you have previously entered a different key, you must clear this by selecting the symbol. This will remove the '[Set]' indication.

After the ﬁ nal character of the WEP or WPA key has been entered,

highlight the ' radio should now be able to connect to the network.

' to erase a character or key previously entered

' when the key is complete

' to cancel and re-run the Network Wizard

' symbol and press the Tuning/Select control. The

Conﬁ guration

12-13

13. Once you have connected your radio to the network (and therefore also to the Internet) it will display the main Internet Radio menu. Press the On/Off button to put the radio in Stand-by mode. It should then display the time. This time is obtained from the Internet by the radio. If the time display is not correct for any reason, it can easily be adjusted later, see page 57, 'Manually setting the clock'.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Connecting to your computer network - cont.

If you have followed the steps on the preceding pages successfully, your radio will have connected to your router, and then made a connection to the Internet and set its clock. If this is the case, then you can try listening to radio stations via the Internet as described on page 17 onwards.

Changing the network connection

In the sections above, you chose how your radio would be connected to your network, either using a WiFi connection or using a wired Ethernet cable. From time to time, you may ﬁ nd that you need to connect to different computer networks. The Internet setup menu allows you to change your radio’s network settings, scan for an alternative wireless network, or to manually conﬁ gure the network parameters.

The steps outlined below describe how you can do this - see also the section 'Network proﬁ les' on page 69. If you have no need to do this, however, please skip to page 17.

Conﬁ guring the radio to use an alternative WiFi connection

1. From the radio’s Network settings menu, select 'Network wizard'. This will present you with details of any WiFi networks that are found. Scroll down the list using the Tuning/Select control to the desired network name. Press the control to select this network.

The radio will then use its WiFi system to communicate with the network. Depending on the settings

for that particular network you may need to enter an encryption key (see page 11). By default the radio will then acquire an IP address and other network settings from your router using DHCP.

Conﬁ guring the radio to use the wired Ethernet connection

2. Connect your radio to your router using an Ethernet cable plugged into the RJ-45 socket at the back of the radio. From the radio’s Network settings menu, select 'Network wizard'. This will present you with details of any WiFi networks that are found. Scroll down the list using the Tuning/Select control to the '[Wired]' option. Press the control to select this.

The radio will then use its Ethernet connection to communicate with the network. By default the radio

will then acquire an IP address and other network settings from your router using DHCP.

Entering the network details manually

If you do not wish to use DHCP for automatic conﬁ guration, or if your network is conﬁ gured with a hidden SSID, then you will need to enter some network settings manually. (Note - a hidden SSID may prevent casual observers from detecting your network, but it is not recommended as a means of network security.)

1. From the radio’s Network settings menu, select 'Manual settings'. You must then choose whether to connect using 'Wired' or 'Wireless' connections. If you choose 'Wireless' there are as many as nine settings screens, shown by the '1 of 9' progress marker in the top right corner of the display. If you choose 'Wired' there are ﬁ ve screens and the progress marker will reﬂ ect this, although the steps to set up the network parameters are basically the same.

2. The next menu asks whether you wish to use DHCP to conﬁ gure your network parameters (IP address, subnet mask, gateway address, etc.). Unless you are familiar with networking and related terminology, we recommend that you allow the use of DHCP. Choose 'DHCP enable' unless you need to specify network details manually.

If you have chosen 'Wired' and then 'DHCP enable', your radio should now establish a connection to

the router using the Ethernet cable. Please skip to step 11 on page 16.

If you chose 'Wireless' and 'DHCP enable', please skip to step 6 on page 15 in order to set up the

wireless connection details.

If you chose 'DHCP disable' for either connection method, the next step is to set up the IP address.

3. The IP address used should be chosen to be compatible with the settings in your router and must be a unique address on your network. If you are using DHCP for some devices and static (manually conﬁ gured) IP addresses for others, the IP address used should fall outside the range that the router may allocate using DHCP. Typically, the ﬁ rst three groups of digits will be the same for all devices on your network. To enter the IP address, rotate the Tuning/Select control to set the value for each group of digits and then press the control to enter the value and to move on to the next group. When the IP address has been entered, the subnet mask should be entered. The subnet mask deﬁ nes which parts of the IP address are common across your network. For most small networks the subnet mask will be

255.255.255.0 and this is entered in the same way.

4. The Gateway address is normally the IP address of the router through which the radio connects to the internet and is entered in the same way as the previous addresses.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Conﬁ guration

Entering the network details manually - cont.

5. In most installations the DNS settings (DNS = Domain Name Server) will be set to the same IP address as your router. In this case the secondary DNS may be left at zero.

To enter the DNS address, rotate the Tuning/Select control to set the value for each group of digits

and then press the control to enter the value and to move on to the next group. Repeat this until all eight groups of digits have been entered.

If you previously speciﬁ ed 'Wired' and then 'DHCP disable', your radio should now connect to the router

using the Ethernet cable (in which case skip to step 11).

6. If you speciﬁ ed 'Wireless', the next step is to set up the WiFi connection, starting with the name of the wireless network (SSID) followed by the encryption options and password.

To enter the SSID, characters are selected and entered using the Tuning/Select control. As you rotate

the control, the radio scrolls through the available characters as well as the three controls on the right. The character currently highlighted will be entered when you press the Tuning/Select control.

Do this as needed until the complete network name has been entered. The SSID setting is sensitive

to upper and lower case characters and symbols. You must enter it exactly as set up in your router.

The three controls on the right-hand side of the screen have special functions. You can quickly access

these by pressing the Info button and then use the Tuning/Select control as needed:

select ' select ' select '

7. Having entered the SSID, you must enter details of the encryption system used on your wireless network. This should be the same as speciﬁ ed in your router settings. If your network does not use encryption, then select the 'Open' option. Your radio should then connect to the network - skip to step 11. If your network uses WEP (Wired Equivalent Privacy) select the 'Pre-Shared Key' option then go to step 8. The remaining options are for WPA or WPA2 (WiFi Protected Access) - see step 9.

8. If you chose 'Pre-Shared Key' in step 7, you should then choose the WEP option. The key should be entered using only the numbers 0-9 and the letters A-F. The key will be 10 characters long for 64-bit encryption and 26 characters long for 128-bit encryption. The radio will accept lower-case letters a-f as equivalent to upper-case A-F. Spaces or special symbols are not permitted in WEP keys.

' to erase a character or key previously entered (press Info again to continue)

' when the SSID is complete

' to cancel and go back to the DNS settings screen

Entering the network details manually - cont.

The three controls on the right-hand side of the screen have special functions. You can quickly access

these by pressing the Info button and then use the Tuning/Select control as needed:

select ' select ' select '

Once the key is entered the radio should connect to your network. Please skip to step 11.

9. WPA and WPA2 are similar, although WPA2 offers a higher level of security. Whichever you selected in step 7, you then have to specify the variant used. They are TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard). As previously, the setting should match that used by your router. Some routers allow both to be speciﬁ ed, and the router will use whichever variant is supported by the connected device. AES is regarded as the more secure option if it is available.

10. The radio will then require you to enter the encryption key. This must be a string of between 8 and 63 characters and must be identical to the key which has been entered into your router. Note - the

encryption key is sensitive to the use of upper and lower case letters and symbols. Take care to enter the key exactly, or the radio will not be able to connect to your router.

The three controls on the right-hand side of the screen have special functions. You can quickly access

these by pressing the Info button and then use the Tuning/Select control as needed:

select ' select ' select '

Once the key is entered the radio should connect.

11. While the radio is trying to connect to your network, it will display 'Processing...' while checking the encryption key (if using the WiFi connection) and then 'Connecting...'. If the connection is made successfully, the radio will return to the Network settings menu. If the radio cannot connect, then it will display a 'Failed to connect' message and will return to the SSID entry screen (step 6).

Once connected, the network settings are stored in the radio. The settings are retained when the radio

is disconnected from the mains and when batteries are removed.

You may now use the Back or Mode buttons to access the functions of your radio.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

' to erase a character or key previously entered (press Info again to continue)

' when the encryption key is complete

' to cancel and go back to the SSID settings screen

' to erase a character or key previously entered (press Info again to continue)

' when the encryption key is complete

' to cancel and go back to the TKIP / AES options screen

Conﬁ guration

Internet Radio mode

Internet Radio - the basics

Before you can use your radio to listen to broadcasts via the internet, it is necessary to have already connected your radio to your computer network using either the wireless (WiFi) connection or the wired Ethernet connection (RJ-45 socket) on the back of the radio. Please see page 9 for details.

There are literally many thousands of broadcasts available via the internet. Your radio provides several ways of searching for broadcasts in order to make ﬁ nding and choosing broadcasts easier. Once you have found radio stations which you like, you may either store them as presets within the radio, or add them to a list of your favourite stations which your radio can access. The number of presets is limited (there are ﬁ ve preset buttons on the radio), but you can store as many favourites as you like.

You may search for an internet radio station by Location. If you know the name of the station and the country from which a station is broadcast this may be the easiest method to ﬁ nd a station. It is also a great way to experience radio from other parts of the world.

You may also search for an internet radio station by Genre. If you prefer a particular type of music, Blues for example, you may search for a radio station that broadcasts that type of music, and you can see a list of Blues radio stations regardless of location, or taking location into account.

If you know part of the name of an internet radio station, you can enter it into the radio and it will search for stations that match that name. This can be helpful if you are unsure of the location or genre of a particular station.

The WM-202 radio connects to a radio station database which serves many users in many countries. This means that there is a very wide range of programme content available. You can also search for stations which have been recently added to those available (new stations) or you can search for the most popular.

Operating your radio - Internet Radio

Selecting a radio station by location

1. Press the On/Off button to switch the radio on. Then press the Mode button to select Internet Radio mode.

2. Press the Menu button to enter the main Internet Radio menu. Rotate the Tuning/Select control until "Station list" is highlighted on the display. Press the Tuning/Select control to select.

3. Rotate the Tuning/Select control until 'Stations' is highlighted on the display. Press the Tuning/Select control to select.

4. Rotate the Tuning/Select control until 'Location' is highlighted on the display. Press the Tuning/Select control to select.

5. Rotate the Tuning/Select control to scroll through the list of continents. When the desired continent is highlighted press the Tuning/Select control.

6. The display will show the list of countries within the chosen continent. If there are many countries shown you can scroll through the list continually in either direction. For example, if the chosen continent was Europe, then to ﬁ nd the United Kingdom scroll up from the top of the list to the bottom by turning the Tuning/Select control anti-clockwise. Press the Tuning/Select control to choose the desired country.

7. You will typically ﬁ nd that you then have the option to select either 'All Stations' or one of a number of categories. The lists are always sorted alphabetically, and long lists will wrap around from top to bottom or bottom to top.

Internet Radio

2-7

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

8. Rotate the Tuning/Select control to highlight your chosen radio station and then press the control to conﬁ rm. The display will show 'Connecting...' while the radio connects to the new station. The radio should then start playing. Adjust the volume as needed.

9. If the station has on-demand content, that is, it gives the option of listening to programmes which have already been broadcast or to Podcasts, there will be an additional screen showing the radio station name as well as a 'Podcasts' option.

These are selected using additional menus, determined by the radio

station and the content. There may simply be a list of programmes, or there may also be options to chose from broadcasts on particular dates or days of the week. The examples shown here are typical.

Podcasts and Listen Again content can also be accessed separately

from the main Internet Radio menu, see page 23.

If your radio cannot connect to a radio station

Note: If your radio is unable to connect to an internet radio station it will generally either display 'Network Error' or 'Stopped'. This can be for many reasons, but typically will be due to one of the following:

The radio station may not be broadcasting at the present time.

The radio station may not be able to accommodate any more connections

from internet listeners.

There may be network congestion (either locally or at a distance)

which is affecting the reliability of the connection.

If your radio can connect, but the audio is not continuous and the radio keeps having to reconnect, this may be due to the radio station only having limited connection capacity.

Please also refer to the section Troubleshooting on page 69.

8-9

Selecting a radio station by genre

1. Press the Menu button to enter the main Internet Radio menu. Rotate the Tuning/Select control until "Station list" is highlighted on the display. Press the Tuning/Select control to select.

2. Rotate the Tuning/Select control until 'Stations' is highlighted on the display. Press the Tuning/Select control to select.

3. Rotate the Tuning/Select control until 'Genre' is highlighted on the display. Press the Tuning/Select control.

Internet Radio

4. Rotate the Tuning/Select control to scroll through the list of content types. This menu is normally cyclic - you can scroll the list continually in either direction. When the chosen genre is highlighted, press the Tuning/Select control.

5. You then have the choice of 'All Stations' of the chosen genre, or a list of countries. Note if a country is not shown then the station may still appear in the 'All Stations' list. Rotate and then press the Tuning/Select control to choose as needed

6. A list of radio stations is then shown. Rotate the Tuning/Select control until the desired station name is highlighted on the display.

7. Press the Tuning/Select control to select the station. The display will show 'Connecting...' while it ﬁ nds the new station. If the radio is unable to connect this may be for one of the reasons explained on page 19.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

1-7

Searching for a radio station by name

There may be occasions when you know the name of a radio station but you do not know the location or genre. This facility allows you to search for the station using a part (or parts) of the radio station name.

1. Press the Menu button to enter the main Internet Radio menu. Rotate the Tuning/Select control until 'Station list' is highlighted on the display and then press the control to select.

2. Rotate the Tuning/Select control until 'Stations' is highlighted on the display and then press the control to select.

3. Rotate the Tuning/Select control until 'Search stations' is highlighted on the display and then press the control to select.

4. To enter the search word(s) rotate the Tuning/Select control to highlight each character for the search in turn, and press the Tuning/Select control to enter. If you make an error rotate the control or use the Info button to access the delete character ' press the Tuning/Select control. Rotate the control or press Info again to go back to the character selection. After the ﬁ nal character of the search has been entered, use the Info button and then the Tuning/Select control to highlight the ' then press the control to ﬁ nish.

5. The radio will search for radio stations that match your search data. If you include a space between two search items the radio will look for station names which include both items. Thus a search for 'ROCK 100' could ﬁ nd a station called '100 Classic Rock Hits' as well as a station called '100.FM Rocks'

6. Rotate the Tuning/Select control to highlight the station that you wish to listen to and press the control to conﬁ rm your choice. The display will show 'Connecting...' while it ﬁ nds a new station.

' on the screen and then

' symbol on the screen and

1-6

Selecting a new or popular station

As described in the section Introducing Internet Radio on page 17, your radio connects to an internet database of radio stations. This may highlight stations which are newly added to the list of those available or stations which are particularly popular with listeners around the world. Your radio allows you to easily choose stations from these two categories, using menus very similar to those used when ﬁ nding stations by location and genre.

1. Press the Menu button to enter the main Internet Radio menu. Rotate the Tuning/Select control until "Station list" is highlighted on the display. Press the Tuning/Select control to select.

Internet Radio

2. Rotate the Tuning/Select control until 'Stations' is highlighted on the display. Press the Tuning/Select control to select.

3. Rotate the Tuning/Select control until 'Popular stations' or New stations' is highlighted on the display. Press the Tuning/Select control.

4. Rotate the Tuning/Select control to highlight the station that you wish to listen to and press the Tuning/Select control to conﬁ rm your choice. The display will show connecting while it ﬁ nds a new station.

If the radio is unable to connect to a particular radio station this may be for one of the reasons explained on page 19.

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

1-4

+ 53 hidden pages