2. Overview of the Washing Machine
4
3. Overview of the control panel
SWF-P14
SWF-P12/SWF-P10/SWF-P8
1. Detergent dispenser
2. Display panel
Displays the remaining wash cycle time and error messages.
3. Temperature selection button
Press the button repeatedly to cycle through the available water temperature options
(cold water, 30°C, 40°C, 60°C and 95°C).
When pressing this button during washing, you can see the selected temperature in the display panel.
4. Spin selection button
Press the button repeatedly to cycle through the available spin speed options. ( no : No Spin, rh : Rinse Hold )
SWF-P14 no, rh, 400, 600, 800, 1000, 1200, 1400 rpm
SWF-P12 no, HoLd, 400, 600, 800, 1000, 1200 rpm
SWF-P10 no, HoLd, 400, 600, 800, 1000 rpm
SWF-P8 no, HoLd, 400, 600 rpm
When pressing this button during operation, you can see the selected spin speed in the display panel.
5. Delay Start button
Press the button repeatedly to cycle through the available delayed start options
(from 1 hour to 24 hours in one hour increments).
6. Function button
Press the button repeatedly to cycle through the available partial wash options { Wash+Rinse+Spin ➔ Spin ➔
Rinse(1 time)+Spin ➔ Rinse(2 times)+Spin ➔ Rinse(3 times)+Spin ➔ Wash+Rinse+Spin}.
Note : Prewash is available only with Cotton, Synthetic or Delicate programs. “Rinse (3 times)+Spin” is not available with
Speedy, Eco or Drain programs.
7. Fuzzy Control dial
Turn the dial to select one of the six or seven available wash programs.
SWF-P8/SWF-P10/SWF-P12 Cotton, Synthetic, Delicate, Wool, Speedy, Eco
SWF-P14 Cotton, Synthetic, Delicate, Wool, Speedy, Eco, Drain
8. Start/Pause button
Press to pause and restart programs.
9. Door Open button
Press to open the washing machine door.
10. (On/Off) button
O
Press once to turn the washing machine on, press again to turn the washing machine off. If the washing machine
power is left on for longer than 10 minutes without any buttons being touched, the power automatically turns off.
5